New Build - 03/13/2024 - r55363

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5785

PostPosted: Wed Mar 13, 2024 16:30    Post subject: New Build - 03/13/2024 - r55363 Reply with quote
Welcome to Atheros r55363 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 55303 (mirror)

OpenVPN 2.6.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
r54203 r54248 r54420 r54475 r54517 r54545 r54569 r54604 r54637 r54652 r54682 r54905 r54914 r55003 r55009 r55033
r55052 r55109 r55179 r55209 r55262 r55303 r55363

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1057

PostPosted: Wed Mar 13, 2024 17:11    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000
File/Kernel: DD-WRT v3.0-r55363 std (03/13/24)
Previous/Reset: DD-WRT v3.0-r55302 std (03/06/24)
Mode/Status: Gateway / Working Normally
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r57525 std (07/21/24)
Linux 4.9.337 #745 SMP Wed Jul 10 04:29:39 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
SmartDNS (using Cloudflare, Quad9 and Google), no QoS, no SFE
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w=4/>/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 224

PostPosted: Wed Mar 13, 2024 17:32    Post subject: Reply with quote
r9000
previous 54682
reset:no
Services, WDS AP 5GHz, AP 2.4, SMB, Inadyn, DHCP, DNS, Guest VAPs,

Build looks good, SMB Writes no longer appear to be causing issues from windows (though only a cursory test), SMB Responsiveness seems to need a few more minutes than 54682 after everything starts up but can live with that.

Thanks BS
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 84

PostPosted: Wed Mar 13, 2024 17:54    Post subject: Reply with quote
Update method: SSH / CLI using JuiceSSH
Router/Version: Netgear R9000
File/Kernel: DD-WRT v3.0-r55363 std (03/13/24)
Previous/Reset: DD-WRT v3.0-r55262 std (03/03/24) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

Looking Good Cool

_________________
Current: Netgear R9000 DD-WRT v3.0-r55460 std (03/25/24)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
computerperson
DD-WRT Novice


Joined: 16 May 2019
Posts: 44

PostPosted: Wed Mar 13, 2024 18:23    Post subject: Reply with quote
nyddwrtuser330 wrote:
r9000
previous 54682
reset:no
Services, WDS AP 5GHz, AP 2.4, SMB, Inadyn, DHCP, DNS, Guest VAPs,

Build looks good, SMB Writes no longer appear to be causing issues from windows (though only a cursory test)


Netgear r7800 - the issue persists in this build (55363). Transfer of even a small file from Windows 10 Pro x64 computer to router-mounted 64 GB thumb drive causes a full reboot of the router.

_________________
- a candle loses nothing by lighting another candle
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3117
Location: Germany

PostPosted: Wed Mar 13, 2024 18:58    Post subject: Reply with quote
Router/Version: R7800
File/Kernel: Linux 6.1.80 #114 SMP Tue Mar 5 13:32:55 +07 2024 armv7l
Previous/Reset: r55179 / no
Mode/Status: WAP / working
Services Used: VLAN-Trunk, SSH ed25519,WiFi 2,4Ghz + 5Ghz AP's + VAP's Vanilla,USB
Issues/Errors: non so far

This seems to be the first kernel 6 build that has a good performance

_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 444

PostPosted: Wed Mar 13, 2024 19:05    Post subject: Reply with quote
Router/Version: Netgear XR500 Nighthawk Pro Gaming (Install guide by egc)
Firmware: DD-WRT v3.0-r55363 std (03/13/24)
Kernel: Linux 6.1.80 #114 SMP Tue Mar 5 13:32:55 +07 2024 armv7l
Previous: DD-WRT v3.0-r55262 std (03/03/24)
Update Method: SSH / CLI using PuTTY with ‘firmware.bin’ install
Mode/Status: Gateway / Ok
Reset: No
Setup:
2.4 GHz N/G Mixed 20 MHz WPA2 - Vanilla, 2.4 GHz guest (VAP) WPA2
5.0 GHz AC/N Mixed 80 MHz WPA2 - Vanilla
IPv4, DHCP, DNSMasq, Static Leases, Port Forwarding
USB 3.2 Gen 1 (USB 3.0) Seagate One Touch 2TB STKB2000400 (exFAT), NAS, Samba (Restricted User/Password)
NTP Client
Wireguard Server
Wake-on-WAN (Internet)
SFE Disabled, QoS Disabled
Issues/Errors: Router crashes and reboots immediately when trying to upload a file using SMB Windows 10, File Explorer, to USB drive attached to router

Thanks B.S.

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 224

PostPosted: Wed Mar 13, 2024 19:19    Post subject: Reply with quote
computerperson wrote:
nyddwrtuser330 wrote:
r9000
previous 54682
reset:no
Services, WDS AP 5GHz, AP 2.4, SMB, Inadyn, DHCP, DNS, Guest VAPs,

Build looks good, SMB Writes no longer appear to be causing issues from windows (though only a cursory test)


Netgear r7800 - the issue persists in this build (55363). Transfer of even a small file from Windows 10 Pro x64 computer to router-mounted 64 GB thumb drive causes a full reboot of the router.


r9k is k4.9, so may be different. But was able to CRUD of 16MB file on connected USB Sata SSd, no issues.
sope
DD-WRT Novice


Joined: 25 Jul 2022
Posts: 9

PostPosted: Wed Mar 13, 2024 23:10    Post subject: Reply with quote
New Build - 03/13/2024 - r55363 "BRICKED" MY EA8500, by sending it into the dreaded boot loop and I had to take it apart and use the USB Serial UART Thankfully I put it on my Mesh AP as a test and not my EA8500 that is the internet gateway for my IOT. I had to restore the router TWICE with the method described at https://mrjcd.com/EA8500_DD-WRT/ because I was stubborn enough to try flashing r55363 again. I went back to 9/8/23 r53469 which is stable for me but the 2.4 GHz is terrible. Thus I use another router (the Archer C7v4 I replaced with the EA8500) as AP for 2.4GHz. I never take time to post on here, meaning maybe I posted 3 or 4 times since 1998. I used to always be able to flash any "beta" firmware release without ever worrying that it would "brick" a router. If anything, maybe there was some issue that made me revert back to previous known good version. I have two of these routers. I have had at least 2 nightmares with both of them. I recently discovered that for some reason they don't like the restore to default via firmware instead of the button.

Example:
I also flashed my Archer C7s and it appeared to be good but STP stopped working correctly and there were looping conditions and thus I reverted back to 8/13/22 r49681 which has been stable for me. My point here is I put 55363 on four Archer C7v4 routers. My Ubiquiti consol started showing the DHCP looping issue BUT THE ROUTERS DID NOT BRICK.

At the risk of being rude (but I am just being honest). I am now afraid to trust any firmware upgrades with DD-WRT ever since deciding to buy 2 of these EA8500s. I think that once the router is stable and working for months without issue, one should not have to worry about a newer update actually bricking the router.

I am not one to upgrade my routers for sake of doing upgrades but I thought it might be nice to try to get into 2024. Obviously I can't trust it. Take this as you will. I'll send another donation when I can. Limited income here...thus I look for routers in recycling center dumpsters.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14560
Location: Texas, USA

PostPosted: Wed Mar 13, 2024 23:58    Post subject: Reply with quote
It always pays to have a little look around to know what's going on and know that the EA8500's current status is not good for DD-WRT:

EA8500 and other models not booting after 53562 builds

Full reset and rebuild of EA8500 Gateway Router [r53562]

Complaints noted.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6327
Location: Texas

PostPosted: Thu Mar 14, 2024 0:54    Post subject: Reply with quote
Netgear WNDR3700 V4
DD-WRT v3.0-r55363 std (03/13/24)
Linux 3.18.140-d6 #195579 Wed Mar 13 15:25:59 +06 2024 mips
GUI install over r55350
WAP + OVPN server

#

Linksys WRT160NL
DD-WRT v3.0-r55363 std (03/13/24)
Linux 3.10.108-d11 #155116 Wed Mar 13 12:48:51 +06 2024 mips
GUI install over r55350
WAP + OVPN server

#

Linksys E2100L
DD-WRT v3.0-r55363 std (03/13/24)
Linux 3.10.108-d11 #155120 Wed Mar 13 12:52:54 +06 2024 mips
GUI install over r55350
WAP + OVPN server


All up over 3 hrs and worky veddy berry good Smile
lexridge
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1289
Location: WV, USA

PostPosted: Thu Mar 14, 2024 3:39    Post subject: Reply with quote
sope wrote:
New Build - 03/13/2024 - r55363 "BRICKED" MY EA8500, by sending it into the dreaded boot loop and I had to take it apart and use the USB Serial UART


Normally this router would have booted back to a working partition after 3 failed attempts. However with k6.1 builds, this doesn't happen (a 3x power cycle still works in this case however). Instead it goes through 5 reboots on the bad build, then resets NVRAM, and continues to attempt to boot from the bad build. It will eventually boot, after about 15-35 minutes. Then boots quickly and reliably every time, until you make any NVRAM (aside from UN/PW) changes. Then it starts all over again.

Early k6.1 builds would boot from partition 2, but not partition 1. This got reversed on a test build and has remained this way ever since.

Side note: I am going to back off from r53562 and see if my 2.4ghz wifi gets better, within the next day or two perhaps.

_________________
- Linksys EA8500: I-Gateway, AP/VAP 5ghz only r56820: Features: WDS-AP, VLANs, Samba, WG, Entware
- Linksys EA8500: WDS Station x2 - r56941
- Netgear R6400v2: WAP/VAP 2.4ghz only w/VLANs over single trunk port. r56820
- Netgear R7800 (WDS-AP, WAP/VAP) - r56820: Features in use: multiple VLANs over single trunk port
- Linksys MR7350: Testing r56941
- Linksys Velop WHW03v1 x2: OpenWRT w/GRETAP tunnel for VLANs on VAPs
- OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.

- Forum member #248
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 829
Location: Pittsburgh, PA USA

PostPosted: Thu Mar 14, 2024 13:21    Post subject: Reply with quote
Router/Version: Netgear R7800 x 3
File/Kernel: DD-WRT v3.0-r55363 std (03/13/24)
Previous/Reset: DD-WRT v3.0-r55262 std (03/03/24), last reset at 54905
Mode/Status: Gateway (SFE disabled), Access Point (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k), IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS/DNSMasq, OpenVPN server, Wireguard Server + 2 wired access points (VANILLA firmware,2.4GHz, 5GHZ, WPA2/WPA3, 802.11r/v/k)
Issues/Errors:
Up 21 hours. USB 3.0 working properly for Entware and "jffs" partitions. Wireguard and OpenVPN servers working as expected and throughput sufficient to open video files on network shares. Speed (tested via nPerf.com) is very close to published, both wired and wireless, which is equal or favorable to the ISP router. SFE remains disabled due to random reboots. Router LAN lights are working.

Seems to be working fine. Thanks BS for fixing the compile issue that was preventing the builds from being generated.

Thanks Brainslayer and Devs

_________________
__________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 1012

PostPosted: Thu Mar 14, 2024 14:45    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r55363) / Linux 6.1.80 #114 SMP Tue Mar 5 13:32:55 +07 2024 armv7l
Previous/Reset: DD-WRT v3.0-r55262 std (03/03/24) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, WPA2/WPA3-Personal, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, SuperSpeed USB Storage (guide by egc), lighttpd (using Entware’s php8), WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
SurprisedItWorks
DD-WRT Guru


Joined: 04 Aug 2018
Posts: 1472
Location: Appalachian mountains, USA

PostPosted: Thu Mar 14, 2024 21:12    Post subject: Reply with quote
Request: If you are reporting on SMB/USB success/failure, please state the drive format. Are these ext2/ext4 drives? Or are we talking one of the Windozy formats?
_________________
Dynalink DL-WRX36 on 57200, 2x Netgear XR500 and 4x Linksys WRT1900ACSv2 on 55630: VLANs, VAPs, NAS, station mode, OpenVPN client (AirVPN), wireguard server (AirVPN port forward) and clients (AzireVPN, AirVPN, private), 3 DNSCrypt providers via VPN.
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum