Router Model: TP-Link TL-WR1043ND v1.8
Firmware Version: DD-WRT v3.0-r54475 std (12/07/23)
Previous: DD-WRT v3.0-r53775 std (10/26/23)
File: tl-wr1043nd-webflash.bin
Kernel Version: Linux 3.10.108-d11 #147438 Thu Dec 7 04:49:16 +06 2023 mips
Mode: Gateway/Wireless Station (client)
Reset: None required
Status: OK
Uptime: 2 days, ~20 hours
Issues/Errors: Nothing new to report. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Router/Version: Buffalo WZR-600DHP
Previous/Reset: r51729 / no
Mode/Status: Wireless Station Bridge on 2.4ghz, 5ghz disabled / Running
Issues/Errors: Just the web UI/failure to ping from other LAN machines (sometimes resolves on its own)
Seems stable. Only used to provide wifi to a VOIP phone. Never solved the web UI access issue which seems to resolve sometimes. I can ssh tunnel port 80 through my main router (i.e. ssh -L80:192.168.1.254:80 192.168.1.1) to reach the UI. This is not a new issue.
Another big jump w/o a reset but doesn't seem like a problem.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin_r54475 / Linux 3.18.140-d6 #187076 Thu Dec 7 05:47:58 +06 2023 mips
Previous/Reset: r54248 / no
Mode/Status: AP wired and wireless / Up and running for 2:27 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 56029
Broadcom
Asus RT-AC87U R - DD-WRT 56029
Asus RT-N66U - DD-WRT 55819
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
R9000
Wds AP (5GHz), 2.4, guest VAP and Vlan, SMB, DDNS (dynDNS), Forced DNs, DOT redir, QOS Cake/HTB
300MB Down/ 20 Upstream
Upgraded via UI did not reset
All working well
R7800
WDS STA (5GHz VHT80), 5GHz VAP, 2.4 GHZ
Rolled back to 51589 (last known good)
This particular model has issues with STA Mode and VAPs on 5GHz since 51589. The new kernel is no exception. Only difference is problem is much clearer, the VAP 0.1 comes up but is set to channel 100+106 which is not configured anywhere, the main int 0.0 never establishes connection (probably the wrong channel but says Unknown)
