Joined: 13 May 2012 Posts: 6 Location: Buenos Aires, Argentina
Posted: Fri Jun 02, 2023 17:58 Post subject: Wireguard for browsing through the local LANs of 3 locations
Hello everyone
In each of 3 different locations I have Linksys E900 routers (3.0 Build 52242 Mega).
I want to be able to enter the local networks of the 3 locations.
Until now, I've been using OpenVPN sharing the same range of IPS 192.168.2.x in all the 3 routers (I only took care that IP's didn't overlap). It worked, but often one or both clients got disconnected from the server for several hours.
That's why now I wanted to try Wireguard.
In one location I configured a router with Wireguard as a server.
In the other two locations, the other 2 routers with Wireguard as clients.
Server:
DD-WRT router IP: 192.168.4.2
Local Lan 192.168.4.x Wireguard IP: 192.168.7.1
Client 1:
DD-WRT router IP: 192.168.3.254
Local Lan 192.168.3.x Wireguard IP: 192.168.7.3
Client 2:
DD-WRT router IP: 192.168.2.254
Local Lan 192.168.2.x Wireguard IP: 192.168.7.2
I've read the guides but I don't understand them completely, and I find them more oriented to connections with commercial servers. I can't find a simple guide for what I want to do: just navigate the internal networks of routers that are in other cities (just like home office, for example).
I configured the server and 1 client, and I see the handshake, but when I try to enter, for example (from a PC in the location of the server) into 192.168.3.254 (the internal IP of the client 1 router), nothing happens.
Here I attached 2 screenshots: one with the server configuration, and another with the client 1 configuration. I would appreciate any advice.
Thanks for your reply! (and for your reply in the spanish thread)
I've just upgraded both server and client 1 routers to version 52869_NEWD-2_K3.x_mega
The situation now is: I can browse the internal LAN of my server (from Client 1), but I cannot browse the local LAN of client 1 from the server side. Any advise?
Joined: 13 May 2012 Posts: 6 Location: Buenos Aires, Argentina
Posted: Wed Jun 07, 2023 21:51 Post subject:
I've carefully read and double-checked the Server guide and the Advanced setup guide, and made some changes in my routers, until it worked!
I attach the settings of the server and one of the clients.