DD-WRT :: View topic - i hope i did wr941v5 to ddwrt

i hope i did wr941v5 to ddwrt

DD-WRT Forum Index -> Atheros WiSOC based Hardware

Goto page Previous 1, 2, 3

View previous topic :: View next topic

Author

Message

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 8:26 Post subject:
i found linux code to erse nvram https://wiki.dd-wrt.com/wiki/index.php/Serial_Recovery but after that i should flash new ddwrt? or stock tplink? i now research how to do that, i will not erse before i found how to write new os

Sponsor

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 8:34 Post subject:

Code:

nsole [ttyS0] enabled, bootconsole disabled
[ 0.420000] console [ttyS0] enabled, bootconsole disabled
[ 0.440000] guessed flashsize = 4M
[ 0.440000] scanning for root partition
[ 0.440000] tplink uboot detected
[ 0.450000] guessed bootloader size = 20000
[ 0.460000]
[ 0.460000] found squashfs at 110000
[ 0.460000] Creating 8 MTD partitions on "ar7240-nor0":
[ 0.470000] 0x000000000000-0x000000020000 : "RedBoot"
[ 0.470000] 0x000000020000-0x0000003e0000 : "linux"
[ 0.480000] 0x000000110000-0x0000003d0000 : "rootfs"
[ 0.490000] mtd: partition "rootfs" set to be root filesystem
[ 0.490000] 0x0000003d0000-0x0000003e0000 : "ddwrt"
[ 0.500000] 0x0000003e0000-0x0000003f0000 : "nvram"
[ 0.500000] 0x0000003f0000-0x000000400000 : "board_config"
[ 0.510000] 0x000000000000-0x000000400000 : "fullflash"
[ 0.520000] 0x000000000000-0x000000020000 : "fullboot"
[ 0.530000] libphy: Fixed MDIO Bus: probed
[ 0.530000] tun: Universal TUN/TAP device driver, 1.6
[ 0.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.540000] PPP generic driver version 2.4.2
[ 0.550000] PPP BSD Compression module registered
[ 0.550000] PPP Deflate Compression module registered
[ 0.560000] PPP MPPE Compression module registered
[ 0.560000] NET: Registered protocol family 24
[ 0.580000] u32 classifier
[ 0.590000] Performance counters on
[ 0.590000] input device check on
[ 0.590000] Actions configured
[ 0.600000] Netfilter messages via NETLINK v0.30.
[ 0.600000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[ 0.610000] nf_conntrack_rtsp v0.6.21 loading
[ 0.610000] nf_nat_rtsp v0.6.21 loading
[ 0.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.620000] TCP: westwood registered
[ 0.630000] TCP: hybla registered
[ 0.630000] TCP: vegas registered
[ 0.630000] NET: Registered protocol family 17
[ 0.640000] Bridge firewalling registered
[ 0.640000] 8021q: 802.1Q VLAN Support v1.8
[ 0.650000] searching for nvram
[ 0.650000] nvram size = 0
[ 0.680000] Atheros AR71xx hardware watchdog driver version 0.1.0
[ 0.690000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
[ 0.980000] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 0.980000] Call Trace:[<8006dd2c>] 0x8006dd2c
[ 0.980000] [<8006dd2c>] 0x8006dd2c
[ 0.980000] [<800a99c0>] 0x800a99c0
[ 0.980000] [<800a9c64>] 0x800a9c64
[ 0.980000] [<80187218>] 0x80187218
[ 0.980000] [<800a8274>] 0x800a8274
[ 0.980000] [<800a8274>] 0x800a8274
[ 0.980000] [<800a82e0>] 0x800a82e0
[ 0.980000] [<800aa988>] 0x800aa988
[ 0.980000] [<800aa7ac>] 0x800aa7ac
[ 0.980000] [<800a7b34>] 0x800a7b34
[ 0.980000] [<8006bfe8>] 0x8006bfe8
[ 0.980000] [<80060430>] 0x80060430
[ 0.980000] [<800a021c>] 0x800a021c
[ 0.980000] [<80070568>] 0x80070568
[ 0.980000] [<8007d764>] 0x8007d764
[ 0.980000] [<8007d7a4>] 0x8007d7a4
[ 0.980000] [<800aa988>] 0x800aa988
[ 0.980000] [<800aa7b4>] 0x800aa7b4
[ 0.980000] [<800b2cdc>] 0x800b2cdc
[ 0.980000] [<8007db58>] 0x8007db58
[ 0.980000] [<80060430>] 0x80060430
[ 0.980000] [<80064550>] 0x80064550
[ 0.980000] [<80185c08>] 0x80185c08
[ 0.980000] [<800aa31c>] 0x800aa31c
[ 0.980000] [<800a92b8>] 0x800a92b8
[ 0.980000] [<800a9360>] 0x800a9360
[ 0.980000] [<801871d4>] 0x801871d4
[ 0.980000] [<800a95f0>] 0x800a95f0
[ 0.980000] [<80096ed4>] 0x80096ed4
[ 0.980000] [<801894e4>] 0x801894e4
[ 0.980000] [<80183bec>] 0x80183bec
[ 0.980000] [<8017fd24>] 0x8017fd24
[ 0.980000] [<80177aa8>] 0x80177aa8
[ 0.980000] [<80184950>] 0x80184950
[ 0.980000] [<80079988>] 0x80079988
[ 0.980000] [<80178218>] 0x80178218
[ 0.980000] [<80179d24>] 0x80179d24
[ 0.980000] [<801926e0>] 0x801926e0
[ 0.980000] [<800d6348>] 0x800d6348
[ 0.980000] [<800d623c>] 0x800d623c
[ 0.980000] [<800d05d0>] 0x800d05d0
[ 0.980000] [<800db6b0>] 0x800db6b0
[ 0.980000] [<800d06d8>] 0x800d06d8
[ 0.980000] [<800de564>] 0x800de564
[ 0.980000] [<800dc130>] 0x800dc130
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800de804>] 0x800de804
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800df6b8>] 0x800df6b8
[ 0.980000] [<8018b18c>] 0x8018b18c
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<800ea0cc>] 0x800ea0cc
[ 0.980000] [<803004a8>] 0x803004a8
[ 0.980000] [<803004c8>] 0x803004c8
[ 0.980000] [<800d19a4>] 0x800d19a4
[ 0.980000] [<800689b0>] 0x800689b0
[ 0.980000] [<802eda40>] 0x802eda40
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<80064818>] 0x80064818
[ 0.980000] [<80097e84>] 0x80097e84
[ 0.980000] [<800647f4>] 0x800647f4
[ 0.980000] [<80060478>] 0x80060478
[ 0.980000]
[ 0.980000] handlers:
[ 0.980000] [<801871d4>] 0x801871d4
[ 0.980000] Disabling IRQ #11
[ 1.240000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.240000] Freeing unused kernel memory: 204k freed
[ 3.510000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 3.810000] ag71xx ag71xx.0 eth0: invalid speed specified
[ 3.820000] ag71xx: probe of ag71xx.0 failed with error -22
[ 4.080000] compat-drivers backport release: compat-drivers-2013-03-28-5
[ 4.090000] Backport based on wireless-testing.git master-2013-04-16
[ 4.090000] compat.git: wireless-testing.git
[ 4.290000] cfg80211: Calling CRDA to update world regulatory domain
[ 4.300000] cfg80211: World regulatory domain updated:
[ 4.310000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.340000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.350000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5.000000] ath: phy0: Couldn't reset chip
[ 5.000000] ath: phy0: Unable to initialize hardware; initialization status: -5
[ 5.010000] ath9k ath9k: failed to initialize device
[ 5.010000] ath9k: probe of ath9k failed with error -5

should i do that in putty or sercomm?

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 8:51 Post subject:

i found my topic how i make it work,unbrick https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=304918&highlight=

i cant remember where to put firmver stock? and how should renamed name be?
please help me

i try type tpl dont react

Code:

▒▒L▒▒▒▒0B▒▒▒ O▒1JJ▒a▒LS▒�C▒+▒r▒▒▒▒▒▒▒console [ttyS0] enabled, bootco▒r▒▒▒▒▒▒▒consiE▒▒M▒Օ▒͕▒▒flashsize = 4M
[ 0.440000] scanning for root partition
[ 0.440000] tplink uboot d
etected
[ 0.450000] guessed bootloader size = 20000
[ 0.460000]
[ 0.460000] found squashfs at 110000
[ 0.460000] Creating 8 MTD partitions on "ar7240-nor0":
[ 0.470000] 0x000000000000-0x000000020000 : "RedBoot"
[ 0.470000] 0x000000020000-0x0000003e0000 : "linux"
[ 0.480000] 0x000000110000-0x0000003d0000 : "rootfs"
[ 0.490000] mtd: partition "rootfs" set to be root filesystem
[ 0.490000] 0x0000003d0000-0x0000003e0000 : "ddwrt"
[ 0.500000] 0x0000003e0000-0x0000003f0000 : "nvram"
[ 0.500000] 0x0000003f0000-0x000000400000 : "board_config"
[ 0.510000] 0x000000000000-0x000000400000 : "fullflash"
[ 0.520000] 0x000000000000-0x000000020000 : "fullboot"
[ 0.530000] libphy: Fixed MDIO Bus: probed
[ 0.530000] tun: Universal TUN/TAP device driver, 1.6
[ 0.540000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.540000] PPP generic driver version 2.4.2
[ 0.550000] PPP BSD Compression module registered
[ 0.550000] PPP Deflate Compression module registered
[ 0.560000] PPP MPPE Compression module registered
[ 0.560000] NET: Registered protocol family 24
[ 0.580000] u32 classifier
[ 0.590000] Performance counters on
[ 0.590000] input device check on
[ 0.590000] Actions configured
[ 0.600000] Netfilter messages via NETLINK v0.30.
[ 0.600000] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[ 0.610000] nf_conntrack_rtsp v0.6.21 loading
[ 0.610000] nf_nat_r
tsp v0.6.21 loading
[ 0.620000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.620000] TCP: westwood registered
[ 0.tpl630000] TCP: hybla registered
[ 0.630000] TCP: vegas registered
[ 0.630000] NET: Registered protocol family 17
[ 0.640000] Bridge firewalling registered
[ 0.640000] 8021q: 802.1Q VLAN Support v1.8
[ 0.650000] searching for nvram
[ 0.650000] nvram size = 0
[ 0.680000] Atheros AR71xx hardware watchdog driver version 0.1.0
[ 0.690000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000

tpltpl
[ 0.980000] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 0.980000] Call Trace:[<8006dd2c>] 0x8006dd2c
[ 0.980000] [<8006dd2c>] 0x8006dd2c
[ 0.980000] [<800a99c0>] 0x800a99c0
[ 0.980000] [tpl<800a9c64>] 0x800a9c64
[ 0.980000] [<80187218>] 0x80187218
[ 0.980000] [<8009bd38>] 0x8009bd38
[ 0.980000] [<800a8274>] 0x800a8274
[ 0.980000] [<800a8274>] 0x800a8274
[ 0.980000] [<800a82e0>] 0x800a82e0
[ 0.980000] [<800aa988>] 0x800aa988
[ 0.980000] [<800aa7ac>] 0x800aa7ac
[ 0.980000] [<800a7b34>] 0x800a7b34
[ 0.980000] [<8006bfe8>] 0x8006bfe8
[ 0.980000] [<80060430>] 0x80060430
[ 0.980000] [<800a021c>] 0x800a021c
[ 0.980000] [<80070568>] 0x80070568
[ 0.980000] [<8007d764>] 0x8007d764

[ 0.980000] [<8007d7a4>] 0x8007d7a4
[ 0.980000] [<800aa988>] 0x800aa988
[ 0.980000] [<800aa7b4>] 0x800aa7b4
[ 0.980000] [<800b2cdc>] 0x800b2cdc
[ 0.980000] [<8007db58>] 0x8007db58
[ 0.980000] [<80060430>] 0x80060430
[ 0.980000] [<80064550>] 0x80064550
[ 0.980000] [<80185c08>] 0x80185c08
[ 0.980000] [<800aa31c>] 0x800aa31c
[ 0.980000] [<800a92b8>] 0x800a92b8
[ 0.980000] [<800a9360>] 0x800a9360
[ 0.980000] [<801871d4>] 0x801871d4
[ 0.980000] [<800a95f0>] 0x800a95f0
[ 0.980000] [<80096ed4>] 0x80096ed4
[ 0.980000] [<801894e4>] 0x801894e4
[ 0.9tpl80000] [<80183bec>] 0x80183bec
[ 0.980000] [<8017fd24>] 0x8017fd24
[ 0.980000] [<80177aa8>] 0x80177aa8
[ 0.980000] [<80184950>] 0x80184950
[ 0.980000] [<80079988>] 0x80079988
[ 0.980000] [<80178218>] 0x80178218
[ 0.980000] [<80179d24>] 0x80179d24
[ 0.980000] [<801926e0>] 0x801926e0
[ 0.980000] [<800d6348>] 0x800d6348
[ 0.980000] [<800d623c>] 0x800d623c
[ 0.980000] [<800d05d0>] 0x800d05d0
[ 0.980000] [<800db6b0>] 0x800db6b0
[ 0.980000] [<800d06d8>] 0x800d06d8
[ 0.980000] [<800de564>] 0x800de564
[ 0.980000] [<800dc130>] 0x800dc130
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800de804>] 0x800de804
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800df6b8>] 0x800df6b8
[ 0.980000] [<8018b18c>] 0x8018b18c
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<800ea0cc>] 0x800ea0cc
[ 0.980000] [<803004a8>] 0x803004a8
[ 0.980000] [<803004c8>] 0x803004c8
[ 0.980000] [<800d19a4>] 0x800d19a4
[ 0.980000] [<800689b0>] 0x800689b0
[ 0.980000] [<802eda40>] 0x802eda40
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<8tpl0064818>] 0x80064818
[ 0.980000] [<80097e84>] 0x80097e84
[ 0.980000] [<800647f4>] 0x800647f4
[ 0.980000] [<80060478>] 0x80060478
[ 0.980000]
[ 0.980000] handlers:
[ 0.980000] [<801871d4>] 0x801871d4
[ 0.980000] Disabling IRQ #11
[ 1.240000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.250000] Freeing unused kernel memory: 204k freed

tpltpl
tpltpl
tpltpl

tpl
tpltpl
tpltpl
tpl
tpltpl
tpltpl
tpl[ 3.550000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
tpl
tpl[ 3.860000] ag71xx ag71xx.0 eth0: invalid speed specified
[ 3.860000] ag71xx: probe of ag71xx.0 failed with error -22

tpl[ 4.120000] compat-drtplivers backport release: compat-drivers-2013-03-28-5
[ 4.130000] Backport based on wireless-testing.git master-2013-04-16
[ 4.130000] compat.git: wireless-testing.git
tpl
[ 4.330000] cfg80211: Calling CRDA to update world regulatory domain
[ 4.340000] cfg80211: World regulatory domain updated:
[ 4.350000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.350000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.360000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.370000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.380000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.390000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
tpl
tpl
tpl
tpl[ 5.040000] ath: phy0: Couldn't reset chip
[ 5.040000] ath: phy0: Unable to initialize hardware; initialization status: -5
[ 5.050000] ath9k ath9k: failed to initialize device
[ 5.050000] ath9k: probe of ath9k failed with error -5

tpl
tpl

Last edited by slowmotionscene on Thu Jan 11, 2024 9:33; edited 1 time in total

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 9:16 Post subject:

Code:

0.980000] [<80184950>] 0x80184950
[ 0.980000] [<80079988>] 0x80079988
[ 0.980000] [<80178218>] 0x80178218
[ 0.980000] [<80179d24>] 0x80179d24
[ 0.980000] [<801926e0>] 0x801926e0
[ 0.980000] [<800d6348>] 0x800d6348
[ 0.980000] [<800d623c>] 0x800d623c
[ 0.980000] [<800d05d0>] 0x800d05d0
[ 0.980000] [<800db6b0>] 0x800db6b0
[ 0.980000] [<800d06d8>] 0x800d06d8
[ 0.980000] [<800de564>] 0x800de564
[ 0.980000] [<800dc130>] 0x800dc130
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800de804>] 0x800de804
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<800df6b8>] 0x800df6b8
[ 0.980000] [<8018b18c>] 0x8018b18c
[ 0.980000] [<8012af48>] 0x8012af48
[ 0.980000] [<800ea0cc>] 0x800ea0cc
[ 0.980000] [<803004a8>] 0x803004a8
[ 0.980000] [<803004c8>] 0x803004c8
[ 0.980000] [<800d19a4>] 0x800d19a4
[ 0.980000] [<800689b0>] 0x800689b0
[ 0.980000] [<802eda40>] 0x802eda40
[ 0.980000] [<802ed20c>] 0x802ed20c
[ 0.980000] [<80064818>] 0x80064818
[ 0.980000] [<80097e84>] 0x80097e84
[ 0.980000] [<800647f4>] 0x800647f4
[ 0.980000] [<80060478>] 0x80060478
[ 0.980000]
[ 0.980000] handlers:
[ 0.980000] [<801871d4>] 0x801871d4
[ 0.980000] Disabling IRQ #11
[ 1.240000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.250000] Freeing unused kernel memory: 204k freed

nvram earse
nvram earse
nvram earse
nvram earse
nvram earse
nvram earse[ 3.530000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:MII

[ 3.830000] ag71xx ag71xx.0 eth0: invalid speed specified
[ 3.840000] ag71xx: probe of ag71xx.0 failed with error -22
nvram earse
[ 4.100000] compat-drivers backport release: compat-drivers-2013-03-28-5
[ 4.110000] Backport based on wireless-testing.git master-2013-04-16
[ 4.110000] compat.git: wireless-testing.git
nvram earse[ 4.310000] cfg80211: Calling CRDA to update world regulatory domain
[ 4.320000] cfg80211: World regulatory domain updated:
[ 4.320000] cfg80211: (
start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4.330000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.340000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.350000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4.360000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4.360000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
nvram earse
nvram earse
nvram earse
[ 5.020000] ath: phy0: Couldn't reset chip
[ 5.020000] ath: phy0: Unable to initialize hardware; initialization status: -5
[ 5.030000] ath9k ath9k: failed to initialize device
[ 5.030000] ath9k: probe of ath9k failed with error -5
nvram earse
nvram earse
nvram earse
nvram earse
nvram earse

nvram earsenvram earse
nvram earse
nvram earse
nvram earsenvram earse

nvram earse
nvram earsenvram earse
nvram earse
nvram earse
nvram earsenvram earse

nvram earsenvram earse

in putty wont take command

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 9:54 Post subject:

look like hard error

Code:

[ 5.060000] ath: phy0: Unable to initialize hardware; initialization status: -5
[ 5.070000] ath9k ath9k: failed to initialize device
[ 5.070000] ath9k: probe of ath9k failed with error -5

dale_gribble39
DD-WRT Guru

Joined: 11 Jun 2022
Posts: 1959

Posted: Thu Jan 11, 2024 17:25 Post subject:

You're not breaking boot. Also 'nvram erase' is for Broadcom, not Atheros. More reading for you:

https://openwrt.org/toh/tp-link/tl-wr941nd

https://oldwiki.archive.openwrt.org/toh/tp-link/tl-wr941nd

You have to break boot at the '1 second' message (if you can see it). May try spacebar. Ideally, considering the track record here, you should try TFTP flash first.

Code:

Setup a TFTP server on your computer with the static address 192.168.0.66 - Put the image (without UBoot!) into the TFTP root directory and rename it to wr941ndv5_tp_recovery.bin*

Now connect the WAN port of the router with your computer's ethernet port, power up the router and hold the reset button pressed (stop pressing the reset button when the lock symbol led turned on).

* - the filename may not be correct, only way to know for sure is to set up TFTPD32/64 properly and see what filename it asks for.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 21:24 Post subject:

When am connect via tftpd32 by ph jounin programm set name like is wr941ndv5_tp_recovery.bin what is rename of original file name what am downloaded from loms revert stock original tplink.I put lan in pc and in wan od router turn on power and press reset button until wpc lock led is turn on than relase nothing happend dont make request(if name is wrong i see whan search by that renam do) no log viewer is empty https://i.imgur.com/S1YIt0i.jpeg

When i connect via serial cable in putty and in serrcom programm all letters and number have ok all words are, and fast goes down on putty than stop at

Code:

[ 5.040000] ath9k ath9k: failed to initialize device
[ 5.050000] ath9k: probe of ath9k failed with error -5

https://i.imgur.com/bYtJNao.mp4

dale_gribble39
DD-WRT Guru

Joined: 11 Jun 2022
Posts: 1959

Posted: Thu Jan 11, 2024 22:23 Post subject:

So, wifi is not broadcasting, you cannot connect via LAN ethernet port to http://192.168.1.1 after setting static IP, cannot ping it, and TFTP is not working. It's probably something simple, but we don't have all the information and that's about all the help I can give you. Good luck.
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.
--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Thu Jan 11, 2024 22:44 Post subject:
I would like to give you information i need my router and am well to learn to unbrick,fix myself router.What to do buddy? How to got informations i will show you to help me. Good day sir

slowmotionscene
DD-WRT User

Joined: 03 Oct 2014
Posts: 365

Posted: Sun Jan 28, 2024 21:56 Post subject:
Did someone fugured what it is if is something small problem ?

UnicornStallion
DD-WRT User

Joined: 31 Dec 2023
Posts: 59
Location: Iowa, US

Posted: Mon Jan 29, 2024 19:51 Post subject:

slowmotionscene wrote:

Did someone fugured what it is if is something small problem ?

I think you've already been given all the information that anyone can give you. The fact is you bricked the router by flashing an incompatible firmware despite a clear warning in red text in the router database that the FCC ID on your model will brick if you fly to flash dd-wrt to it.

The only thing you can do to recover it at this point is try to flash it back to factory firmware using tftp or the internal TTL port.
_________________
- Netgear R7800 -- OpenWRT 23.05.2
- Cellular modem with CGNAT
- SMB NAS with multiple users and private directories.
- USB hard disk plugged into router as NAS drive.

Goto page Previous 1, 2, 3

Display posts from previous:

Page 3 of 3

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

i hope i did wr941v5 to ddwrt

Quick Links

Log in