New Build - 11/21/2023 - r54095

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5630

PostPosted: Wed Nov 22, 2023 6:23    Post subject: New Build - 11/21/2023 - r54095 Reply with quote
Welcome to Broadcom r54095 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 54079 (mirror)

OpenVPN 2.6.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
4.4 cURL Gateworks 3.10 LTO QMI mac80211 rtl8156b x86 DC Marvell hostapd PCI bs Tor SFE bridge Unbound USB invalid
jffs2 ovpn-dco 6.1 4.14 ath11k

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: strace tcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 939

PostPosted: Wed Nov 22, 2023 7:21    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r54095) / Linux 4.4.302-st46 #10541 SMP Mon Nov 20 07:00:23 +06 2023 armv7l
Previous/Reset: DD-WRT v3.0-r54079 std (11/17/23) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + USB Storage high-speed (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none



dmesg_Dlink-DIR868L-RB_20231122151639.txt
 Description:

Download
 Filename:  dmesg_Dlink-DIR868L-RB_20231122151639.txt
 Filesize:  29.54 KB
 Downloaded:  228 Time(s)


messages_Dlink-DIR868L-RB_20231122151639.txt
 Description:

Download
 Filename:  messages_Dlink-DIR868L-RB_20231122151639.txt
 Filesize:  57.08 KB
 Downloaded:  234 Time(s)


_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1822
Location: Hung Hom, Hong Kong

PostPosted: Wed Nov 22, 2023 9:03    Post subject: Reply with quote
The firmware for Asus RT-N18U is still 50% of the usual size (since build 54079). Is this really normal?? Some previous builds had Unbound and Curl missing. Would NOT recommend flashing this one.
Code:
Index of /dd-wrtv2/downloads/betas/2023/11-22-2023-r54095/asus-rt-n18u/
asus_rt-n18u-firmware.trx                          22-Nov-2023 03:35            12734464

Code:
Index of /dd-wrtv2/downloads/betas/2023/11-17-2023-r54079/asus-rt-n18u/
asus_rt-n18u-firmware.trx                          17-Nov-2023 07:42            12734464

Code:
Index of /dd-wrtv2/downloads/betas/2023/11-01-2023-r53843/asus-rt-n18u/
asus_rt-n18u-firmware.trx                          01-Nov-2023 06:37            26951680

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 222

PostPosted: Wed Nov 22, 2023 9:27    Post subject: Reply with quote
Router/Version: Asus RT-AC87U R
Update method: WebUpgrade
File/Kernel: asus_rt-ac87u-firmware.trx_r54095 / Linux 4.4.302-st46 #10549 SMP Wed Nov 22 04:38:04 +06 2023 armv7l
Previous/Reset: r54079 / no
Mode/Status: Gateway / Up and running for 1:35 hours
Issues/Errors: Nothing significant

As always, the Quantenna chip has its own quirks. This is a closed source chipset
There is no way to install a channel. Crying or Very sad
But you can disable 5.0 GHz. @mpgalaxy hack "If you set the radio mode to station bridge and disable the network mode, the 5GHz device will turn off completely even after reboot." Wink

The fact is that the router is connected to the Internet (to the Internet provider). And it reports an error, the red WAN indicator flashes (the icon in the form of a planet). The internet works, I just think it's a glitch.
But this does not affect the work.
Just relax
Cool

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55109
Broadcom
Asus RT-AC87U R - DD-WRT 55109
Asus RT-N66U - DD-WRT 55109
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Lukatoni
DD-WRT Novice


Joined: 01 Nov 2023
Posts: 11

PostPosted: Wed Nov 22, 2023 12:34    Post subject: Reply with quote
Does this build still crash/reboot devices like previous ones due to full cache (or so I've heard) issues through the cpugov?
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Wed Nov 22, 2023 12:38    Post subject: Reply with quote
Lukatoni wrote:
Does this build still crash/reboot devices like previous ones due to full cache (or so I've heard) issues through the cpugov?


That is for some routers which are ported to Kernel 6.1 so not for Broadcom routers.

But take a look for yourself it the previous build threads Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Wed Nov 22, 2023 16:18    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r54095M Community Build (11/21/23)
Kernel Version: Linux 4.4.302-st46 #1 SMP tue Nov 21 12:08:18 CET 2023 armv7l

Upgraded from: DD-WRT v3.0-r53941M Community Build (11/09/23)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Running one WireGuard tunnel to Mullvad with IPv6 and second WireGuard tunnel to own WG server for site-to-site connection also with IPv6.
OpenVPN client tested and working.
IPv6 working

Errors: Nothing encountered yet.

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
rnix
DD-WRT User


Joined: 23 Feb 2016
Posts: 184

PostPosted: Wed Nov 22, 2023 18:09    Post subject: Reply with quote
Also confrming Asus RT-N18U build r54095 is about 50% smaller than normal and possibly incomplete/broken.
I will not risk flashing it and will stay on r53843 which was last build before it became an issue.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6259
Location: Texas

PostPosted: Wed Nov 22, 2023 23:05    Post subject: Reply with quote
Asus RT-N12D1
DD-WRT v3.0-r54095 mega (11/22/23)
Linux 4.4.302-st46 #27015 Wed Nov 22 05:50:38 +06 2023 mips
looky ok just not using this for anything

Got a PM 'bout midnight last night saying new builds were still showing his D1 as B1.
sent links such as:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1286172#1286172
https://svn.dd-wrt.com/changeset/52803
also said I haven't updated a RT-N12D1 in long time but would check when got time...
...that just what me checking...
and I see the message is still in me outbox with couple years ago post Neutral
tedm
DD-WRT Guru


Joined: 13 Mar 2009
Posts: 554

PostPosted: Thu Nov 23, 2023 14:46    Post subject: Reply with quote
Router/Version: Linksys E3000
File/Kernel: Linux 2.6.24.111 #33471 Wed Nov 22 02:32:59 +06 2023 mips
Previous/Reset: No
Mode/Status: OK
Issues/Errors: Did not brick

Upgraded via webflash using dd-wrt.v24-54095_NEWD-2_K2.6_mini-nv60k.bin from a prior dd-wrt build

What happened to the nv60k builds in K3?

Seems to be working fine
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Thu Nov 23, 2023 14:54    Post subject: Reply with quote
tedm wrote:
Router/Version: Linksys E3000
File/Kernel: Linux 2.6.24.111 #33471 Wed Nov 22 02:32:59 +06 2023 mips
Previous/Reset: No
Mode/Status: OK
Issues/Errors: Did not brick

Upgraded via webflash using dd-wrt.v24-54095_NEWD-2_K2.6_mini-nv60k.bin from a prior dd-wrt build

What happened to the nv60k builds in K3?

Seems to be working fine


You use the trailed builds which are automatically the right size.
K3 builds (which actually have Kernel 4.4) is the/my preferred choice as K4.4 is still supported as SLTS release and it has working WireGuard and OpenVPN

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
tedm
DD-WRT Guru


Joined: 13 Mar 2009
Posts: 554

PostPosted: Thu Nov 23, 2023 15:03    Post subject: Reply with quote
Router/Version: Netgear WNDR4000
File/Kernel: Linux 4.4.302-st46 #27015 Wed Nov 22 05:50:38 +06 2023 mips
Previous/Reset: r53775 K26 (which had a 25 day uptime)
Mode/Status: good
Issues/Errors: none

Used dd-wrt.v24-54095_NEWD-2_K3.x_mega-nv64k.bin

Nice to actually have file sizes on a "ls -l" in Busybox instead of having to kludge wc -c

Save/Apply still does not work when making changes to the ntp section of setup

ntpclient XXXX (where XXXX is your preferred ntp server) does seem to kick it in the rear to update time, though.
tedm
DD-WRT Guru


Joined: 13 Mar 2009
Posts: 554

PostPosted: Thu Nov 23, 2023 15:20    Post subject: Reply with quote
Router/Version: Linksys E3000
File/Kernel: Linux 4.4.302-st46 #27015 Wed Nov 22 05:50:38 +06 2023 mips
Previous/Reset: K26 / no
Mode/Status: OK
Issues/Errors: None

Upgraded from K26 r54095 to K3x r54095 using dd-wrt.v24-54095_NEWD-2_K3.x_mega-e3000.bin

Takes a long time (I think the router reboots twice) but eventually comes back up.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12795
Location: Netherlands

PostPosted: Thu Nov 23, 2023 15:23    Post subject: Reply with quote
Most routers have "ll" as alias for "ls -la"

In the Server IP/Name field the default is shown you can enter your own, space delimited then you will override the default settings

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
khayalan
DD-WRT Novice


Joined: 28 Feb 2021
Posts: 6

PostPosted: Thu Nov 23, 2023 15:36    Post subject: Reply with quote
Bump.

Quote:
Abnormal file size of Asus RT-N18U firmware again.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum