[blkt]

Welcome to Broadcom r62966 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r62890 (mirror)

• OpenVPN 2.6.15: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r61542 r61557 r61613 r61648 r61711 r61745 r61848 r61915 r61920 r61954 r61970 r61981 r62032 r62036 r62104 r62157
r62170 r62192 r62240 r62268 r62324 r62365 r62374 r62418 r62460 r62508 r62540 r62606 r62778 r62890 r62966

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[egc]

Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r62966M Community Build (12/07/25)
Kernel Version: Linux 4.4.302-rt232-st70 #1 SMP Sun Dec 7 08:17:20 CET 2025 armv7l

Upgraded from Firmware by egc: DD-WRT v3.0-r62890M Community Build (12/01/25) using patched build so GUI update is working without a problem for this Xvortex CFE upgrade 😃

Reset: No not this time.

Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Four WireGuard tunnels running, one Server, one site-to-site and two clients in Fail-over group to Mullvad (of course with PBR to allow the WG server to use the WAN), using MAC address and IPv4 and IPv6 IPSET.
DDNS (dynv6) working.
IPv6 working.
CTF&FA Enabled
NVRAM size 46KB (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 2 hours

Errors: none so far

Thanks BS!!

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r62966 std (12/06/25)
Kernel Version Linux 4.4.302-rt232-st70 #14669 SMP Sat Dec 6 08:25:14 +07 2025 armv7l


update CLI 62924 > 62966
reset:No
status:OK
mode: set up from my signature...
errors: hmm this is something new...

Dec 7 08:53:07.531 R7000 daemon.warn dnsmasq[1210]: nameserver 127.0.0.1 refused to do a recursive query

I ve read about it....just saying...its a new to me...

also those few...
Jan 1 00:00:16.399 R7000 daemon.crit dnsmasq[1534]: failed to bind DHCP server socket: Address in use
Jan 1 00:00:16.399 R7000 daemon.crit dnsmasq[1534]: FAILED to start up
Jan 1 00:00:16.399 R7000 user.info : [dnsmasq] : Error on startup, returncode 2

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r62966_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st70 #42272 Sat Dec 6 10:06:46 +07 2025 mips
Previous/Reset: 62924 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:38 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[Wildlion]

Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp-webflash.bin (v3.0-r62966 std)
Kernel: Linux 4.4.302-rt232-st70 #14669 SMP Sat Dec 6 08:25:14 +07 2025 armv7l
Status: Working
Reset: No
Notes on configuration:

SFE -- Disabled

Errors:

None

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r62966) / Linux 4.4.302-rt232-st70 #14669 SMP Sat Dec 6 08:25:14 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r62924 std (12/04/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server (for mobile) & client (for site-to-site with static route on PC) + Cron / working
Issues/Errors: none

[Vercety]

---------------------------------------------------------
Router/Version: Asus RT-N66U
File/Kernel: dd-wrt-62890-Asus_RT-AC66U 01-Dec-2025.trx/Linux 4.4.302-rt232-st68 #42080 Mon Dec 1 05:16:28 +07 2025 mips
Previous/Reset: r62778_21-11-2025/no
Mode/Status: ap/up 8h
Issues/Errors: no
CPU Temperature: WL0 48.5 °C
---------------------------------------------------------
Router/Version: Asus RT-AC68U E1
File/Kernel: asus_rt-ac68u-firmware 01-Dec-2025.trx/Linux 4.4.302-rt232-st68 #14614 SMP Mon Dec 1 03:25:02 +07 2025 armv7l
Previous/Reset: r62778_21-11-2025/no
Mode/Status: ap/up 8h
Issues/Errors: no
CPU Temperature: CPU 52.5 °C WL0 48.0 °C WL1 51.5 °C
---------------------------------------------------------
Router/Version: Asus RT-N18U
File/Kernel: asus_rt-n18u-firmware 01-Dec-2025.trx/Linux 4.4.302-rt232-st68 #14618 Mon Dec 1 04:01:28 +07 2025 armv7l
Previous/Reset: r62778_21-11-2025/no
Mode/Status: ap/up 8h
Issues/Errors: no
CPU Temperature: CPU 47.5 °C WL0 40.0 °C
---------------------------------------------------------
Router/Version: Asus RT-AC3200
File/Kernel: asus_rt-ac3200-firmware 01-Dec-2025.trx/Linux 4.4.302-rt232-st68 #14619 SMP Mon Dec 1 04:14:34 +07 2025 armv7l
Previous/Reset: r62778_21-11-2025/no
Mode/Status: ap/up 8h
Issues/Errors: wifi 5 1. shows only 36 and 44ch, wifi5 2. do not shows higher range on https://i.imgur.com/q4xBR1v.jpeg, channels,2.4ghz wifi got only 4 vaps max
CPU Temperature:CPU 45.2 °C WL0 41.5 °C WL1 39.0 °C
---------------------------------------------------------
Router/Version: Asus RT-AC87U
File/Kernel: asus_rt-ac87u-firmware 01-Dec-2025.trx/Linux 4.4.302-rt232-st68 #14622 SMP Mon Dec 1 04:40:32 +07 2025 armv7l
Previous/Reset: r62778_21-11-2025/no
Mode/Status: ap/up 8h
Issues/Errors: https://i.imgur.com/I7ImNqw.jpeg wl1 sensor dont work,cant change channel https://i.imgur.com/PMIExJp.jpeg
CPU Temperature: CPU 59.1 °C WL0 42.0 °C WL1 0.0 °C
---------------------------------------------------------

[KACTET]

Router/Version: Asus RT-AC88U
Update method: WebUpgrade
File/Kernel: asus_rt-ac88u-firmware.trx_r62966 std / Linux 4.4.302-rt232-st70 #14674 SMP Sat Dec 6 09:02:14 +07 2025 armv7l
Previous/Reset: r62924 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 5:02 hours
CPU Temperature: CPU 77.1 °C / WL0 50.3 °C / WL1 48.3°C (ambient temperature 20.1 °C)
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[lost+found]

Router/Version: Linksys E2000
File/Kernel: dd-wrt.v24-62966_NEWD-2_K3.x_mega-e2000.bin / Linux dd-wrt 4.4.302-rt232-st70 #42276 Sat Dec 6 10:12:32 +07 2025 mips DD-WRT
Previous/Reset: dd-wrt.v24-62924_NEWD-2_K3.x_mega-e2000.bin, upgrade via web interface, no resets this time
Mode/Status: EmErGeNcY gateway, Dnsmasq client/server config, NATv4 + "NATv6"
Issues/Errors: no (saved some RAM though)

Oldie, runs fine.

Thanks

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r62966 std / Linux 4.4.302-rt232-st70 #14677 SMP Sat Dec 6 09:22:17 +07 2025 armv7l
Previous/Reset: 62924 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 5:03 hours
CPU Temperature: CPU 76.3 °C / WL0 46.7 °C / WL1 0.0 °C (ambient temperature 20.1 °C)
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!