[blkt]

Welcome to Marvell r60269 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r60217 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582 r59661 r59765 r59820
r59887 r59964 r60090 r60098 r60121 r60137 r60217 r60269

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[saphirely]

Linksys WRT1900ACS
Firmware DD-WRT v3.0-r60269 std (03/12/25)
Kernel Linux 6.1.130-rt28 #1026 SMP Wed Mar 12 09:51:40 +07 2025 armv7l

Upgraded by CUI.
Wan IP :Yes
DNS: no works until removed all 5 undefined items under Security->Firewall->Block WAN Requests.
(I did not measure which undefined is the key caused the dns refused ONE BY ONE)
Thank BS!

[WENED]

Same problem as previous version. WAN appears to be connected but no internet.
Reverted to 60137

[saphirely]

all 5 undefined items, later displayed as:
Detect and Block Port Scanners
Slowdown connection attempts (Tarpit)
Filter TCP-SYN floods
Filter UDP floods
Filter Ping Echo request floods

[saphirely]

I chose all except "Filter UDP floods" , DNS works.

I wonder whether I also filer UDP floods, my DoQ works or not. Perhaps later will test.

[saphirely]

@WENED

Please verify your Securite->Firewall->Block WAN requests.
If you ignore something of below:
1.Detect and Block Port Scanners
2.Slowdown connection attempts (Tarpit)
3.Filter TCP-SYN floods
4.Filter UDP floods
5.Filter Ping Echo request floods

For me, I keep 1,2,3,5 and it works.

[WENED]

saphirely

Thank you this worked.

It seems there was a major change here and should be posted so everyone is aware. I would not have noticed it as I don't check for changes such as this.

[kernel-panic69]

This is a prime example where brevity and strict adherence to one's own swim lane results in a gotcha. Thanks for the feedback,
but I doubt there will be any kind of remedy of the situation that isn't a complete train wreck.

[Monza]

[kernel-panic69]

[saphirely]

I added Filter UDP floods: 50 for testing,
DoQ(dnsproxy pure not https3 works) and M$ Teams worked but displayed connection trouble.

So change "Filter UDP floods: 64" try again.
It works without displaying connection trouble.

If you need to co-operate with M$ Teams, I am glad to share with you.

[marcus83]

Router/Version: WRT3200ACM
File/Kernel: Linux 6.1.130-rt28 #998 SMP Sat Mar 8 05:34:44 +07 2025 armv7l
Previous/Reset: 03-08-2025-r60269
Mode/Status: AP
Issues/Errors: AP still unstable, loses the connection, I returned to the r60137

[Monza]

r60269 has been working for me after above firewall changes. Would occasionally drop WiFi connections but reboot would bring everything back up. It seemed slow when browsing taking time to open new links but worked well otherwise. Releases after r60269 have had issues for me so I've remained on r60269 since release. No problems logging into any sites.

Still . . Proton OpenVPN setup would not connect nor would Amazon tablets/readers. Yesterday could not log in at my bank. Later Roku's lost connection. Switched out to my backup router and still had the same issues. Trouble shooting I found that after disabling ProtonVPN Wireguard I could log in. Considered the possibility it was entirely ProtonVPN's issue?? Not being able to use ProtonVPN's OpenVPN connection OR their Wireguard setup would leave me with no working VPN client???

Out of frustration I reverted to r55630. ProtonVPN OpenVPN setup connected and all WiFi devices connected. Version is stable for the past 14 hrs and no connections loss. Not sure what has happened since r55630 but it's the last release, for me, where everything works as expected. I'm going to run it for a couple of days hoping there are no security loss. Seems I spend a lot of time nowadays just trying to get firmware updates to work??

Expecting delivery of new ASUS router Monday so I'll see how that goes.

Edit: Received and setup router. VERY pleased so far. All wifi devices connect. ProtonVPN OpenVPN and WireGuard both work. Has ASUSWRT firmware so may be a future DD-WRT device. Setup seems sorta, kinda familiar but takes some getting used to. VPN Fusion is where you install clients. Disabled wifi 6 for now as I have no supporting devices.

https://www.asus.com/us/networking-iot-servers/wifi-7/all-series/asus-rt-be92u/techspec/

Had initial issue setting which devices used the vpn. Found post below which set me straight and had immediate success. My understanding was flawed. See question #2 at the very bottom of this link. https://rog-forum.asus.com/t5/faqs-networking/wireless-router-how-to-set-up-a-openvpn-client-in-vpn-fusion/ta-p/1087455

My MB8611 modem now has all connections blue since being connected to the RT-BE92U router (also replaced all cables with CAT-8's). Best wired/wifi speeds I've ever had. Tip, use the "Quick Internet Setup" button rather than the "Manual Setup" button (it seems I'm not THAT smart). After quick setup THEN start making changes. Only negative so far was Trend Micro's free AiProtection . . must consent to data collection to use so I left that off. Unlike my returned router . . this one supports VPN Servers AND Clients out of the box (at no charge). Hoping for future DD-WRT firmware :)

I've been so isolated with Linksys that I'm just finding out there is another firmware available for ASUS called Merlin. They have a release for the RT-BE92U but it is considered unstable for now. Probably give it a try when stable.

Link to supported routers - https://sourceforge.net/projects/asuswrt-merlin/files/

More than you want to know about the two firmware's. https://dongknows.com/asuswrt-merlin-firmware/

Hoping the Merlin files may accelerate the DD-WRT support???