Joined: 08 May 2018 Posts: 16219 Location: Texas, USA
Posted: Wed Jun 19, 2024 13:10 Post subject: New Build - 06/19/2024 - r56941
Welcome to Broadcom r56941 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_56941 std / Linux 4.4.302-rt232-st52 #11777 SMP Wed Jun 19 05:36:42 +07 2024 armv7l
Previous/Reset: r56820 / no
Mode/Status: Gateway / Up and running for 10:35 hours
CPU Temperature: CPU 79.1 °C / WL0 46.5 °C / WL1 0.0 °C (ambient temperature 22.0 °C)
Issues/Errors: no
As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel.
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot."
The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
1. CPU temperature is not displayed correctly.
CPU temperature readings started changing after one second from 78.0 - 79.1 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 61954
Broadcom
Asus RT-AC88U - DD-WRT 61954
Asus RT-AC87U R - DD-WRT 61954
Asus RT-N66U - DD-WRT 61954
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: TP-Link Archer C9 v1
File/Kernel: DD-WRT v3.0-r56941 std (06/18/24) / Linux 4.4.302-rt232-st52 #11771 SMP Wed Jun 19 05:06:44 +07 2024 armv7l
Mode: Gateway+AP, CTF+FA, DNSMasq DHCP v4 & v6 SLAAC+RA, SmartDNS, SMB, DDNS
Previous/Reset: 54820 / No reset, WebUI
Status: Crashing
Issues/Errors: Crashes at variable intervals, ~10-20 hrs between crashes so far. Crashes seem to have no correlation to network activity.
Unsure if SmartDNS plays any role - with some prior builds, disabling SmartDNS seemed to fix crashes & uptimes of multiple weeks were possible, and reenabling SmartDNS caused crashes to recur.
Otherwise, build seems to function when not crashing.
Crashes at variable intervals, ~10-20 hrs between crashes so far. Crashes seem to have no correlation to network activity.
Unsure if SmartDNS plays any role - with some prior builds, disabling SmartDNS seemed to fix crashes & uptimes of multiple weeks were possible, and reenabling SmartDNS caused crashes to recur.
I am still getting crashes on ASUS RT-3100 using the 3100 binary after 1-3 minutes of uptime. I do not have SmartDNS enabled (I do not have the router provide any DNS or DHCP). I do have a Wireguard VPN, am using CTF (FA not available), and have Wifi connections on both 2 and 5 GHz. This appears to have begun when threading was introduced and I have been reverting back to 56182.
Router/Version: Asus RT-N66U
Update method: WebUpgrade
File/Kernel: dd-wrt.v24-r56941_NEWD-2_K3.x-big-RT-N66U.trx / Linux 4.4.302-rt232-st52 #31144 Wed Jun 19 06:22:47 +07 2024 mips
Previous/Reset: r56667 [PULLED] / no
Mode/Status: Gateway / Up and running for 12:01 hours
CPU Temperature: WL0 46.5 °C (ambient temperature 18.6 °C)
Issues/Errors: Nothing significant
CPU temperature readings started changing after one second from 46.0 - 46.5 °C
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 59468
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 61954
Broadcom
Asus RT-AC88U - DD-WRT 61954
Asus RT-AC87U R - DD-WRT 61954
Asus RT-N66U - DD-WRT 61954
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
