Posted: Mon Nov 27, 2023 6:04 Post subject: Static IPs on VLANS [Solved]
I have a Media VLAN on the 10.2.0.x subnet. It has its own DHCP server. I want my Roku TVs, which are on this subnet to have static IPs assigned by my EA8500. I have added this to dnsmasq Addition Options section:
Code:
#---------Media Devices--
dhcp-host=C8:FF:28:xx:xx:xx,Roku-LRoom,10.2.0.10,infinite
dhcp-host=44:D8:78:xx:xx:xx,Roku-MBRoom,10.2.0.11,infinite
dhcp-host=38:E7:C0:xx:xx:xx,Roku-75Garage,10.2.0.12,infinite
#dhcp-host=8C:49:62:xx:xx:xx,RokuEx_Garage,10.2.0.13,infinite
#---------End Media Devices--
It doesn't seem to be working but I think this is because this would actually be the main dhcp server options, and not the dhcp server options for the 10.2.0.x subnet. How to I add these options to the secondary dnsmasq server? _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Forum member #248
Last edited by lexridge on Mon Nov 27, 2023 20:26; edited 1 time in total
This should be working, well it does for me on R7800 r53445 using conf-file=/jffs/dnsmasq.custom
I even have the same mac address of my firesticks on both subnets in this file (without causing any issues) just in case they ever connect to the wrong SSID so they're always forced via PBR to route through the vpn.
Did you reboot router or restart dnsmasq after entry? _________________ Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.
No one can build you the bridge on which you, and only you, must cross the river of life!
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Mon Nov 27, 2023 13:08 Post subject:
Ive never had any issues to save my static leases from different subnets either via
GUI or advanced DNSmasq box (static IP lines)
just dont use the # in advanced DNSmasq rules as it messes things around...
for DNSmasq # means port... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
So if "#" and "--" cannot be used for comments, what can I use for my notes there? Semicolons?
This list consists of about 75 devices. I need to sort them with comments somehow. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
# Uncomment these to enable DNSSEC validation and caching:
# (Requires dnsmasq to be built with DNSSEC option.)
#conf-file=%%PREFIX%%/share/dnsmasq/trust-anchors.conf
#dnssec
Code:
# you may want to uncomment some or all of them if you use
# Windows clients and Samba.
#dhcp-option=19,0 # option ip-forwarding off
#dhcp-option=44,0.0.0.0 # set netbios-over-TCP/IP nameserver(s) aka WINS server(s)
#dhcp-option=45,0.0.0.0 # netbios datagram distribution server
#dhcp-option=46,8 # netbios node type
It's working. The problem was the TVs had to be rebooted because they had retained their previous IP addresses. After doing that and rebooting the router again, all is good now. Thanks and glad we got the comments question cleared up. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
