Cfe collection project -See Pg 9 for FTP server info

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4 ... 21, 22, 23  Next
Author Message
WillemB
DD-WRT Novice


Joined: 13 Apr 2008
Posts: 16

PostPosted: Wed Apr 16, 2008 6:22    Post subject: Reply with quote
punker_4_real wrote:
WillemB wrote:
Product: ASUS WL500g Premium (v1)
FCC ID: MSQWL500GP
ASUS Type ID: 66IEAC125417
Method: SSH (using dd to get CFE)

Flash Chip (I believe):

SPANSION Copyright 2004
S29GL064M90TF1R7
0527MBM N

Datasheet: http://www.spansion.com/datasheets/s29gl-m_00_b8_e.pdf


BTW: Holy @#$@# I have 64MB of flash memory ?!?! Doe this mean ASUS didn't make all available?!? ... Next question is can I use this for jffs2 somehow ?!?




64Megabits only 8 megabytes Laughing Laughing Laughing Laughing Laughing Laughing Laughing Laughing Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Laughing Laughing Laughing Laughing Laughing Laughing Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Rolling Eyes Confused Confused Confused Confused Confused Confused


Let me cool my soldering iron then Wink
Sponsor
jvilla
DD-WRT Novice


Joined: 10 Jul 2007
Posts: 4

PostPosted: Sun Apr 20, 2008 5:47    Post subject: Reply with quote
i need cfe for linksys wrt54g v1.0 if anyone has it. my email is jvilavong@gmail.com
anthonymo
DD-WRT User


Joined: 09 Apr 2008
Posts: 266

PostPosted: Sun Apr 20, 2008 22:48    Post subject: Reply with quote
WRT54G V2 and WR850G V2 sent...

BTW do you have a list somewhere of the ones you have recieved so far?

_________________
--------------------------------
WRT-54G V2 Running 16403M VINT Eko std-nokaid
WR850G V2 Running v24-Sp1 10011 mini
Ubnt Routerstation running 16785 Std
Cisco Valet (M10)16773M NEWD-2 K2.6 Eko std-nokaid-small
simkiss
Donator


Joined: 08 Mar 2008
Posts: 239
Location: Wayne, PA

PostPosted: Tue Apr 22, 2008 23:35    Post subject: Reply with quote
Emailed:

1). Linksys WRT54G v1.1
2). FCCID: Q87-WRT54G11
IC: 3839A-WRT54G11
3). WinSCP
4). No flash chip data...sorry.
5). Other information: Firmware: DD-WRT v23 SP2 (09/15/06) vpn

Thanks for your great work on DD-WRT.

jas3



cfe.bin
 Description:

Download
 Filename:  cfe.bin
 Filesize:  256 KB
 Downloaded:  2708 Time(s)

simkiss
Donator


Joined: 08 Mar 2008
Posts: 239
Location: Wayne, PA

PostPosted: Wed Apr 23, 2008 13:26    Post subject: Reply with quote
Emailed:

1) Netgear Rangemax Next Wireless N Router: WNR834Bv2
2) FCCID: PY307100061
IC: 4054A-07100061
3) GUI
4) sorry, I don't have the flash chip data
5) Firmware: DD-WRT v24 RC-7 (04/11/08) vpn. I'm running OpenVPN on this and it works beautifully.

Thanks for your work with DD-WRT. $100 donation to follow in May.

jas3



cfe.bin
 Description:

Download
 Filename:  cfe.bin
 Filesize:  128 KB
 Downloaded:  2473 Time(s)


_________________
~Netgear WNR834Bv2~ DD-WRT v24-sp2 (12/07/09) vpn-small (SVN revision 13401M NEWD Eko)

~Linksys WRT54Gv6~ DD-WRT v24-sp2 (10/10/09) micro (SVN revision 13064)

~ASUS WL-500G Premium~ DD-WRT v24-sp2 (12/07/09) big (SVN revision 13401M NEWD Eko)
laotech
DD-WRT Novice


Joined: 20 Apr 2008
Posts: 7

PostPosted: Thu Apr 24, 2008 9:41    Post subject: CFE Reply with quote
I have two questions about CFEs:
1. Are they flash-chip specific? If two routers are the same model and processor but have different flash chips, can they use the same CFE?

2. When I use someone else's CFE, is it necessary to change the MAC address? How do I change it?
redhawk0
DD-WRT Guru


Joined: 04 Jan 2007
Posts: 11563
Location: Wherever the wind blows- North America

PostPosted: Fri Apr 25, 2008 16:10    Post subject: WAPv3.1-RB-mode-V24-RC7-9433-wholeflash Reply with quote
I am posting a working wholeflash.bin file for a WAPv3.1 unit.


[EDIT] - you need to do a hard reset after loading this wholeflash.bin to your unit....I won't be giving out my password for the root account....hard reset will set it back to defaults of root/admin

[EDIT-02/04/09] - These steps no longer needed. WAPver=3 is now embedded in the wholeflash listed below

You will then need to put this back in Administration>>Command - Run it...then Set as Startup

nvram set WAPver=3
nvram commit

Now reboot again...or power cycle the unit.


It has V24 - RC7-9433 firmware and a custom MAC address.

Feel free to use JTAG to load it This is for a WAPv3.1 unit only.

redhawk



WHOLEFLASH-V24-RC7-9443-WAPv3.1-Repeater-Bridge.BIN
 Description:

Download
 Filename:  WHOLEFLASH-V24-RC7-9443-WAPv3.1-Repeater-Bridge.BIN
 Filesize:  2 MB
 Downloaded:  6017 Time(s)


_________________
The only stupid question....is the unasked one.


Last edited by redhawk0 on Wed Feb 04, 2009 13:07; edited 2 times in total
meex
DD-WRT User


Joined: 26 Dec 2006
Posts: 127
Location: Würzburg, Germany

PostPosted: Sun Apr 27, 2008 10:02    Post subject: Reply with quote
Linksys WRT350N Version 1
Hardware rev: v1.0 (ser#:CNQ)
Mode of backup: GUI

FCC ID: Q87-WRT350N
Platform & Frequency [MHz]: Broadcom4785@300
RAM [MB]: 32
Flash Memory [MB]: 8
Wireless NIC: Broadcom
WLAN standard [802.11]: b/g/n
mini PCI: 1
Serial port: 1
JTAG port: yes
Ethernet port count: 4 LAN/1 WAN
Voltage Input [V/A]: 12V/1.5A
Special Features/notes: 1 USB 2.0, 1000BaseT (gigabit) switch

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Mon Oct 30 23:08:09 CST 2006 (root@linux)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

CPU: BCM4785 rev 2 at 300 MHz

ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 32768 KBytes

Boot version: ==> v4.2
The boot is CFE

Linux version 2.4.35 (root@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #1711 Thu Apr 24 05:37:36 CEST 2008



WRT350N_Ver1_CFE.bin
 Description:

Download
 Filename:  WRT350N_Ver1_CFE.bin
 Filesize:  256 KB
 Downloaded:  3245 Time(s)


_________________
eyeshare
DD-WRT Novice


Joined: 10 May 2008
Posts: 1

PostPosted: Sun May 11, 2008 9:13    Post subject: Reply with quote
i need cfe for linksys wrt54g v1.0 if anyone has it. my email is eyeshare@hotmail.com. Thanks again.
pt880
DD-WRT Novice


Joined: 14 May 2008
Posts: 1

PostPosted: Wed May 14, 2008 14:54    Post subject: Reply with quote
i need cfe for buffalo wzr-hp-g54 if anyone has it. my email is pt880@126.com. Thanks again.
mojso
DD-WRT User


Joined: 09 Sep 2007
Posts: 232
Location: Macedonia

PostPosted: Mon May 19, 2008 16:53    Post subject: Reply with quote
A cfe backup made via web interface
DD-WRT v24 (05/16/0Cool std in wrt54gl v1.1
CPU Model Broadcom BCM5352 chip rev 0



cfe.zip
 Description:

Download
 Filename:  cfe.zip
 Filesize:  104.99 KB
 Downloaded:  2732 Time(s)

tonytone
DD-WRT Novice


Joined: 20 May 2008
Posts: 3

PostPosted: Tue May 20, 2008 17:32    Post subject: Reply with quote
Sent cfe for WRT54G v6.
DD-WRT v24 (05/20/0Cool micro
(SVN revision 9517)
th0m4s
DD-WRT Novice


Joined: 17 May 2008
Posts: 8

PostPosted: Thu May 22, 2008 13:30    Post subject: Reply with quote
Just mailed CFE from D-Link DIR-300.
DummyPLUG
DD-WRT User


Joined: 09 Jun 2006
Posts: 146

PostPosted: Tue May 27, 2008 12:58    Post subject: Reply with quote
1) WZR-RS-G54
3) GUI
4) a toshiba one, forget what exactly
5) as I remember, BS one is using intel flash, mine and other one using toshiba flash



WZR-RS-G54.rar
 Description:

Download
 Filename:  WZR-RS-G54.rar
 Filesize:  87.09 KB
 Downloaded:  2376 Time(s)

Seth7
DD-WRT Guru


Joined: 16 Aug 2006
Posts: 670
Location: DN17IQ

PostPosted: Wed May 28, 2008 2:16    Post subject: Reply with quote
wow.. glad this is finally taking off.... i have some posted on some one's server ... damn if i know where ... been some time ...
_________________
WRT54G,GS v1.1, V2, V3 V4, V5
WR850G V2, V3
Fonera 2100
Goto page Previous  1, 2, 3, 4 ... 21, 22, 23  Next Display posts from previous:    Page 3 of 23
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum