Posted: Tue Oct 15, 2024 15:02 Post subject: New Build - 10/15/2024 - r58568
Welcome to x86 / x64 r58568 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Wed Oct 16, 2024 3:09 Post subject: Works OK!
Router/Version: Gigabyte 4770k 16GB ram
File/Kernel: Full VGA 64x upgrade
Previous/Reset: No
Mode/Status: AP/Gateway/NAS
Issues/Errors: Seems to be working just fine for me.
System - Dell OptiPlex 5050 with core i7 6700 & 16 GB Ram
Version - Full VGA 2 GB version (with license)
Previous Version - 58389
No issues so far after about 16 hours. _________________ HP Z240 SFF Workstation with I7-7700K, 32GB Ram, X540 two port, R8125B four port, AQC113 M2 slot, and two R8127 single port cards. Self compiled OpenWRT 24.10.4
GL.iNET GL-BE9300 Flint 3 with OpenWRT as an AP
GL.iNET GL-MT6000 Flint 2 with OpenWRT as an AP
GL INET GL-BE3600 Slate 7 Travel Router with OpenWRT as a travel router
2 R7800's (DDWRT Build r60586) Not in use
3 R7000's (DDWRT build r62268) one used as a bridge
WRT54G-TM not in use
Router/Version: industrial PC N4000 4GB RAM, 2*intel i226-v
File: dd-wrt_x64-webupgrade_full_vga_2GB.bin
Firmware: DD-WRT v3.0-r58568 std (10/15/24)
Kernel: Linux 6.6.56-rt29 #420 SMP Tue Oct 15 03:54:46 +07 2024 x86_64
Mode: Gateway, SFE disabled, Wireguard for external access, WAN (PPPoE/VLAN7) to GPON Modem, samba/nfs to access USB3-ext4 SSD, Force reconnect 5:00 in the morning, using my own local NTP
Reset: No
Status: Installed at release.
Syslog timestamp is minus two hours off (on all DD-WRT devices of mine.). Time in upper right corner is ok.
USB Disks are not mounted at boot / restart. Enabling / disabling of Core USB Support, USB Storage Support or Automatic Drive Mount does not fix this, also rebooting does not fix this. Have to disconnect the USB cable by hand and reconnect it, otherwhise sda is not shown in Webif, resulting in Samba and NFS shares to be not available.
After reconnection by hand everything comes online and disk is shown in Webif.
CPU is set to maxclock all the time, changed it to ondemand by console.
