Posted: Sun May 18, 2008 20:06 Post subject: Missing JFFS2 on v24 final/sp1 VPN builds
Update: Still not fixed as of V24 SP1
Short version: v24 final 'std' DOES have JFFS2, v24 final 'vpn' DOES NOT
Long version: JFFS seems to be missing, at least from the web interface of the VPN build of v24 final.
I installed the std build, in which I can enable it in the Administration tab. After that I installed the VPN build, in which JFFS is nowhere to be found.
What can I do about this?
Last edited by StrikerNL on Mon Jul 28, 2008 16:54; edited 6 times in total
you need to use an older RC7 build. JFFS2 was removed in the newer builds.
Thanks for your reply!
However, this does not seem to explain why the 'standard' v24 final build has it, but not the 'vpn' v24 final build. Or does the vpn version specifically not have JFFS2 since RC7?
you need to use an older RC7 build. JFFS2 was removed in the newer builds.
Thanks for your reply!
However, this does not seem to explain why the 'standard' v24 final build has it, but not the 'vpn' v24 final build. Or does the vpn version specifically not have JFFS2 since RC7?
Brainslayer removed JFFS to fix some problem. If i'm not wrong, VPN 9346 still has JFFS, but the WAN bandwidth counter is broken on that one. Pick your poison. _________________ RT-AC66U (asuswrt-merlin 374.43 LTS V44EA)
Xiaomi AX3600 (v1.0.67)
Well the libraries necessary for loading JFFS might be wort a few kb, no?
Still, I'm curious to see why it was removed; I mean people might install the VPN build on routers with 8MB of flash and without JFFS the remaining 4 MB go to waste.