[blkt]

Welcome to Broadcom r61264 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r61238 (mirror)

• OpenVPN 2.6.14: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269 r60276 r60467 r60511 r60523 r60586 r60621 r60652 r60662
r60697 r60717 r60742 r60771 r60791 r60832 r60942 r61025 r61202 r61238 r61264

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r61264) / Linux 4.4.302-rt232-st63 #13703 SMP Tue May 13 04:48:37 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r61025 std (05/06/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[KACTET]

Router/Version: Asus RT-AC88U
Update method: WebUpgrade
File/Kernel: asus_rt-ac88u-firmware.trx_rr61264 std / Linux 4.4.302-rt232-st63 #13708 SMP Wed May 14 04:54:35 +07 2025 armv7l
Previous/Reset: 61238 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 6:02 hours
CPU Temperature: CPU 70.2 °C / WL0 46.3 °C / WL1 47.3°C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r61264 std (05/14/25)
Kernel Version Linux 4.4.302-rt232-st63 #13703 SMP Tue May 13 04:48:37 +07 2025 armv7l

update: CLI 60742 > 61264
reset: NO
status: operational 1h
errors: nothing i could find so, far... there is no DSA on this unit so, vlans are good old swconfig and using GUI...

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-61264_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st63 #38384 Wed May 14 05:33:49 +07 2025 mips
Previous/Reset: 61238 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 4:29 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[rnix]

Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r61264 std (05/14/25)
Kernel: Linux 4.4.302-rt232-st63 #13707 Wed May 14 04:48:32 +07 2025 armv7l
Mode: gateway
Previous: r60586
Reset: no
Status: ok
Issues/Errors: n/a

Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r61264 std (05/14/25)
Kernel: Linux 4.4.302-rt232-st63 #13703 SMP Tue May 13 04:48:37 +07 2025 armv7l
Mode: gateway
Previous: r60586
Reset: yes
Status: ok
Issues/Errors: n/a

Why Bandwidth graps were changed?
Those are much harder to read unless you zoom in a lot.
I think previous version had much better readability.

[ddwrt.guy]

Router/Version: R7000
Firmware: DD-WRT v3.0-r61264 std (05/14/25)
Kernel: Linux 4.4.302-rt232-st63 #13703 SMP Tue May 13 04:48:37 +07 2025 armv7l
Mode: gateway
Previous: n/a
Reset: yes
Status: ok
Issues/Errors:

I loaded my config manually using the GUI. All seems to be working ok, except ..

I have an untrusted subnet with iot devices running on subnet 172.47.20.0/24 on br1.
My trusted subnet is 10.47.67.0/24 on br0.
I had issues getting access to br1 hosts from br0.
For testing, I had iptables forward br0->br1 and br1->br0 accept. I also had a nat postrouting MASQUERADE. This used to work.

After seeing no reason for this not to work, I changed the subnet 172.47.20.0/24 to 10.10.20.0/24, and it all worked fine.

Why did that change make this work?

[ho1Aetoo]

may be because "172.47.20.0/24" is not a private IP address?

[baboeska]

Router/Version: EA6900 (XAC1900 modded well)
File/Kernel:
Previous/Reset: No reset
Mode/Status: 2.4ghz wifi ap x 3
Issues/Errors: Web interface spontaneously died after a few hours.