How to make ISP based IPTV boxes work and not bork my net?

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
teskilatimahsusa87
DD-WRT Novice


Joined: 04 Oct 2023
Posts: 42

PostPosted: Wed Oct 09, 2024 20:28    Post subject: How to make ISP based IPTV boxes work and not bork my net? Reply with quote
Look guys this is very important. I used freshtomato, openwrt before, they better or worse but a working IPTV config, and not too hard to do so. Unlike dd wrt. You tell me read this wiki or what but then I go that wiki, it says enable this from this page, I go there, there is nothing written like they say. Please help. Why would I use dd wrt if can't even configure IPTV? This is too important for us.

I am using Archer C9 v3.0 on dd-wrt. Sometimes it so happens that, wifi and IPTV borks at the same time. They stop working. I don't know why. I checked the wiki, it says disable multicast in security tab, but thing they say is not what it writes there. In Security tab it says "Multicast Communication" under Block Wan Requests. Which is ticked for me. Do I untick it or what?

Also they say something in Wireless section, "optimize multicast traffic" tick this they say, no such thing there.

And also it says change wifi bridge to another like 192.168.x.1 why the hell would I do that? That's probably not neccessary. How do I access my computer from my phone then?

Here is the setup for my IPTV; this works most of the time. Unless sometimes it borks:



Ekran görüntüsü_2024-10-09_23-18-13.png
 Description:
 Filesize:  36.24 KB
 Viewed:  513 Time(s)

Ekran görüntüsü_2024-10-09_23-18-13.png


Sponsor
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3380
Location: Germany

PostPosted: Thu Oct 17, 2024 18:11    Post subject: Reply with quote
The IP-TV VLAN is completely isolated.
It is only forwarded from the WAN port to port 1 within the switch.

No traffic from VLAN55 somehow reaches the router.

Your problems cannot have anything to do with WLAN and whatever else.

_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6968
Location: Romerike, Norway

PostPosted: Fri Oct 18, 2024 7:35    Post subject: Reply with quote
As the CPU port is not included in vlan55, the Multicast Deamon will not see it.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum