Posted: Thu Aug 22, 2024 11:23 Post subject: WTB: Router w/10 Gpbs Copper WAN port
Hello,
I'm here to find a new routeur following an update of my internet box =)
I'm now able to download at 10Gpbs and I research a routeur with 10G Copper WAN port and 10G Copper or fiber LAN port (LAN port is just for switch) OR a multiple 10G port on routeur (4 mini)
Compatible with Wifi 6/7 and (of course) DD-WRT, Wiregard etc, etc
I actually have a Netgear R7000
Regards
(Réponse en Francais accepté)
Modérateur edit: Le sujet a été modifié pour respecter les directives du forum. -kp69
should be very limited with an N100
The processor provides a maximum of 9x PCIe 3.0 lanes with a maximum throughput of ~8.9GB/sec
However, some of these lanes are already required for other things such as NVME or SATA and other components / network ports.
I just spent few min web search..
Im not experienced with any of those, performance capabilities.. _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 58730 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 58694 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 58785 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 58689 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 58785
Broadcom
Netgear R7000 --DD-WRT 58627 Gateway/SmartDNS/DoT,AD-Block,IPsetFirewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
as this is TP-Link it will run TP-link software more likely...and its not a PC either...
So, for running DDWRT on it, donation would be necessary than it may not get over the moon that quick...if support happens at all... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 58730 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 58694 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 58785 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 58689 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 58785
Broadcom
Netgear R7000 --DD-WRT 58627 Gateway/SmartDNS/DoT,AD-Block,IPsetFirewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Because one was already donated (actually probably two) before you came to the party, most likely. The TP-Link BE800 is a currently unsupported Qualcomm IPQ SoC. Donation required for the developer to port it. Probably easiest to see if it is available via Amazon.de to alleviate any customs issues.
https://wikidevi.wi-cat.ru/TP-LINK_Archer_BE800 _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Joined: 16 Nov 2015 Posts: 6701 Location: UK, London, just across the river..
Posted: Mon Aug 26, 2024 6:45 Post subject:
brutaldeath wrote:
Thanks all for your reply
So if I resume
No Wifi 7 devices are currently supported
No 10Gb standard routeur with 10G port can route 10Gpbs
Make donation !!
Exact ?
Yep, no WIFI 7 support so far...DDWRT is currently on WIFI 6 W.I.P. and the opensource wifi binaries are still on WIFI 5 or WIFI 6 standards...no idea how quick WIFI 7 will come across, it may take years...same for WIFI 7 clients implementation...pretty much the same is for 10Gbit/s pipe, although its coming quickly, its not very common as well clients side must be able to handle it and hardware must be capable of too...CPU, ram, pipes and ect.
As far as donation is required...as the other members 've said, the main and only developer Brain Slayer (BS) must have his hands on it, in order to understand the architecture and be able to port it, not to mention that, porting must be bound with existing open source binaries and other hacks...so, even a quick donation may not match you expectations...so, no rush and better get in connection and discuss the donation before rush it... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 58730 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 58694 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 58785 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 58689 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 58785
Broadcom
Netgear R7000 --DD-WRT 58627 Gateway/SmartDNS/DoT,AD-Block,IPsetFirewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913