[BrainSlayer]

rc7 does already contain asterisk. no need to installed it twice

[sashita]

[dziny]

[BrainSlayer]

the standard rc7 for instance does contain it and all other interim build postet here in the last days too

[mrdally204]

*Edit* first question I had was stupid Where exactly are the .conf files on the fonera to add in my info and create dial plans

[cgigate]

It looks like something wrong in V24 final.
"Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)"

root@DD-WRT:~# asterisk -rvvvvvv
Asterisk 1.4.18.1, Copyright (C) 1999 - 2008 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
root@DD-WRT:~#

[kamsamia]

For config enable jffs create directory /jffs/etc/asterisk

in asterisk.conf write :
astetcdir => /jffs/etc/asterisk

in startup write:
/usr/sbin/asterisk -C /jffs/etc/asterisk/asterisk.conf

the problem is astdb, even creating the folder in jffs, does not work.

[May 27 09:20:22] NOTICE[1071]: cdr.c:1369 do_reload: CDR simple logging enabled.
[May 27 09:20:22] WARNING[1071]: db.c:66 dbinit: Unable to open Asterisk database '/usr/lib/asterisk/astdb': Read-only file system
[May 27 09:20:22] NOTICE[1071]: loader.c:843 load_modules: 61 modules will be loaded.
[May 27 09:20:23] WARNING[1071]: res_musiconhold.c:804 moh_scan_files: Cannot open dir /usr/lib/asterisk/moh or dir does not exist
[May 27 09:20:23] WARNING[1071]: res_smdi.c:724 load_module: No SMDI interfaces are available to listen on, not starting SMDI listener.
[May 27 09:20:23] WARNING[1071]: app_festival.c:546 load_module: No such configuration file festival.conf
[May 27 09:20:23] WARNING[1071]: app_voicemail.c:7843 load_config: Failed to load configuration file.
[May 27 09:20:23] WARNING[1071]: chan_iax2.c:1764 reload_firmware: Error opening firmware directory '/jffs/usr/lib/asterisk/firmware/iax': No such file or directory
[May 27 09:20:23] WARNING[1071]: db.c:66 dbinit: Unable to open Asterisk database '/usr/lib/asterisk/astdb': Read-only file system
[May 27 09:20:23] NOTICE[1071]: chan_mgcp.c:4130 reload_config: Unable to load config mgcp.conf, MGCP disabled
[May 27 09:20:23] ERROR[1071]: chan_phone.c:1332 load_module: Unable to load config phone.conf
[May 27 09:20:23] WARNING[1071]: db.c:66 dbinit: Unable to open Asterisk database '/usr/lib/asterisk/astdb': Read-only file system
[May 27 09:20:23] WARNING[1071]: chan_sip.c:15964 set_insecure_flags: insecure=very at line 40 is deprecated; use insecure=port,invite instead
[May 27 09:20:24] NOTICE[1071]: chan_skinny.c:4646 reload_config: Unable to load config skinny.conf, Skinny disabled
[May 27 09:20:24] NOTICE[1090]: chan_sip.c:12532 handle_response_peerpoke: Peer 'voipstunt' is now Reachable. (149ms / 1000ms)
/usr/sbin/asterisk: can't resolve symbol 'cosf'
root@DD-WRT:~# [May 27 09:20:24] NOTICE[1090]: chan_sip.c:12532 handle_response_peerpoke: Peer 'skypho-out' is now Reachable. (168ms / 2000ms)

root@DD-WRT:~#

[mrdally204]

Thanks kamsamia for the location. You also mention editing an asterisk.conf file in which I do not recall seeing either in my search for conf files. You mind locating that for me as well. Thanks for all the help you have given back to this great community

[fpaliuc]

[trottm]

I have Asterisk running on an SD modded WRT54GL but woud like to get it running on an old 2100 Fonera. Can RC7 be loaded onto the Fonera without the SD mod, I couldn't seem to work it out from ths thread? Is asterisk working OK in that form?

[sblanco]

[cpe-eagle]

Hello,

I am wondering, I have a WRT54GS v3 with DD-WRT build 11793 w/voip is it hard to install asterisk onto it? I right now have on my computer asterisk 1.4 soon hopefully will update to 1.6 Do I need do any thing speaical, also my router is setup so one port gets it own IP address and the other ports have one other IP address along with wifi using that same outside IP.

Any help would be gratful.

Sincerely,
Christopher

[robertut]

[samuraijack1]

I have installed asterisk on my Asus WL-500G Premium V2 with optware on a USB Flash Drive according to the above post. The calls between the clients behind the NAT work fine. But when a client from outside calls, it rings the extension being called but when answered the caller can hear the voice but not the other way around. Also the call drops automatically after a few seconds. I have configured my sip.conf and rtp.conf to deal with NAT issues according to this http://wiki.ljackson.us/Asterisk_Firewall. I have also forwarded the following ports on my ddwrt mega router as below.

ports 5060 and 5061 to asterisk server with IP 192.168.10.1 (main asterisk control ports)
ports 10000 to 20000 to asterisk server with IP 192.168.10.1 (rtp ports for audio)
My sip.conf changes:
;settings for NAT issues
externip = xxxxxx.dyndns.org
localnet = 192.168.10.0/255.255.255.0
canreinvite=no;

I was successfully running an asterisk server with these settings on a windows box with IP 192.168.10.130. But these are not working for the asterisk on the asus router anymore for me. I am using xxxx.dyndns.org so externip in sip.conf has no issue of being changed. The output of my /tmp/.ipt looks like this.
*mangle
:PREROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
COMMIT
*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A PREROUTING -p tcp -m tcp -d 67.164.43.200 --dport 22 -j DNAT --to-destination 192.168.10.1:22
-A PREROUTING -p icmp -d 67.164.43.200 -j DNAT --to-destination 192.168.10.1
-A PREROUTING -p tcp -m tcp -d 67.164.43.200 --dport 3389 -j DNAT --to-destination 192.168.10.130:3389
-A PREROUTING -p udp -m udp -d 67.164.43.200 --dport 3389 -j DNAT --to-destination 192.168.10.130:3389
-A PREROUTING -p tcp -m tcp -d 67.164.43.200 --dport 5060 -j DNAT --to-destination 192.168.10.1:5060
-A PREROUTING -p udp -m udp -d 67.164.43.200 --dport 5060 -j DNAT --to-destination 192.168.10.1:5060
-A PREROUTING -p tcp -m tcp -d 67.164.43.200 --dport 5061 -j DNAT --to-destination 192.168.10.1:5061
-A PREROUTING -p udp -m udp -d 67.164.43.200 --dport 5061 -j DNAT --to-destination 192.168.10.1:5061
-A PREROUTING -p tcp -m tcp -d 67.164.43.200 --dport 10000:20000 -j DNAT --to-destination 192.168.10.1
-A PREROUTING -p udp -m udp -d 67.164.43.200 --dport 10000:20000 -j DNAT --to-destination 192.168.10.1
-A PREROUTING -d 67.164.43.200 -j TRIGGER --trigger-type dnat
-A POSTROUTING -o vlan1 -j MASQUERADE
-A POSTROUTING -o br0 -m pkttype --pkt-type broadcast -j RETURN
-A POSTROUTING -o br0 -s 192.168.10.0/24 -d 192.168.10.0/24 -j MASQUERADE
COMMIT
*filter
:INPUT ACCEPT [0:0]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
:logaccept - [0:0]
:logdrop - [0:0]
:logreject - [0:0]
:trigger_out - [0:0]
:lan2wan - [0:0]
:grp_1 - [0:0]
:advgrp_1 - [0:0]
:grp_2 - [0:0]
:advgrp_2 - [0:0]
:grp_3 - [0:0]
:advgrp_3 - [0:0]
:grp_4 - [0:0]
:advgrp_4 - [0:0]
:grp_5 - [0:0]
:advgrp_5 - [0:0]
:grp_6 - [0:0]
:advgrp_6 - [0:0]
:grp_7 - [0:0]
:advgrp_7 - [0:0]
:grp_8 - [0:0]
:advgrp_8 - [0:0]
:grp_9 - [0:0]
:advgrp_9 - [0:0]
:grp_10 - [0:0]
:advgrp_10 - [0:0]
-A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT
-A INPUT -p udp -i vlan1 --dport 520 -j DROP
-A INPUT -p udp -i br0 --dport 520 -j DROP
-A INPUT -p udp --dport 520 -j ACCEPT
-A INPUT -p tcp -m tcp -d 192.168.10.1 --dport 22 -j logaccept
-A INPUT -i vlan1 -p icmp -j DROP
-A INPUT -p igmp -j DROP
-A INPUT -p udp -i vlan1 --dport 5060 -j ACCEPT
-A INPUT -i lo -m state --state NEW -j ACCEPT
-A INPUT -i br0 -m state --state NEW -j logaccept
-A INPUT -j DROP
-A FORWARD -i br0 -o br0 -j ACCEPT
-A FORWARD -m state --state INVALID -j logdrop
-A FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu
-A FORWARD -j lan2wan
-A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
-I FORWARD -o vlan1 -s 192.168.10.1/24 -p tcp --dport 1723 -j ACCEPT
-I FORWARD -o vlan1 -s 192.168.10.1/24 -p gre -j ACCEPT
-A FORWARD -p tcp -m tcp -d 192.168.10.130 --dport 3389 -j ACCEPT
-A FORWARD -p udp -m udp -d 192.168.10.130 --dport 3389 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 192.168.10.1 --dport 5060 -j ACCEPT
-A FORWARD -p udp -m udp -d 192.168.10.1 --dport 5060 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 192.168.10.1 --dport 5061 -j ACCEPT
-A FORWARD -p udp -m udp -d 192.168.10.1 --dport 5061 -j ACCEPT
-A FORWARD -p tcp -m tcp -d 192.168.10.1 --dport 10000:20000 -j ACCEPT
-A FORWARD -p udp -m udp -d 192.168.10.1 --dport 10000:20000 -j ACCEPT
-A FORWARD -i vlan1 -o br0 -j TRIGGER --trigger-type in
-A FORWARD -i br0 -j trigger_out
-A FORWARD -i br0 -m state --state NEW -j ACCEPT
-A FORWARD -j DROP
-A lan2wan -j grp_1
-A logaccept -j ACCEPT
-A logdrop -j DROP
-A logreject -p tcp -m tcp -j REJECT --reject-with tcp-reset
COMMIT

Any help would be highly appreciated.

[cgigate]