[blkt]

Welcome to Broadcom r59582 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build r59468 (mirror)

• OpenVPN 2.6.12: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips, scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips, scripts. Thanks BS egc & eibgrad!

Notes: ...
r58892 r58950 r58976 r59045 r59093 r59171 r59302 r59346 r59369 r59397 r59429 r59468 r59582

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[thommy181]

Router: Linksys EA6400
Kernel: Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l
Previous: r59468 standard build
Mode: Internet gateway, WIFI 5GHz AP (AC mode), Smartdns, iptables firewall, SSHd
Issues: small issues with Smartdns, generally device is operating good.
Uptime: 6h

In previously build I'm ran Smartdns as main dns service. Dnsmasq is permanently disabled now. Generally this service is operating correctly with small isues. I will create topic on board about Smartdns service problems on this device soon. In general device is working good.

[KACTET]

Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r59582 std / Linux 4.4.302-rt232-st60 #13001 SMP Sun Feb 9 04:42:58 +07 2025 armv7l
Previous/Reset: r59468 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 2:36 hours
CPU Temperature: CPU 60.0 °C / WL0 40.0 °C / WL1 0.0 °C (ambient temperature 19.0 °C)
Issues/Errors: no

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."

If your router's light turns red, don't worry. Internet connection is ok.

Thank you BS and gurus!

[Alozaros]

Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r59582 std (02/09/25)
Kernel Version Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l

update: CLI r59486> r59582
reset: NO
mode: Gateway/DNScrypt-proxy v2 via Entware, AD-Block (via DNSmasq script and DNScrypt),IPset Firewall,Forced DNS,AP&Net Isolation,x3VLAN,VPN client(PBR),40 HT 2.4Ghz only, Disable 121
status: Operational 6h+
errors: just found that Legacy Rates (11b) cannot be disabled via GUI... if i click on disabled, than save it does nothing...however i could disable it via CLI -- nvram set wl0_legacy=0

Thanks BS and Team !

[tli]

Router/Version: Asus RT-AC56U
File: asus_rt-ac56u-firmware [02-09-2025-r59582].trx
Kernel: Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l
Previous: asus_rt-ac56u-firmware [02-02-2025-r59468].trx
Reset: No
Mode: Gateway Router (with WiFi disabled; 2 OEM WAPs connected via LAN)
Status: All gateway functions seem to be working for my setup.
Uptime: >8 hours


Router/Version: Asus RT-N66R
File: dd-wrt.v24-59582_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.302-rt232-st60 #35674 Sun Feb 9 05:10:00 +07 2025 mips
Previous: dd-wrt.v24-59045_NEWD-2_K3.x-big-RT-N66U.trx
Reset: No
Mode: Gateway Router (with WiFi disabled; 2 OEM WAPs connected via LAN)
Status: All gateway functions seem to be working for my setup.
Uptime: >8 hours

[KACTET]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-59582_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st60 #35674 Sun Feb 9 05:10:00 +07 2025 mips
Previous/Reset: 59468 / no
Mode/Status: Gateway, Open VPN Client / Up and running for 2:58 hours
CPU Temperature: WL0 46.0 °C (ambient temperature 20.0 °C)
Issues/Errors: Nothing significant

Thank you BS and gurus!

[Ger482]

Router Model:Asus RT-AC68U
DD-WRT v3.0-r59093 std (01/10/25)
Kernel Version -Linux 4.4.302-rt232-st60 #12823 SMP Fri Jan 10 04:39:34 +07 2025 armv7l
downgraded from: r59582
Reset: yes
Status:constant reboots .
running Wireguard
Errors: reboots multiple times a day ..reverted back to r59093 after trying several new firmware's with the same issue and reverting back to r59093 each time solves the problem?

Thank-You! to everyone involved

reinstalled latest r59582 after reset to factory. up for 5 hours without a shutdown so far all good

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r59582) / Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l
Previous/Reset: DD-WRT v3.0-r59468 std (02/02/25) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + high-speed USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[tedm]

Router/Version: Netgear WNDR4000
File/Kernel: Linux 4.4.302-rt232-st60 #35678 Sun Feb 9 05:15:27 +07 2025 mips
Previous/Reset: No
Mode/Status: OK
Issues/Errors: None

Remotely updated seems OK

[tedm]

Router/Version: TP-Link Archer C9 v1
File/Kernel: Linux 4.4.302-rt232-st60 #12995 SMP Sun Feb 9 04:12:03 +07 2025 armv7l
Previous/Reset: No
Mode/Status: OK
Issues/Errors: None

Seems OK using wifi on it now. Uptime 4 hrs

[lost+found]

Router/Version: Linksys E2000
File/Kernel: dd-wrt.v24-59582_NEWD-2_K3.x_mega-e2000.bin / Linux dd-wrt 4.4.302-rt232-st60 #35678 Sun Feb 9 05:15:27 +07 2025 mips DD-WRT)
Previous/Reset: dd-wrt.v24-58283_NEWD-2_K3.x_mega-e2000.bin (30/30/30 resets before and after upgrade)
Mode/Status: EmErGeNcY gateway, Dnsmasq client/server config, NATv4 + "NATv6"
Issues/Errors: no

The mac cloning bug in recent mips versions did vanish.

Thank you superstars!

[rnix]

Router/Version: Asus RT-N18U
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
Kernel: Linux 4.4.302-rt232-st60 #12997 Sun Feb 9 04:18:49 +07 2025 armv7l
Mode: gateway
Previous: r59468
Reset: no
Status: ok
Issues/Errors: none observed

Router/Version: Asus RT-AC66U B1 (running RT-AC68U build)
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
Kernel: Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l
Mode: gateway
Previous: r59468
Reset: no
Status: ok
Issues/Errors: none observed

Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r59582 std (02/09/25)
Kernel: Linux 4.4.302-rt232-st60 #12993 SMP Thu Feb 6 11:03:59 +07 2025 armv7l
Mode: gateway
Previous: r59468
Reset: no
Status: ok
Issues/Errors: none observed

[xenador77]

Router/Version: DIR-890L
File: dir890-webflash.bin (r59582)
Kernel: Linux 4.4.302-rt232-st60 #12998 SMP Sun Feb 9 04:26:07 +07 2025 armv7l
Previous/Reset: v3.0-r58730 / No
Mode: Gateway, WIFI (5GHz/2.4GHz), DNSmasq
Issues/Errors: None
Status: OK

Thank you!

[Harb1]

Netgear r7000 Up and running for almost 3 days seems like a good build thanks again devs.

[Vercety]

Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: Linux 4.4.302-rt232-st60 #35658 Sun Feb 9 04:48:54 +07 2025 mips
Previous/Reset: no reset,work good
Mode/Status: AP/up 1day, 14hours
CPU Temperature: WL045.6 °C WL146.5 °
Issues/Errors: no errors
Samba:Work well