Posted: Tue Jun 06, 2023 4:41 Post subject: New Build - 06/06/2023 - r52894
Welcome to Broadcom r52894 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Asus RT-N66U
File: dd-wrt.v24-52894_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r52894 big (06/06/23) (prev. DD-WRT v3.0-r52869 big (06/02/23))
Kernel: Linux 4.4.302-st40 #24235 Tue Jun 6 03:54:53 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed one hour ago, OK.
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Tue Jun 06, 2023 8:43 Post subject: DD-WRT BS build 52894 and Asus RT-N18U (speed test)
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r52894 std (06/06/23)
Kernel: Linux 4.4.302-st40 #9541 Tue Jun 6 03:14:45 +06 2023 armv7l
Previous: DD-WRT v3.0-r52720 std (05/27/23)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd, minidlna);
WAN DNS disabled; DDNS (no-ip.com) In-a-Dyn OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/06-06-2023-r52894/asus-rt-n18u/
Summary
Flashed using command-line with WEBUI httpd disabled.
No complaints before cold boot. Nothing to comment about after cold boot.
Well, "openssl version" displayed nothing.
Code:
# ls /usr/lib/libssl.so* -l
-rwxr-xr-x 1 root root 349648 Jun 6 05:20 /usr/lib/libssl.so.1.1
# openssl version
#
Router/Version: TP-Link Archer C8/V1
File/Kernel: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/06-06-2023-r52894/tplink_archer-c8v1/archer-c8-webflash.bin
Previous/Reset: r52369/no
Mode/Status: Router/
Issues/Errors: 1- On first boot the WebGUI does not respond. I telnet'd in and ran `kill `cat /tmp/var/run/httpd.pid` & httpd -n -p 80` then rebooted the router and the WebGUI is up again. 2- Under Status -> WAN -> WAN if you click "Connect" to connect to a PPPoE connection (fiber optic in my case) it disconnects all clients from the Wi-Fi antenna for 15-30 seconds. Not sure if this is a feature but it's super annoying. This was the case in r52396 also. _________________ Delivering pure fact does not mean you are rude. Ignoring social contract in the delivery of pure fact does make you rude.
Router/Version: Asus RT-AC88U
File/Kernel: DD-WRT v3.0-r52894 std (06/06/23) / Linux 4.4.302-st40 #9542 SMP Tue Jun 6 03:21:56 +06 2023 armv7l
Previous/Reset: not sure / No
Mode/Status: 2.4 repeater - 5GHz AP - WireGuard / OK
Issues/Errors: Up for 10 hours no issues so far, all the services I use are working. _________________ Asus RT-AC88U Donations
Joined: 26 Mar 2013 Posts: 1856 Location: Hung Hom, Hong Kong
Posted: Tue Jun 06, 2023 14:44 Post subject:
objecttothis wrote:
Issues/Errors: 1- On first boot the WebGUI does not respond. I telnet'd in and ran `kill `cat /tmp/var/run/httpd.pid` & httpd -n -p 80` then rebooted the router and the WebGUI is up again.
Try turning off the router, wait a while then turn it back on (cold boot). See if the problem persist...
Quote:
2- Under Status -> WAN -> WAN if you click "Connect" to connect to a PPPoE connection (fiber optic in my case) it disconnects all clients from the Wi-Fi antenna for 15-30 seconds. Not sure if this is a feature but it's super annoying. This was the case in r52396 also.
My guess is that the WAN reconnection will trigger reloading of ALL network adapters, firewall and maybe other services? Not sure....
The wireless adapter was managed by process nas. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Router/Version: Netgear R7000
File/Kernel: 06-06-2023-r52894
Previous/Reset: Factory reset before and after flash.
Mode/Status: Running
Issues/Errors: Not sure where to post this but the Switch Config section was set to Disabled and there was configuation of each VLAN ports but when i leave to another tab and back, it stays Disabled but missing configuation of VLAN. Also the SFE and CF option in Basic Setup is nowhere to be found and had to power cycle it to see it.
Guess the other 'issue' I was having with CTF thing is just because i factory reset it and it just need a reboot for them to show up and been showing up ever since. For some reason the router CPU was nearly 0% (according to top command in ssh) when I was doing speedtest reaching 690mbit download (have 600/35 spectrum cable). The old firmware (v3.0 build 44715) was doing around 70% during the same speedtest. Not sure how possible that is but that's amazing.
Router: R7000
Firmware: DD-WRT v3.0
File: R52894
Kernel: Linux 4.4.302-st40 #9537
Previous: R52869
Reset: Before and After Upgrade via Web GUI
Mode: Gateway, AP, Router behind ISP Router
Status: Operational with Wireguard, up time 3:08mins
Issues: Same issue with Switch Screen- did enable then disable
Errors: Speed test seems slow but it could be ISP traffic..will continue testing