Posted: Thu Apr 10, 2025 5:53 Post subject: New Build - 04/10/2025 - r60662
Welcome to x86 / x64 r60662 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 27 Oct 2009 Posts: 81 Location: Oxford County,Ontario
Posted: Thu Apr 10, 2025 23:24 Post subject: no Windows update or services
For the last 4 builds I cannot access windows update the store will not download anything and my phone link will not connect, Its definitely connected to DD-WRT. so this morning I got fed up and started doing some troubleshooting. if I connect the computers 1 by 1 direct to the modem, Windows update works and store downloads no way to check myphone link with no WIFI. With the last computer I tethered my phone to it and it worked as well any ideas? I did not do a reset this time but, have reimaged the drive and did a reset same result
Hardware:
MB Supermicro X9SCL/X9SCM
CPU Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz
8 GIGs of ram and ten Intel nics (2xQuad 2 onboard)
Windows store works for me on this build. Also windows update works for me.
I do remember having to reset the entire DD-WRT system by running nvram erase command at the middle of March cause of something similar happened with me. Then everything worked normally once I reconfigured it. Kinda weird since I didn't have to reset the config for quite some time.
I have been running this one for the last two days without any issues. I upgraded from 60621 without resetting. _________________ X86_64 build PC w/ i7-6700 & 16 GB RAM (DDWRT Build r60662)
2 R7800's (DDWRT Build r60586) I use one as an AP and the other is a spare
GL.iNET GL-MT6000 Flnt 2 with OpenWRT as an AP
3 R7000's (DDWRT build r53843) not in use
Netgear DGND 3700 (with OpenWRT) not in use
WRT54G-TM not in use
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r60662 std (04/10/25)
Kernel: Linux 6.6.86-rt29 #146 SMP Thu Apr 10 07:55:53 +07 2025 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, samba/nfs to access USB3-ext4 SSD, mounted by script, Force reconnect 5:00 in the morning, using my own local NTP, CPU governor set to on demand by startup script. Ignore WAN DNS, Recursive DNS Resolving (Unbound).
Reset: No
Status: Installed at release. Nothing to report, everything fine.
