Joined: 04 Aug 2018 Posts: 1577 Location: Appalachian mountains, USA
Posted: Sun Jun 08, 2025 22:49 Post subject:
BTW, maybe the LED thing is fixed? Only one of my lan ports has anything in it just now (quiescent), and that one lights green, with the others blank. The wan port lights green as well, with lots of yellow flashing on the other side of the plug, I assume denoting data flow.
Kinda looks reasonable, no? _________________ On 61465: 3x Dynalink DL-WRX36, Linksys MX4200v2, 2x MR7350. WPA2personal/WPA3 w/ AES, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), Two SmartDNS/DoT providers and one DNSCrypt provider via VPNs. DNSmasq manages that plus ad blocking and local DNS.
Joined: 04 Aug 2018 Posts: 1577 Location: Appalachian mountains, USA
Posted: Mon Jun 09, 2025 20:11 Post subject:
Yet ANOTHER update re the Dynalink "The free memory is not enough" error: It occurred on a second Dynalink a couple of days ago AND on a Linksys MR7350 that I flashed this morning! It is not specific to the Dynalink! I'm not convinced that it's indicating anything that is actually wrong. It feels like it may be more of a warning, a clue that the flash is going to proceed a little differently. Anyone have a clue?
Also of note: The failure to start for wlan0 did NOT also happen (yet anyway) on the second Dynalink flashed, which has a somewhat simpler config. I'm thinking the heavy-duty config of the first Dynalink led to some sort of race condition in the boot timing that knocked the wifi startup off course somehow.
No good reason to think that, just engineering intuition. You know how we are... an "explanation" for everything, whether or not correct. _________________ On 61465: 3x Dynalink DL-WRX36, Linksys MX4200v2, 2x MR7350. WPA2personal/WPA3 w/ AES, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), Two SmartDNS/DoT providers and one DNSCrypt provider via VPNs. DNSmasq manages that plus ad blocking and local DNS.
Joined: 04 Aug 2018 Posts: 1577 Location: Appalachian mountains, USA
Posted: Fri Jun 13, 2025 17:28 Post subject:
Another other update: same CLI-method "error" message about a shortage of memory appeared in a flash yesterday of a Linksys MX4200v2, so there are three router models now that have shown that phenom. Clearly not a peculiar and fearsome Dynalink thing at all! _________________ On 61465: 3x Dynalink DL-WRX36, Linksys MX4200v2, 2x MR7350. WPA2personal/WPA3 w/ AES, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), Two SmartDNS/DoT providers and one DNSCrypt provider via VPNs. DNSmasq manages that plus ad blocking and local DNS.
