Posted: Fri Oct 17, 2025 14:52 Post subject: New Build - 10/17/2025 - r62365
Welcome to x86 / x64 r62365 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r62365 std (10/17/25) (prev. DD-WRT v3.0-r62268 std (10/09/25))
Kernel: Linux 6.12.53 #295 SMP Fri Oct 17 07:37:57 +07 2025 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, Automatic Drive Mount disabled - using own mount script for USB Disk, nfs to access USB3-ext4 SSD, Force reconnect 5:00 in the morning, using my own local NTP, CPU governour set to ondemand by script, Ignore WAN DNS, Recursive DNS Resolving (Unbound), using NAT66.
Reset: No
Status: Installed yesterday, multiple things to report:
1)
Update via Webgui did not end after the usual "a few seconds" timespan, but it took the whole timer to count down to 0.
Then router rebooted and GUI was back.
2)
PPPoE does not autoconnect after reboot.
Despite being setup to do so, the first connect has to be done by hand.
This behaviour started with six builds before previous release, if my counting is correct.
This can be done by either by clicking "Status" --> "WAN" --> "Connect"
or
by changing someting under "Setup" --> "Basic Setup" and hitting "Save & Apply".
Only then /var/log/messages reads:
Code:
Oct 18 08:52:32.069 N4000 daemon.info pppd[5803]: Plugin /usr/lib/rp-pppoe.so loaded.
Oct 18 08:52:32.166 N4000 daemon.notice pppd[5804]: pppd 2.4.8 started by root, uid 0
Oct 18 08:52:32.166 N4000 user.info : [pppd] : successfully started
Oct 18 08:52:32.184 N4000 user.info : [ppp_redial] : successfully started
Oct 18 08:52:37.345 N4000 daemon.info pppd[5804]: Using interface ppp0
Oct 18 08:52:37.345 N4000 daemon.notice pppd[5804]: Connect: ppp0 <--> eth0.0007
Forced reconnect to a time set works after this without a flaw.
3)
Code:
iperf3 -c anyiperfserver -6
sports max upstream when used on this N4000 router.
Code:
iperf3 -c anyiperfserver -6
sports 1-5 Mbit/s upstream when used in my network behind it.
This behaviour started unbeknownst to me, and I encountered it four releases back.
Possible this is related to me using nat66 in my network.
--> installing entware's ethtool and setting "rx-gro-list" to "off" for the LAN facing ETH port fixes this.
Posted: Sun Oct 19, 2025 11:31 Post subject: New Build - 10/17/2025 - r62365
Gigabyte Technology Co., Ltd. Z97X-Gaming 3 Intel(R) Core(TM) i7-5775C CPU @ 3.30GHz up and running 1 day, 23 min automatic configuration-dhcp Shortcut Forwarding Engine disable seems like a good build thanks devs. Also running a netgear wndr 4300 with current build as my wifi solution which is also doing well.
Router/Version: Gigabyte board with 32GB ram and 4770K bootable SSD SATA
File/Kernel: dd-wrt_x64_full_vga.image
Previous/Reset: YES
Mode/Status: Router with NAS
Issues/Errors: YES the Realtek NIC 8125B still does not work.
During boot on NIC detection each port of the 6 port card says r8169 can't modprobe error -5
