computmaxer DD-WRT Novice
Joined: 11 Jul 2007 Posts: 17 Location: Iowa, USA
|
Posted: Wed Mar 19, 2008 19:58 Post subject: Need help reviving f*n with usb serial cable! |
|
Hello,
I recently purchased a cell phone usb-serial interface cable and made it into a serial cable for my fon routers.
One of my fon routers is bricked, so I am trying to use my new cable to fix it. I start Putty, plug in my fon router, and then attach the serial interface to the fon router after 5 seconds.
This is what I get:
"
Quote: | +PHY ID is 0022:5521
Ethernet eth0: MAC address 00:18:84:14:8a:c4
IP: 0.0.0.0/255.255.255.255, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.0 - built 16:57:58, Aug 7 2006
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: ap51
RAM: 0x80000000-0x81000000, [0x80040450-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> fis load -l vmlinux.bin.l7
lzma_decode failed. res=1
RedBoot> exec
Now booting linux kernel:
Base address 0x80030000 Entry 0x80041000
Cmdline :
|
"
nothing I type in does anything.
If I press Control-C while it's booting I get this:
"
Quote: | +PHY ID is 0022:5521
Ethernet eth0: MAC address 00:18:84:14:8a:c4
IP: 0.0.0.0/255.255.255.255, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version v1.3.0 - built 16:57:58, Aug 7 2006
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
Board: ap51
RAM: 0x80000000-0x81000000, [0x80040450-0x80fe1000] available
FLASH: 0xa8000000 - 0xa87f0000, 128 blocks of 0x00010000 bytes each.
== Executing bo/` script in 1.000 seconds - enter ^C to abort
ô |
"
And then nothing happens.
Can someone help me out? |
|