Posted: Mon May 22, 2023 8:25 Post subject: New Build - 05/22/2023 - r52651
Welcome to Atheros r52651 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Mon May 22, 2023 9:05 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r52651 std (05/22/23)
Kernel Version Linux 4.9.337 #1916 SMP Mon May 22 02:08:18 +07 2023 armv7l
Upgrade Method HTTPS (Had to bypass site certificate issues) via Web GUI
Previous Build/Reset r52596/NO
Up Time 10 minutes. Logs look good so far.
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Access restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Everything functioning without issue. Thanks BS and team!
Last edited by CR_Apollo on Mon May 22, 2023 9:19; edited 1 time in total
Strangely due to the nature of what I am currently doing:
Code:
-sh: tcpdump: not found
**EDIT** Also now seem to be having IPv4 connection issues (although with the odd setup I currently have it could be that). **IGNORE, I think it was just my random setup, IPv4 now connecting OK).
Failed upgrade. After installing, I had no DNS service on the WAN port and the LAN status page showed no devices. I reverted to r52569 and restored my backup from r52569 after doing a nvram erase. I think this build should be avoided. _________________ Netgear R9000
DD-WRT v3.0-r54248 std (11/29/23)
Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Joined: 16 Nov 2015 Posts: 6177 Location: UK, London, just across the river..
Posted: Mon May 22, 2023 13:33 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r52651 std (05/22/23)
Kernel Version Linux 4.9.337 #1916 SMP Mon May 22 02:08:18 +07 2023 armv7l
update: CLI r52596 > r52651
reset: NO
mode: Gateway
status: Operational 4h+
errors: Nothing new, yet...build its stable, all working as it should...sadly i cant test
ndpi/L7/risk rules as i dont have GUI access... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 53045 WAP
TP-Link WR1043NDv2 -DD-WRT 54248 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 54079 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 54248 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 54079 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 54079 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Mon May 22, 2023 19:29 Post subject:
The Tp-Link TL-WDR3600 v 1.5 working good on this version of firmware. Users that have a problem with devices after update probably made update to this version from some old build to the newest. In my opinion you should update device from one build to the next with step by step method.
The Tp-Link TL-WDR3600 v 1.5 working good on this version of firmware. Users that have a problem with devices after update probably made update to this version from some old build to the newest. In my opinion you should update device from one build to the next with step by step method.
No, just reconfigure manually from scratch on the new build after a proper reset. Also, do not use any old backups.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Tue May 23, 2023 9:21 Post subject:
My device is working good on this version without any operations. Just I'm update it via GUI. Other devices with more custom configuration can have some issues. Today I'm found new build from May 23, 2023. I will test that.
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #172250 Mon May 22 04:39:34 +06 2023 mips
Previous/Reset: r52596 / no
Mode/Status: AP wired and wireless / Up and running for 3:34 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 53544
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 54248
Broadcom
Asus RT-AC87U R - DD-WRT 54248
Asus RT-N66U - DD-WRT 54248
Linksys WRT54GL v1.1 - DD-WRT 54248M
Linksys WRT54GL v1.1 - FreshTomato 2023.3_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
