Posted: Mon Nov 11, 2024 15:03 Post subject: New Build - 11/11/2024 - r58662
Welcome to MediaTek r58662 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Was on the 11-03-2024-r58627 build and Flashed the 11-11-2024-r58662 build and router was stuck in reboot loop afterwards. Was able to recover with nmrpflash back to stock firmware and to ensure i didnt mess something up like trying the wrong file redownloaded and re-tried the 11-11-2024-r58662/netgear-r6900v2/factory-to-ddwrt.img file and same effect. Recovered Stock again and re flashed back to 11-03-2024-r58627 (factory-to-ddwrt) and router came up and still had my configuration intact did the 11-03-2024-r58627 webflash file and had it reset just to be safe.
Interestingly have a r6900 (r7000) that i setup with the 11-11-2024-r58662 build from stock (after taking ages trying to get the telnet command working so the r7000 file would flash) and it went just fine which is why i attempted to update the r6900v2 but with less success.
Posted: Thu Nov 14, 2024 18:24 Post subject: Netgear R6350
Router: Netgear R6350
File: r6350-webflash.bin
Reset: No
Previous: 11-03-2024-r58627
Error: Reboot Loop after Flash, download is approx. half the size of the previous build. Recovered with nmrpflash. Can't get serial logs, it is in a commercial setting. Same problem with the build after this one, r58689. _________________ Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.
QCA Best WiFi Settings
Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one.
Atheros:
Netgear R7800 x5 - WDS AP / station, gateway, QoS
TP-Link Archer C7 v2 x2 - WDS Station
D-Link 615 C1/E3/I1 x 7 - 1 WDS station
D-Link 825 B1 - Not used
D-Link 859 - WDS Station
D-Link 862L A1 x2 - WDS Station
UBNT 5AC loco x2 - airOS
UBNT loco M2 x2 - airOS
Broadcom
Linksys EA6400 - Gateway, QoS
Asus N66U - AP
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - switch
Netgear R6350 - not used
