Setup tivibu IPTV(which uses VLAN ID 55) how?

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
teskilatimahsusa87
DD-WRT Novice


Joined: 04 Oct 2023
Posts: 42

PostPosted: Sun Jun 09, 2024 15:36    Post subject: Reply with quote
Since anyone was wondering, I solved this problem myself. This community is very similar to archlinux community. "Go do it yourself" "Read the manual" blah blah. I look at the manual, and it's from 2018 haha rofl Laughing Okay here is what worked for me. This would work for any ISP-based IPTV's:


dd wrt tivibu çalışan config archer c8.png
 Description:
 Filesize:  61.39 KB
 Viewed:  534 Time(s)

dd wrt tivibu çalışan config archer c8.png


Sponsor
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3457
Location: Germany

PostPosted: Sun Jun 09, 2024 16:41    Post subject: Reply with quote
This is the same configuration as in the other post where you said it wouldn't work?

So how did you solve the problem? by plugging the cable into the right socket?

Laughing

Maybe it is your own job to check that the cable is connected to the correct port.

We do not have physical access to your router and cables over the internet.

_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 2074

PostPosted: Sun Jun 09, 2024 18:37    Post subject: Reply with quote
teskilatimahsusa87 wrote:
Since anyone was wondering, I solved this problem myself. This community is very similar to archlinux community. "Go do it yourself" "Read the manual" blah blah. I look at the manual, and it's from 2018 haha rofl Laughing Okay here is what worked for me. This would work for any ISP-based IPTV's:

What "manual" did you read? Pretty sure the other threads linked to this one below?
Code:
Posted: Wed Dec 13, 2023 4:13    Post subject: VLAN configuration via GUI - 1 CPU port

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
teskilatimahsusa87
DD-WRT Novice


Joined: 04 Oct 2023
Posts: 42

PostPosted: Sun Jun 09, 2024 21:35    Post subject: Reply with quote
ho1Aetoo wrote:
This is the same configuration as in the other post where you said it wouldn't work?

So how did you solve the problem? by plugging the cable into the right socket?

Laughing

Maybe it is your own job to check that the cable is connected to the correct port.

We do not have physical access to your router and cables over the internet.


Oh lol it's indeed the same haha. You got me Laughing That was a different device back then, I think I later discovered that LAN1 port was goner. So that fooled me.

I am sorry if I triggered someone, this now works perfectly. Thanks everyone who helped.
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum