VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
View previous topic :: View next topic  
Author Message
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2971
Location: Germany
PostPosted: Sun May 14, 2023 8:54    Post subject: VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc) Reply with quote
I have created a thread with several simple example configurations.

The thread is located in the "Advanced Networking" forum, as it is also valid for other routers with 2 CPU ports.

Follow the link: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=334342
Back to top View user's profile Send private message
Sponsor
zdsf
DD-WRT Novice


Joined: 09 Nov 2022
Posts: 20
PostPosted: Tue May 16, 2023 3:42    Post subject: Reply with quote
Thank you for the great guide. In the case of:
"Simple LAN side port VLAN
Port 1-3 are in VLAN1
Port 4 is in VLAN3"

Eth1 was unbridged. Is there a way to remove eth1 interface? having an unbridged interface disables Shortcut Forwarding Engine automatically. Should I delete interface or just simply assign it to a 3rd bridge that will be unused?
Back to top View user's profile Send private message
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2971
Location: Germany
PostPosted: Tue May 16, 2023 6:12    Post subject: Reply with quote
If possible, you should not use SFE at all, since the R7800 is usually fast enough and SFE is a hack that is incompatible with all kinds of services.

Feel free to try bridging eth1 and enabling SFE.
But be aware that it can cause very strange problems.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1283594#1283594

Moderator note 10.25.23: Locked since this post is for information only, not discussion - kp69
_________________
Quickstart guides:
use Pi-Hole as simple DNS-Server with DD-WRT
VLAN configuration via GUI - 1 CPU port
VLAN configuration via GUI - 2 CPU ports (R7800, EA8500 etc)

Routers
Marvell OCTEON TX2 - QHora-322 - OpenWrt 23.05.3 - Gateway
Qualcomm IPQ8065 - R7800 - DD-WRT - WAP
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum