[blkt]

Welcome to Marvell r52656 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52651 (mirror)

• OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi ~2023 SMB K inadyn lighttpd size L7 AYB FW log no switch SmartDNS Plex SNMP ZFS fix BusyBox VXLAN WG
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[saphirely]

Linksys WRT1900ACS
Firmware: DD-WRT v3.0-r52656 std (05/23/23)
Kernel:Linux 4.9.337 #3827 SMP Tue May 23 02:58:22 +07 2023 armv7l

Works stable with unbound and both WiFi stable.

Upgrade from r52651 in CLI without reset

Thanks a lot.

[ddwrt.guy]

Netgear R7000 - loaded R52656, factory default settings.
Changed IP to 192.168.3.1, set router name, added a 2.4GHx VAP, no password. Applied.
Can not connect to VAP from laptop and from cell. The message is "Can not connect to ssid-vap".
Tried adding a 5GHz vap - same issue.

I had the same experience with R52596.

[Monza]

Router/Version: Linksys WRT1200ac v1
File/Kernel: r52656 Linux 4.9.337 #3827 SMP Tue May 23 02:58:22 +07 2023 armv7l
Previous/Reset: r52651 No reset
Mode/Status: Gateway,VPN, Stable
Issues/Errors: None

[blkt]