Posted: Tue Jun 03, 2008 3:29 Post subject: WRT v24 - WRT54GS v1 - interface virtuelle wifi
Salut a tous,
y a t'il quelque chose a faire pour activer une interface vituel wifi car même après avoir créé l'interface et avoir mis la sécurité que je souhaite, impossible de voir le SSID de l'interface virtuelle...
L'interface principale est bien visible.
Merci.
Last edited by o0killerbong0o on Mon Jun 09, 2008 23:35; edited 1 time in total
merci pour le mini tuto, je vais tester ça après; mais j'avais testé avec un WRT54GL v4 et je n'avais eu aucune commande a tapper... juste la configuration via l'onglet "sans-fil" avait suffit.
...toujours pareils...
Lors d'un scan des SSID, je retrouve bien la Première interface mais pas l'inface virtuel...
Quelqu'un pourrait me donner la config (isolation AP, multicast, Bridged/UnBridged, etc...
Merci d'avance.
"Pourtant sur le v4, je n'ai rien fais de spécial...Et ca fonctionnait..."
merci, mais je pense que la config coté windows n'a pas de problème..
Je n'en suis pas a mes début, j'ai utilisé un v4 pendans 2ans...jamais eu de problèmes...
Quelqu'un pourrai confirmer que les interfaces virtuelle fonctionne bien avec une V1 ..??
DD-WRT supports versions 1 through 6 of the WRT54GS router. (Note that later versions have less flash memory and may require micro versions of DD-WRT.)
[edit] v1.0
[comment added 17/05/08 by 7E0D1450]I installed dd-wrt.v24-9433_VINT_mega.bin directly from Linksys Web Interface (Firmware version 2.07.1) without problems or issues. The procedure is:
1. Hard Reset (press for 30 secs the reset button - IMPORTANT).
2. Upload the firmware from Linksys Web Interface.
3. When finished the flashing, Hard Reset (press for 30 secs the reset button - IMPORTANT).
Reference in dd-wrt forum: [1]
Quote:
Quote:
7E0D1450 wrote:
Hi, I have a Linksys WRT54GS 1.0 (serial CGN1) router with stock firmware version 2.07.1, also I have a Linksys WRT54GL 1.1 (serial CL7B) with DD-WRT v24 RC-7 build 9433 flashed succesfully by mine. But I don't know that version of DD-WRT v24 RC-7 install to my WRT54GS, there are "NEWD", "VINT" and "generic" versions and I don't know the flashing procedure (upload first the "mini" version and after the "std" version, as the WRT54GL flashing procedure, or upload inmediately the "std" or "mega" version) for the WRT54GS 1.0 router. I have plan to use the WRT54GS router in Repeater mode. Thanks for the response.
The GSv1.0 has a 4712 processor. It will run best on VINT builds but regular will also work.
Try the VINT build first. Just update it through the web gui directly.
Merci quand même, mais je suis tombé sur un topic ou il est dit que si la version de revision du driver wifi et inferieur à la rev4; il faut la vintage.
Après vérification, j'ai une rev7...donc plus stable avec une version normal...
J'ai tous essyé, est toujours impossible d'avoir mes 2 interface wifi....