Sp1derman DD-WRT User
Joined: 16 Jun 2006 Posts: 224 Location: Germany, BW
|
Posted: Wed Jul 17, 2024 12:45 Post subject: OpenVPN MTU-value is wrong on VPN-Server br0 and on tap1/2 |
|
2x X64, 2 x build 55615, OVPN Bridge, OVPN version 2.6.10
I had to adjust the VPN-Tunnel MTU to 1420 as I suddenly got fragment Errors (EMSGSIZE...)
I noticed that on Client side br0 and tap1 got the same MTU value as Tunnel-MTU, but on server side br0 and tap2 are still at MTU 1500.
I change the values on server by hand, but after rebooting server br0 was still at MTU 1420 but tap2 was back to 1500. So I then changed back br0 to 1500.
I'm wondering if this the correct behaviour on server side, but I assume br0 and tap on server also should get the Tunnel-MTU value.
Any ideas?
EDIT:
After doing some more research I'm pretty sure.
On VPN-Server the MTU of br0 and the tun/tap device has to have the value of the tunnel-MTU.
This might cause some more trouble with the never ending VPN-MTU issue. |
|