Posted: Fri Aug 22, 2025 18:32 Post subject: New Build - 08/22/2025 - r62104
Welcome to x86 / x64 r62104 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r62104 std (08/22/25)
Kernel: Linux 6.12.43 #167 SMP Fri Aug 22 11:06:58 +07 2025 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, Automatic Drive Mount disabled - using own mount script for USB Disk, nfs to access USB3-ext4 SSD, Force reconnect 5:00 in the morning, using my own local NTP, CPU governour set to ondemand by script, Ignore WAN DNS, Recursive DNS Resolving (Unbound).
Reset: No
Status: ERROR.
PPPoE connection not automatic anymore.
Need to click on "connect" on Status --> WAN. Reboots do not fix this.
Will wait how it behaves during forced reconnect at 5 in the morning.
Looking through the timeline, unless I overlooked something, I still do not see where the Realtek 8125 issue has been addressed. I will wait until that issue is addressed before trying anything new. _________________ Optiplex 7060 with i7-8700, 32GB Ram, X710-T4L, i226 four port, & an AQC113 M2 slot card. DDWRT 63600 & Adguard Home.
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r62268) one used as a bridge
WRT54G-TM not in use
Looking at the tracking of what BS is working on, it looks like he may have just did something with the 8125 driver in the latest unpublished build, 62131. I will be trying the next one he publishes or what ever you call it when he releases one for us to try. _________________ Optiplex 7060 with i7-8700, 32GB Ram, X710-T4L, i226 four port, & an AQC113 M2 slot card. DDWRT 63600 & Adguard Home.
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r62268) one used as a bridge
WRT54G-TM not in use
Yeah this build isn't working with the 6 port card still. I hope that r62131+ fixed it. I don't see anything other than upstream changes for whatever that means.
