Posted: Fri Sep 26, 2025 8:17 Post subject: New Build - 09/26/2025 - r62192
Welcome to x86 / x64 r62192 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r62192 std (09/26/25)
Kernel: Linux 6.12.48 #215 SMP Fri Sep 26 02:20:21 +07 2025 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, Automatic Drive Mount disabled - using own mount script for USB Disk, nfs to access USB3-ext4 SSD, Force reconnect 5:00 in the morning, using my own local NTP, CPU governour set to ondemand by script, Ignore WAN DNS, Recursive DNS Resolving (Unbound).
Reset: No
Status: Installed today, ERROR.
PPPoE does not start automatic. Status --> WAN states connected, but nothing happens. You have to click "disconnect" there in order to connect.
This behaviour started with two builds before previous release.
You can reboot the router and wait but rp-pppoe.so gets not loaded and pppd 2.4.8 isn't started before you click on disconnect.
Still no mention of fixing the Realtek 8125 issue. Since it is taking a while to get this issue fixed, I am thinking about trying Kong's new version of X86 64 bit OpenWRT. I tried the X86 version of OpenWRT for a while and liked it but the disc space for their generic version is very limited so there is no way to install many packages. There is a way to increase the disc space but I tried and failed at that because I am limited in may abilities when it comes to Linux. The Kong version is already much larger and has most of the packages I am interested in already built in. _________________ HP Z240 Workstation with i7-7700K, 32GB Ram, X710-T4L, R8125B four port, 2 single port RLTK 8127's & a AQC113 M2 slot card. Self compiled OpenWRT 25.12
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r62268) one used as a bridge
WRT54G-TM not in use
Posted: Sun Sep 28, 2025 11:59 Post subject: New Build - 09/26/2025 - r62192
Gigabyte Technology Co., Ltd. Z97X-Gaming 3 Intel(R) Core(TM) i7-5775C CPU @ 3.30GHz Linux 6.12.48 #215 SMP Fri Sep 26 02:20:21 +07 2025 x86_64 Wan connection type Automatic configuration-dhcp 32gb ddr3 Up and running for 24hrs plus seems like a good build no realtek just intel nics plus running qos hfsc + cake thanks again devs.
