Posted: Mon Oct 13, 2025 8:00 Post subject: New Build - 10/13/2025 - r62324
Welcome to Atheros r62324 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Mon Oct 13, 2025 11:29 Post subject: WR841ND
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r62324 / Linux 3.18.140-d6 #248217 Mon Oct 13 05:40:56 +07 2025 mips
Previous/Reset: r62268 / no
Mode/Status: AP wired and wireless / Up and running for 4:02
Issues/Errors: Nothing significant
If your router's light turns red, don't worry. Internet connection is ok.
Incorrect rate of wlan0 - 800 Mbit/s!
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 62032
Broadcom
Asus RT-AC88U - DD-WRT 62032
Asus RT-AC87U R - DD-WRT 62032
Asus RT-N66U - DD-WRT 62032
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 08 Jun 2023 Posts: 118 Location: Essex. England.
Posted: Mon Oct 13, 2025 13:06 Post subject:
Router/Version: Netgear Nighthawk XR700
File/Kernel: r62324
Previous/Reset: r57753 / No
Uptime: Less than 1 hour.
Issues/Errors: After 20 Mins No Internet connection.
Router Wifi 2.4 & 5 GHz lights only work with a hack (enable Noise Reduction).
Status/Bandwidth Mind-blowingly small.
Router log Errors see pictures.
Unusable back to r57753
Setup: Connection Type Automatic config - DHCP
Operating Mode Gateway/AP
Web Access Protocol – https
SSH (public key)
Wireguard VPN (Surfshark)
Wireguard Server
Wireless Interface Regulatory Domain UK, 5GHz Wireless Mode AP-Wireless Network Mode-AC / N, Width VHT 80 Mhz-Wireless Channel-100, Extension Channel UU+6, Short GI, Short Preamble, Single User Beamforming, TX Power-26 dBm,TX Antenna Chains-1+2+3+4, RX Antenna Chains-1+2+3+4, Enable-WPA2 - WPA3 Personal / SAE-CCMP-128 (AES).
Wireless Interface 2.4GHz Wireless Mode AP-Wireless Network Mode-N/G Mixed, Width Full 20 Mhz-Wireless Channel-1, TurboQAM (QAM256), Short Preamble, Short GI, TX Power-20 dBm, TX Antenna Chains-1+2+3+4, RX Antenna Chains1+2+3+4, Enable-WPA2 - WPA3 Personal / SAE-CCMP-128 (AES).CCMP-128 (AES).
3.jpg
Description:
Filesize:
223.75 KB
Viewed:
1656 Time(s)
2.jpg
Description:
Filesize:
447.37 KB
Viewed:
1656 Time(s)
1.jpg
Description:
Filesize:
165.69 KB
Viewed:
1656 Time(s)
Last edited by Wizo on Mon Oct 13, 2025 13:35; edited 2 times in total
Joined: 04 Dec 2007 Posts: 1243 Location: Murrysville, PA
Posted: Mon Oct 13, 2025 13:18 Post subject: Bug Found, Reproducible, Not a Show Stopper
I found a bug. I've reproduced it three times. Clicking on the "Wireless" tab in the UI causes httpd to crash (I caught it in the logs, attached). Connecting to the router via PuTTY and issuing "restart httpd" restores the UI. Only the UI seemed to crash. All other functions seemed unaffected.
Posted: Mon Oct 13, 2025 16:47 Post subject: Re: Bug Found, Reproducible, Not a Show Stopper
MLandi wrote:
I found a bug. I've reproduced it three times. Clicking on the "Wireless" tab in the UI causes httpd to crash (I caught it in the logs, attached). Connecting to the router via PuTTY and issuing "restart httpd" restores the UI. Only the UI seemed to crash. All other functions seemed unaffected.
Router/Version: Linksys MR7350 DD-WRT v3.0-r62324 std (10/13/25)
Kernel: Linux 6.6.111-rt29 #4242 SMP Mon Oct 13 00:12:21 +07 2025 aarch64
Previous/Reset: DD-WRT v3.0-r62036 std (08/08/25) no reset
Mode/Status: AP / Gateway / WAN auto-config DHCP / Wireguard client Mullvad / QCA-NSS subsystem enabled / SFE disabled / DHCP / DNSmasq / Firewall
Uptime: 20 hours
Issues/Errors: Same httpd crash when clicking the wireless tab as reported above, but otherwise a very solid release so far.
Router/Version: Netgear R7800 (x2) DD-WRT v3.0-r62324 std (10/13/25)
Kernel: Linux 6.1.155-rt28 #621 SMP Mon Oct 6 02:14:19 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r62036 std (08/08/25) no reset
Mode/Status: AP / SFE disabled / Firewall disabled
Uptime: 20 hours
Issues/Errors: Same httpd crash when clicking the wireless tab as reported above, but otherwise a very solid release so far.
Posted: Tue Oct 14, 2025 11:43 Post subject: Linksys MR7350
Update method: WebUpgrade
Router/Version: Linksys MR7350
File: 62324
Previous/Reset: 62192 / no
Mode/Status: Gateway / ok
Issues/Errors: If you are seeing this post, all is ok
Thank you again BS and friends.
��
Up 10 minutes. Upon upgrade, the two APs came up fine, but the gateway router appeared to be in a boot loop. It would ping about 20 times, the GUI would come up briefly, then the router would reboot. After at least 4 cycles of this, it stabilized on it's own. No explanation or logs as I didn't have syslog sending the logs anywhere. Now that's it's stable, my IOT devices seem to be connecting properly, so the guest network is working as expected. As stated by others in the thread, clicking on the Wireless/Basic tab causes the GUI to crash, but going directly to the /WL_WPATable.asp page works, as do the Roaming and MAC Filter tabs.
I'll give it more time and see if it stays stable.
Thank you Brainslayer. _________________ Formerly dpp3530 Linksys MR7350
Gateway, 2 wired APs, NSS-ECM , Clock 1440MHz
VAPs on wlan0 and wlan1 for guest/IOT devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (DOT using NextDNS, Cloudflare), DNSMasq
Wireguard and OpenVPN server
2.4GHz: dd-wrt, AX Only, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
5GHz: dd-wrt, AX/AC/N Mixed, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
Verizon Fios, 500/500Mbps
Joined: 21 Jan 2017 Posts: 1797 Location: Illinois Moderator
Posted: Wed Oct 15, 2025 19:24 Post subject: Re: Bug Found, Reproducible, Not a Show Stopper
MLandi wrote:
I found a bug. I've reproduced it three times. Clicking on the "Wireless" tab in the UI causes httpd to crash (I caught it in the logs, attached). Connecting to the router via PuTTY and issuing "restart httpd" restores the UI. Only the UI seemed to crash. All other functions seemed unaffected.
Sadly it still happens on nightly 62353 on the MR7500. I think BS may have fixed in in 62355, but will have to wait for that nightly to drop to see if his typo fixes fix the wireless tab crash. _________________ FORUM RULES
Joined: 07 Jan 2025 Posts: 222 Location: Bethel Park, PA, USA
Posted: Thu Oct 16, 2025 18:38 Post subject:
dplotz wrote:
I'll give it more time and see if it stays stable.
Right at 20 hours, one of my APs suddenly dropped all wifi connections on 5GHz. Even a reboot didn't bring it back. Did a restore of the config I had been using (from an earlier version) and it worked again. An hour or so later, the second AP did the same. I gave up and rolled back to r61848. _________________ Formerly dpp3530 Linksys MR7350
Gateway, 2 wired APs, NSS-ECM , Clock 1440MHz
VAPs on wlan0 and wlan1 for guest/IOT devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (DOT using NextDNS, Cloudflare), DNSMasq
Wireguard and OpenVPN server
2.4GHz: dd-wrt, AX Only, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
5GHz: dd-wrt, AX/AC/N Mixed, ACK Timing 1350, WPA3 SAE & WPA2 w/AES
Verizon Fios, 500/500Mbps
Joined: 08 May 2018 Posts: 16501 Location: Texas, USA
Posted: Thu Oct 16, 2025 18:55 Post subject: Re: Bug Found, Reproducible, Not a Show Stopper
msoengineer wrote:
MLandi wrote:
I found a bug. I've reproduced it three times. Clicking on the "Wireless" tab in the UI causes httpd to crash (I caught it in the logs, attached). Connecting to the router via PuTTY and issuing "restart httpd" restores the UI. Only the UI seemed to crash. All other functions seemed unaffected.
Sadly it still happens on nightly 62353 on the MR7500. I think BS may have fixed in in 62355, but will have to wait for that nightly to drop to see if his typo fixes fix the wireless tab crash.
kernel-panic69 wrote:
I saw the 62354 / 62355 commits about the same time I had responded to his email with links to the Broadcom and Atheros build threads that he had asked for while I was already in bed late last night / early this morning. So not sure if he had peeped the forum prior to those commits or not. I guess we'll see at some point
