I guess an issue should be logged in the bugtracker to add that trailer to the DD-WRT firmware.
I see the issue about the broken LAN ports (http://www.dd-wrt.com/dd-wrtv2/bugtracker/view.php?id=3055) is not assigned to anyone, this is a major bug. Anyone with a WRT600N and DD-WRT have the LAN ports working?
Joined: 17 Nov 2007 Posts: 51 Location: Grand Rapids, MI
Posted: Sun May 11, 2008 5:03 Post subject:
crackrock wrote:
I guess an issue should be logged in the bugtracker to add that trailer to the DD-WRT firmware.
I see the issue about the broken LAN ports (http://www.dd-wrt.com/dd-wrtv2/bugtracker/view.php?id=3055) is not assigned to anyone, this is a major bug. Anyone with a WRT600N and DD-WRT have the LAN ports working?
WRT600N v1.1 March 2008, LAN Ports Not Working.
Firmware: DD-WRT v24 RC-7 04/24/08 mega
Posted: Tue May 13, 2008 11:56 Post subject: LAN/WAN device BCM5397 in V1.0 and BCM5395 in V1.1
Can someone who have open his V11 (manufactred in march) see what LAN/WAN chip is used? I red somwere what Browdcom have ended BCM5397 support becose they started seling another one. What is the new LAN chip? i think it is the chip in the V11 processor
I posted dumps from the appropriate /proc/cpuinfo from wrt's firmware on my 2008 v1.1 router somewhere earlier on in this thread. Would that not be enough?
Posted: Thu May 15, 2008 14:31 Post subject: New Swich in vertion V1.1 (it start comming with buil5)
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?
Posted: Thu May 15, 2008 21:55 Post subject: Re: New Swich in vertion V1.1 (it start comming with buil5)
I don't know about a driver, but I wouldn;t say it is any worse based on the specs. On the BCM5395 page there is a product brief pdf that expands the features. Check it out: http://www.broadcom.com/collateral/pb/5395-PB00-R.pdf
It has jumbo, QOS, Vlan double tagging and everything.
malmo wrote:
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?
Joined: 17 Nov 2007 Posts: 51 Location: Grand Rapids, MI
Posted: Sat May 31, 2008 2:29 Post subject: Re: New Swich in vertion V1.1 (it start comming with buil5)
malmo wrote:
As someone write nvram dump from built 5 with is compactible with new hardware so you can see "switch_type=BCM5395". The WRT600N V1.0 had a BCM5397. The new swich is werse,it's a standard swich (and is not managet and no Jumbo frames, i think). Have someone new driver for BCM5395?
Joined: 18 Jun 2006 Posts: 1110 Location: Kiel (54.4247,10.1721)
Posted: Mon Jun 02, 2008 18:20 Post subject:
someone out there got the serial port working?
i somehow misflashed one of mine and now i can send files using tftp but it won't flash...
similar to stuff i had with one of my 350n.
would be cool to gain serial access to the cfe and maybe
flash -noheader : flash1.trx
will work just like it did for the 350N devices... _________________ DD-WRT F.A.Q. Webcam Kiel
someone out there got the serial port working?
i somehow misflashed one of mine and now i can send files using tftp but it won't flash...
similar to stuff i had with one of my 350n.
would be cool to gain serial access to the cfe and maybe
flash -noheader : flash1.trx
will work just like it did for the 350N devices...
If you have a v1.1, did you flash a trailed file? For example, the file I posted here or the official firmware v1.01.36 build 3? _________________ WRT54G v3 - v24 r14471M NEWD Eko - AP
WRT350N v1.0
WRT600N v1.1 - halfway there!
Se7en is Darker...
Last edited by jmh9072 on Mon Jun 02, 2008 21:16; edited 1 time in total
