I installed the firmware dd wrt. I set up the Internet via PPOE and it works. I want to make IPTV from the provider connected from the router to the TV work the same way. I need an igmp proxy button to enable. Everything works in the official firmware, this function is immediately enabled, but in DD VRT I can’t get iptv wink to work.
After setting up the Internet on the firmware, a message pops up on the iptv set-top box when the channel is turned on Error code 2-9-1 Rostelecom: Multicast unavailable
I want this firmware because of stable wifi. But for this you need to get iptv to work on your TV.
Joined: 16 Nov 2015 Posts: 6785 Location: UK, London, just across the river..
Posted: Fri Jul 12, 2024 13:37 Post subject:
"I installed the firmware dd wrt".... the last firmware is 57200 which one did you install ?
on the wifi section there is a multicast button as well on the switch config and networking sections too... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 58184 WAP
TP-Link WR1043NDv2 -DD-WRT 59369 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 59369 Gateway/DoT,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 59582 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 59582 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Dynalink DL-WRX36-DDWRT 59582
Broadcom
Netgear R7000 --DD-WRT 59582 Gateway/DNScrypt-proxy2/AD-Block,IPset Firewall,Forced DNS,x4VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
We have no idea what your applicable DD-WRT build version is, nor what your router's applicable configurations are, and finding information on Rostelecom's website seems to be a lost cause. Please provide all applicable amplifying information. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
"I installed the firmware dd wrt".... the last firmware is 57200 which one did you install ?
on the wifi section there is a multicast button as well on the switch config and networking sections too...
computers and iptv set-top boxes are connected by wires to the lan connector of the router, and are not distributed via wifi
No. I installed version 3.0 beta 44715. Although I found version r57200 from the link. But I had no idea whether it was possible to install it. After all, there should be the latest version on the site in the search, and is it possible to put this latest 57200? By the way, I didn’t find a rollback file to the stock firmware in 57200 in case something went wrong. Is it possible to use webrevert firmware from another assembly after updating to a more recent firmware version?
We have no idea what your applicable DD-WRT build version is, nor what your router's applicable configurations are, and finding information on Rostelecom's website seems to be a lost cause. Please provide all applicable amplifying information.
Version ddvrt v3.0 [Beta] Build: 44715.
From everything that Google search returned, I included the UPnP Service
Disabled the functions of Blocking anonymous requests from the WAN (ping)
- Multicast stream filter
- WAN NAT redirection filter
But I heard something that in the latest build 57200 igmp proxy is easily enabled.
And so I set up the Internet via ppoe, login and password, enabled and disabled a couple of functions and did not configure anything else. In ppoe dual I saw igmp enabled, but then the Internet stops working. Perhaps something has changed in the latest firmware version.
I will be glad to help you in any way, because I really want this firmware; it just has stable wifi and catches it throughout the house, which is not in the standard firmware.
You are not giving us information on any IPTV requirements from your ISP, so therefore we can't just magically help you. Also, by default, multicast is blocked via DD-WRT firewall.
You are not giving us information on any IPTV requirements from your ISP, so therefore we can't just magically help you. Also, by default, multicast is blocked via DD-WRT firewall.
Set-top box SML 482. All that is needed for it to work as in the official firmware of the router is to enable IGMP Proxy, igmp snooping and multicast via ppoe. I also see that in the new official firmware you need to enable the Bridge mode and select the lan input on which the set-top box will be output. Or what requirements for IPTV from the provider do you mean. Well, if the set-top box now works through the wink service.
And I’m also just interested in the new firmware dd wrt there is no rollback file to the factory firmware. If I use a rollback file from an older version of firmware 44715, when the new firmware is 57538, will it be normal to roll back to the factory firmware? And then suddenly it won’t be possible to set up iptv again over the wire in the new firmware. I installed an earlier firmware, no matter how hard I tried it didn’t work. Like some kind of setting about iptv was in ppoe dual, but then the Internet and especially iptv did not work. And iptv works using the udp protocol
You are not giving us information on any IPTV requirements from your ISP, so therefore we can't just magically help you. Also, by default, multicast is blocked via DD-WRT firewall.
Set-top box SML 482. All that is needed for it to work as in the official firmware of the router is to enable IGMP Proxy, igmp snooping and multicast via ppoe. I also see that in the new official firmware you need to enable the Bridge mode and select the lan input on which the set-top box will be output. Or what requirements for IPTV from the provider do you mean. Well, if the set-top box now works through the wink service.
And I’m also just interested in the new firmware dd wrt there is no rollback file to the factory firmware. If I use a rollback file from an older version of firmware 44715, when the new firmware is 57538, will it be normal to roll back to the factory firmware? And then suddenly it won’t be possible to set up iptv again over the wire in the new firmware. I installed an earlier firmware, no matter how hard I tried it didn’t work. Like some kind of setting about iptv was in ppoe dual, but then the Internet and especially iptv did not work. And iptv works using the udp protocol
So, without setting anything up, I returned to the original firmware after 4 devices were connected via cable and 5 via WiFi at once, and the speed on this firmware dropped to the point that the pictures barely loaded.
