iPhone wi-fi speed TP-Link WR1043NDv3

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Author Message
commodore
DD-WRT User


Joined: 20 Jun 2010
Posts: 158

PostPosted: Thu May 25, 2023 18:37    Post subject: iPhone wi-fi speed TP-Link WR1043NDv3 Reply with quote
TP-Link WR1043NDv3, if I'm not mistaken, is supposed to offer up to 450 Mbit wifi speed. What would then be the reason that an iPhone only gets around 55/55 Mbit (and this even with a direct line of sight between the devices, i.e. the same room). Unless there is something like being too close to the router...
Sponsor
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 13463
Location: Texas, USA

PostPosted: Thu May 25, 2023 18:48    Post subject: Reply with quote
https://wikidevi.wi-cat.ru/TP-LINK_TL-WR1043ND_v3.x
Quote:
WI1 MIMO config: 3x3:3

What model iPhone, or rather, do you know what the iPhone supports (i.e. is it 1x1:1, 2x2:2, or 3x3:3)?
https://support.apple.com/en-gb/guide/deployment/dep268652e6c/web

2.4 band, most likely 20MHz channel width configured on your router...

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
commodore
DD-WRT User


Joined: 20 Jun 2010
Posts: 158

PostPosted: Thu May 25, 2023 19:06    Post subject: Reply with quote
iPhone 13 Pro Max.
The router is 2.4 only, yes; and I have channel width 40 configured.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5896
Location: UK, London, just across the river..

PostPosted: Thu May 25, 2023 20:28    Post subject: Reply with quote
450MBit is only the internal LAN speed, as KP-69 noted you need x3 stream capable client and to get to 450MBit its a theoretical max..that in fact depends how would you test it...try with clients x3 streams to sent/receive locally via WiFi..or wifi x3 steam client (3 antenna) to LAN port client (wired)

Than, many other factors play role..as this is single core CPU it will bottleneck, very likely...
I have 1043v2 same as v3 hardware and never had such a internal speed..and most phones are either single stream or x2 stream capable..

Max wan performance with no SFE is around 150Mbit + with SFE will get faster, but just a bit...and not very wise to use SFE on this router too...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 52459 WAP
TP-Link WR1043NDv2 -DD-WRT 52869 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 52459 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN(no-wifi)
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 52869 Gateway/DoT,AD-Block,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 52459 Gateway/Stubby DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 52869 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum