Posted: Thu May 11, 2023 11:50 Post subject: New Build - 05/11/2023 - r52485
Welcome to Atheros r52485 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: TP-Link MR3020 v1
File/Kernel: tl-MR3020-webflash.bin
Previous/Reset: r52459 / no reset
Mode/Status: Station (WISP)
Issues/Errors: Nothing
Works fine.
Big tankhs to those who revived my old TP-Link mr3020 device.
IMHO, the location of some capabilities should be rearranged. For example, one need to go to Status->wireless and select Site Survey to connect to an access point. this could have been placed in the same page of wireless. Activating SSH is another example, there are two seperate places to activate it.
Againg thank you for your hard work.
Last edited by Golpesar on Thu May 11, 2023 13:03; edited 1 time in total
Router/Version: Netgear XR500
Update method:WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1861 SMP Thu May 11 07:56:51 +07 2023 armv7l
Previous/Reset: r52459 / no
Mode/Status: Gateway / Up and running for 1:11 hours
Issues/Errors: Nothing significant
____________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #171310 Thu May 11 13:04:44 +06 2023 mips
Previous/Reset: r52459 / no
Mode/Status: AP wired and wireless / Up and running for 0:45 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus! _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 53544
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 54248
Broadcom
Asus RT-AC87U R - DD-WRT 54475
Asus RT-N66U - DD-WRT 54248
Linksys WRT54GL v1.1 - DD-WRT 54248M
Linksys WRT54GL v1.1 - FreshTomato 2023.3_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Joined: 25 Dec 2020 Posts: 90 Location: Toronto - Canada
Posted: Fri May 12, 2023 4:32 Post subject:
Netgear R7800 Firmware Version DD-WRT v3.0-r52485 std (05/11/23)
Kernel Version Linux 4.9.337 #1861 SMP Thu May 11 07:56:51 +07 2023 armv7l
Upgrade Method HTTPS via Web GUI
Previous Build/Reset r52369/NO
Up Time 1 hour
Configuration Type Gateway
WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.
Everything functioning without issue. Thanks BS and team!
Update: CLI r52095 > r52485
Reset: NO
Mode: Gateway
Status: Operational 1 Hour
WAN Connection Type: PPPoE
Services Used: DHCP Server, DNSMasq, USB Mount, conf-file=/jffs/dnsmasq.custom - Static Leases, IPv4, OVPN Obfuscated Server, 3 x Wireguard Commercial Client VPN's, 1 x VLAN for I-o-T, No Wireless Enabled On This Router - 2 x Wireless Mesh System Attached to LAN & VLAN.
DNS: Unbound Pi-Hole
Errors: Nothing Untoward Showing In Logs
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat May 13, 2023 12:07 Post subject: New Build - 05/11/2023 - r52485
Router/Version: Tp-Link TL-WDR3600 v 1.5
Kernel: Linux 3.10.108-d11 #132553 Thu May 11 11:28:07 +06 2023 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: Nothing significant
Status: Working
Uptime: more than 1 day
All services working good. Performance of device is on acceptable level.
