I should have the resistors to add to the board in a couple of days.
Can someone give a step by step on what to try after I get them soldered on to see if it worked? I am going to build an unbuffered Xilinx jtag cable to try this out.
I'm running dd-wrt.v24-9396_NEWD_openvpn.bin. I'm having some performance problems however. The maximum speed i'm getting in a N-only evironment is ~5MByte/s. I've tried setting the channel width to 40MHz and tried playing with the "wide channel" control, but to no avail. What does "wide channel" do anyway?
My client is a MacBook Pro with its internal Atheros AR5008 card.
Does anybody have some tips for me how to tune the performance?
Posted: Mon Apr 21, 2008 0:54 Post subject: Poor performance wireless using last 3 builds of eko's
I get the same problem as a previous poster wireless performance on the last couple of builds of dd-wrt v24 on the 834v2 is pretty poor only getting between 2 and 4 Mbps but using the ethernet connection getting 20meg thru to speedtest.net (20meg isp connection)
Well, no luck. I added the 4.75k resistors but still can't seem to get the jtag working on this. I hate to think this thing is a paper weight now. If anyone has any other advice I would really appreciate the help. The router seems to be stuck, when I power it up I get about 4 ping responses then it stops responding. tftp is not working, it just times out after about a minute. When I plug it in the power LED is amber and the wireless LED is very dim. Thanks
