Buffalo WZR-1750DHP V3.0-r36410 std (07/28/18) - WB

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
Udis
DD-WRT Novice


Joined: 07 Sep 2020
Posts: 6

PostPosted: Wed Jun 07, 2023 18:01    Post subject: Buffalo WZR-1750DHP V3.0-r36410 std (07/28/18) - WB Reply with quote
Hi,
I have this router for sometimes and bought a Nighthawk and now I'll like to use (Buffalo router) as a Wireless Bridge but the documentation manual I have shows a UI (user interface) panels very different that the one I have accessing the router (looks that mine are very old). I don't know much about routers, so I'm afraid to make changes without proper documentation.
I'll appreciate help making the changes to have it as WB.
Thanks,
Sponsor
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1927

PostPosted: Wed Jun 07, 2023 20:16    Post subject: Reply with quote
There are no screenshots in the Client (now Station) Bridge wiki. First recommendation is to upgrade to the current release:

https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2023/06-06-2023-r52894/buffalo_wzr-1750dhp/

Wherever it says Client Bridge, the new release with have Station Bridge

This is going by the premise that you are talking about using that and not Repeater Bridge mode. But, the caveat is that you can only use Client mode on Broadcom ARM, anyway:

https://wiki.dd-wrt.com/wiki/index.php/Client_Bridge

Quote:
Broadcom ARM: dhd driver models (e.g. AC5300 routers) cannot support CB (nor repeater bridge) modes since the driver is controlled by wireless firmware internal to the chipset. This makes it impossible to implement fake bridge modes, and is not fixable. While it can sometimes work without encryption, there is no guarantee nor official support. The driver will usually crash in these modes.


https://wiki.dd-wrt.com/wiki/index.php/Client_Mode (again, Client = Station on new releases)

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Udis
DD-WRT Novice


Joined: 07 Sep 2020
Posts: 6

PostPosted: Wed Jun 07, 2023 21:24    Post subject: Reply with quote
Hi,
My idea was to use the Buffalo router to extend the wireless network of the Nighthawk, i.e. as a repeater, to cover locations where the Nighthawk doesn't provide a stable wireless connection.
Do I understand correctly that this will not work, since the end clients will always be wireless and not wired?
Thanks for your help,
Udis
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1927

PostPosted: Thu Jun 08, 2023 1:36    Post subject: Reply with quote
There is nothing that specifies anything about wired clients on the repeater device in the wikis that I'm aware of.

https://wiki.dd-wrt.com/wiki/index.php/Wlan_Repeater

Quote:
This mode is NOT for WIRED connections between two routers! It is a wireless connection only.

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum