BROKEN New Build - 05/05/2023 - r52432

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5620

PostPosted: Fri May 05, 2023 10:00    Post subject: BROKEN New Build - 05/05/2023 - r52432 Reply with quote
This build seems broken as in no IPv4 traffic passing from LAN <> WAN

Welcome to Atheros r52432 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52369 (mirror)

OpenVPN 2.6.3: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi ~2023 swconfig Plex mtd overlap inadyn musl N* K xmsn php inadyn Squid vpnc * dep ZFS snort nDPI frr drv
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
Bad blocks handling has been reworked again: R7800, XR450, XR500, IPQ based device w/ defective NAND, boot loops etc.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12770
Location: Netherlands

PostPosted: Fri May 05, 2023 10:05    Post subject: Reply with quote
I did a quick test with my R7800 going from 52411 to 52432.

I had no time to diagnose but internet was not working properly it looked like I only had IPv6 and no IPv4.

I reverted to 52242 the build which was stable for me and had an uptime over 4 weeks.

Maybe it was just my router or whatever but I have no time the coming days to look at it. Sad

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6257
Location: Texas

PostPosted: Fri May 05, 2023 10:23    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r52432 std (05/05/23)
Linux 4.9.337 #1842 SMP Fri May 5 03:38:08 +07 2023 armv7l
GUI install over r52369
up --> 3:10
all good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r52432 std (05/05/23)
Linux 3.18.140-d6 #170824 Fri May 5 07:35:47 +06 2023 mips
GUI install over r52369
WAP + guestNET + OVPN server
up --> 3:17
all good
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6333
Location: UK, London, just across the river..

PostPosted: Fri May 05, 2023 10:27    Post subject: Reply with quote
I had no success with R7800 ... 52411 or (even 52369) > 52432 R7800 went "numb" (no reset)
I had:
GUI and SSh access...
there was correct NTP time
there was wget and curl working...
but no connectivity......

reverted to 52369

I haven't tried reset and manual recompile of 52432 as this is a heavy load unit...no time for it atm sorry..will pass for now

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55009 WAP
TP-Link WR1043NDv2 -DD-WRT 55109 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 55052 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55109 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55052 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55109 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Fri May 05, 2023 10:47; edited 1 time in total
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 408

PostPosted: Fri May 05, 2023 10:30    Post subject: Reply with quote
egc wrote:
I did a quick test with my R7800 going from 52411 to 52432.

I had no time to diagnose but internet was not working properly it looked like I only had IPv6 and no IPv4.

I reverted to 52242 the build which was stable for me and had an uptime over 4 weeks.

Maybe it was just my router or whatever but I have no time the coming days to look at it. Sad


I got the same results on my XR500. Rolling back to 52369......

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
nickant
DD-WRT User


Joined: 09 Feb 2016
Posts: 318

PostPosted: Fri May 05, 2023 10:33    Post subject: Reply with quote
Linksys EA8500
GUI upgrade from r52411, no reset.
Update went sucessfully, but no internet access.
Restarted router, still no internet.
I reverted to r52369 (r52411 was removed) - internet worked again.

_________________
------------------------------------
Netgear XR500 OpenWrt-23.05.2 (Gateway)
Linksys EA8500 OpenWrt-23.05.2 (Wired AP)
Linksys WRT3200ACM DD-WRT r55109 (spare Wired AP)
Netgear WNDR3700v4 DD-WRT r55052 (spare Gateway)
Photos: https://www.flickr.com/photos/nickant44/albums
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6257
Location: Texas

PostPosted: Fri May 05, 2023 11:17    Post subject: Reply with quote
NO problems here Twisted Evil
Code:
mrjcd@Will-Be-Was:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r52432 std (c) 2023 NewMedia-NET GmbH
Release: 05/05/23
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.0 (2023-05-05 03:39:34 +07) built-in shell (ash)

root@Citadel-Station-Homeworld:~# ping dd-wrt.com
PING dd-wrt.com (185.84.6.111): 56 data bytes
64 bytes from 185.84.6.111: seq=0 ttl=52 time=126.938 ms
64 bytes from 185.84.6.111: seq=1 ttl=52 time=127.384 ms
64 bytes from 185.84.6.111: seq=2 ttl=52 time=126.953 ms
64 bytes from 185.84.6.111: seq=3 ttl=52 time=126.625 ms
64 bytes from 185.84.6.111: seq=4 ttl=52 time=127.115 ms
^C
--- dd-wrt.com ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 126.625/127.003/127.384 ms
root@Citadel-Station-Homeworld:~# ps
  PID USER       VSZ STAT COMMAND
    1 root       900 S    /sbin/init
    2 root         0 SW   [kthreadd]
    4 root         0 SW<  [kworker/0:0H]
    6 root         0 SW   [ksoftirqd/0]
    7 root         0 SW   [rcu_sched]
    8 root         0 SW   [rcu_bh]
    9 root         0 SW   [migration/0]
   10 root         0 SW<  [lru-add-drain]
   11 root         0 SW   [cpuhp/0]
   12 root         0 SW   [cpuhp/1]
   13 root         0 SW   [migration/1]
   14 root         0 SW   [ksoftirqd/1]
   15 root         0 SW   [kworker/1:0]
   16 root         0 SW<  [kworker/1:0H]
   17 root         0 SW   [oom_reaper]
   18 root         0 SW<  [writeback]
   19 root         0 SW   [kcompactd0]
   20 root         0 SW<  [crypto]
   21 root         0 SW<  [bioset]
   22 root         0 SW<  [kblockd]
   24 root         0 SW<  [watchdogd]
   26 root         0 SW   [kworker/1:1]
   43 root         0 SW   [kswapd0]
   44 root         0 SW<  [vmstat]
   71 root         0 SW<  [cryptodev_queue]
   72 root         0 SW   [kworker/0:1]
   75 root         0 SW<  [bioset]
   76 root         0 SW<  [bioset]
   77 root         0 SW<  [bioset]
   78 root         0 SW<  [bioset]
   79 root         0 SW<  [bioset]
   80 root         0 SW<  [bioset]
   81 root         0 SW<  [bioset]
   82 root         0 SW<  [bioset]
   83 root         0 SW<  [bioset]
   84 root         0 SW<  [bioset]
   85 root         0 SW<  [bioset]
   86 root         0 SW<  [bioset]
   87 root         0 SW<  [bioset]
   88 root         0 SW<  [bioset]
   89 root         0 SW<  [bioset]
   90 root         0 SW<  [bioset]
   91 root         0 SW<  [bioset]
   92 root         0 SW<  [bioset]
   93 root         0 SW<  [bioset]
   98 root         0 SW<  [kworker/0:1H]
   99 root         0 SW<  [kworker/1:1H]
  784 root       776 S    /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
  788 root       768 S    /sbin/mstpd
  839 root         0 SW<  [cfg80211]
  840 root         0 SW   [kworker/0:2]
  852 root         0 SW<  [ath10k_wq]
  853 root         0 SW<  [ath10k_aux_wq]
  854 root         0 SW<  [ath10k_tx_compl]
  859 root         0 SW<  [ath10k_wq]
  860 root         0 SW<  [ath10k_aux_wq]
  861 root         0 SW<  [ath10k_tx_compl]
  883 root      1220 S    watchdog
 1239 root      4116 S    hostapd -B -P /var/run/wlan1_hostapd.pid /tmp/wlan1_hostap.conf
 1299 root      4224 S    hostapd -B -P /var/run/wlan0_hostapd.pid /tmp/wlan0_hostap.conf
 1484 root      1092 S    dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed25519_key -p 22 -s
 1485 root      1244 S    syslogd -Z -L
 1490 root      1244 S    klogd
 2027 root      4056 S    httpd -n -p 80
 2029 root      1092 S    resetbutton
 2329 root      1296 S    wland
 2379 root      3276 S    /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
 2814 root         0 SW<  [ata_sff]
 2834 root         0 SW   [scsi_eh_0]
 2835 root         0 SW<  [scsi_tmf_0]
 2839 root         0 SW   [scsi_eh_1]
 2840 root         0 SW<  [scsi_tmf_1]
 2841 root         0 SW   [usb-storage]
 2947 root      1244 S    udhcpc -i eth0 -p /var/run/udhcpc.pid -s /tmp/dhcpc -O routes -O msstaticroutes
 3115 root         0 SW<  [bioset]
 3199 root      1884 S    dnsmasq -u root -g root -C /tmp/dnsmasq.conf
 3508 root         0 SW   [jbd2/sda1-8]
 3509 root         0 SW<  [ext4-rsv-conver]
 3601 root       700 S    wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksy
 3606 root       824 S    ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
 3607 root       984 S    ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
 3610 root         0 SW   [ksmbd-lo]
 3612 root         0 SW   [ksmbd-eth0]
 3615 root         0 SW   [ksmbd-br0]
 3618 root         0 SW   [ksmbd-br1]
 3620 root         0 SW   [ksmbd-tun2]
 3670 root       700 S    wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksy
 3896 root       684 S    cron
 3918 root      1056 S    process_monitor
 4836 root         0 SW   [ksmbd-imq0]
 6070 root         0 SW<  [kworker/u5:1]
 6221 root         0 RW   [kworker/u4:0]
 6259 root         0 SW   [kworker/u4:1]
 6260 root         0 SW<  [kworker/u5:0]
 6288 root         0 SW<  [kworker/u5:3]
 6307 root         0 SW   [kworker/u4:2]
 6317 root      1112 R    dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed25519_key -p 22 -s
 6318 root      1248 S    -sh
 6322 root      1252 R    ps
root@Citadel-Station-Homeworld:~# uptime && date
 06:13:13 up  4:01,  load average: 0.00, 0.00, 0.00
Fri May  5 06:13:13 CDT 2023
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@Will-Be-Was:~$

===
EDIT:
This unit is wired directly to on ONT
NO modem mess iffin that means anything to ya
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 934

PostPosted: Fri May 05, 2023 12:21    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r52432) / Linux 4.9.337 #1844 SMP Fri May 5 03:58:57 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52411 std (05/04/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1000

PostPosted: Fri May 05, 2023 13:33    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52369 std (04/20/23)
Previous/Reset: DD-WRT v3.0-r52432 std (05/05/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: FAILED

I tried r52432. It installed and seemed to work but DNS connections began to fail after about 5 minutes. LAN side seemed fine, WAN side unusable. Rolled back to r52369 and all is normal.

_________________
Netgear R9000
DD-WRT v3.0-r55109 std (02/09/24)
Linux 4.9.337 #713 SMP Fri Feb 2 04:37:42 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Fri May 05, 2023 13:56    Post subject: New Build - 05/05/2023 - r52432 Reply with quote
Router: Tp-Link TL-WDR3600 v 1.5
File/Kernel: Official build r52432 for my device
Previous/Reset: r52369 and flash r52432 on it and back to r52369 cause router won't work. I'm not try restore factory defaults. I haven't time to make fresh configuration.
Mode: On this build GUI, SSH, DNS, WAN port can work, internet connections won't working on neither interfaces.
Errors: Internet connections can't work and back to r52369 build.

Yesterday I'm installed build r52411 (actually unavailable). On this build router was worked good. Today after information about erased build from May 4 I'm back to build r52369 and flash r52342. On the newest build internet connections totally can't work. Services working on device, but I can't make any internet connections on my workstations. Wireless connections won't working too. PC can't open internet sources and can't ping external hosts. Router on WAN port correctly establish connections with internet. On ssh I can check this. All network interfaces are up and can ping hosts, traceroute etc. It's some problem with LAN and WIFI connections. For tests I'm totally erase firewall rules and security options on GUI, but it not solve problem. Actually I'm rollback to r52369 build and all features works. I'm attach syslog of r52432 build.
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 316
Location: Florida, USA

PostPosted: Fri May 05, 2023 14:08    Post subject: Reply with quote
Router:Linksys ea8500 AP

Upgraded yesterday to r52411 before it was pulled and it was working. Upgraded today to r52432 and was unable to hit any sites. After several reboots I gave up and went back to r52330 where I been for 20 days on all (3) ea8500s with no reboots or problems. Thanks for the effort, but try again.

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6257
Location: Texas

PostPosted: Fri May 05, 2023 14:33    Post subject: Reply with quote
Just found out can't go anywhere connected to other ea8500 ovpn server or the wndr3700v4 ovpn server
Works really great connected to main ea8500 ovpn server.
I'll have closer looksee when get back to homeworld 🙃
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6257
Location: Texas

PostPosted: Fri May 05, 2023 16:48    Post subject: Reply with quote
some weird juju Rolling Eyes
WNDR3700v4 WAP:
its OVPN server can't get any DNS
wireless clients connected to its guest net br1 2.4 VAP connect fine but get NO DNS
install r52369 back and all good again...
other EA8500 can't get DNS connected to its OVPN server ...booted back into r52369 all is good now.
----****----****----****----
main gateway EA8500 still on r52432
all her goodies worky just great Razz
Code:
mrjcd@daDeb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r52432 std (c) 2023 NewMedia-NET GmbH
Release: 05/05/23
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.0 (2023-05-05 03:39:34 +07) built-in shell (ash)

root@Citadel-Station-Homeworld:~# ifconfig
br0       Link encap:Ethernet  HWaddr 14:91:82:7D:EF:7D 
          inet addr:10.72.28.13  Bcast:10.72.28.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1055581 errors:0 dropped:3444 overruns:0 frame:0
          TX packets:2044996 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:128097267 (122.1 MiB)  TX bytes:2755250936 (2.5 GiB)

br1       Link encap:Ethernet  HWaddr 14:91:82:7D:EF:7D 
          inet addr:10.15.26.225  Bcast:10.15.26.255  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:26775 :roll: 5 errors:0 dropped:1688 overruns:0 frame:0
          TX packets:872527 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:26506218 (25.2 MiB)  TX bytes:1237636248 (1.1 GiB)

eth0      Link encap:Ethernet  HWaddr 00:13:xx:xx:xx:xx 
          inet addr:96.46.208.155  Bcast:96.46.208.159  Mask:255.255.255.224
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:3011113 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1372213 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4050495712 (3.7 GiB)  TX bytes:232928000 (222.1 MiB)
          Interrupt:101

eth1      Link encap:Ethernet  HWaddr 14:91:82:7D:EF:7D 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:521276 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1415026 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:95055228 (90.6 MiB)  TX bytes:1885267112 (1.7 GiB)
          Interrupt:102

eth1.4    Link encap:Ethernet  HWaddr 14:91:82:7D:EF:7D 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:175039 errors:0 dropped:0 overruns:0 frame:0
          TX packets:833915 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:11033398 (10.5 MiB)  TX bytes:1213403138 (1.1 GiB)

imq0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 
          UP RUNNING NOARP  MTU:1500  Metric:1
          RX packets:2939657 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2939876 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:30
          RX bytes:3991091908 (3.7 GiB)  TX bytes:3991012943 (3.7 GiB)

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING MULTICAST  MTU:65536  Metric:1
          RX packets:142 errors:0 dropped:0 overruns:0 frame:0
          TX packets:142 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1
          RX bytes:15983 (15.6 KiB)  TX bytes:15983 (15.6 KiB)

tun2      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 
          inet addr:10.172.128.241  P-t-P:10.172.128.241  Mask:255.255.255.240
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:22937 errors:0 dropped:0 overruns:0 frame:0
          TX packets:36364 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:500
          RX bytes:7644236 (7.2 MiB)  TX bytes:43878637 (41.8 MiB)

wlan0     Link encap:Ethernet  HWaddr 14:91:82:7D:EF:7F 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:765414 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1505254 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:132402687 (126.2 MiB)  TX bytes:2145376863 (1.9 GiB)

wlan0.1   Link encap:Ethernet  HWaddr 6A:1E:96:BE:00:00 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:550037 errors:0 dropped:0 overruns:0 frame:0
          TX packets:555755 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:517496371 (493.5 MiB)  TX bytes:544576764 (519.3 MiB)

wlan1     Link encap:Ethernet  HWaddr 14:91:82:7D:EF:80 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:283548 errors:0 dropped:0 overruns:0 frame:0
          TX packets:313879 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:259964683 (247.9 MiB)  TX bytes:310758937 (296.3 MiB)

wlan1.1   Link encap:Ethernet  HWaddr 16:91:82:7D:EF:80 
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:158 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30539 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:22803 (22.2 KiB)  TX bytes:4850090 (4.6 MiB)

root@Citadel-Station-Homeworld:~# uptime
 11:44:26 up  9:32,  load average: 0.08, 0.08, 0.02
root@Citadel-Station-Homeworld:~# date
Fri May  5 11:44:28 CDT 2023
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@daDeb:~$
Puppetnation
DD-WRT Novice


Joined: 13 Aug 2010
Posts: 38
Location: Italy

PostPosted: Fri May 05, 2023 19:55    Post subject: Reply with quote
Update method: GUI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52411 std (05/04/23)
Previous/Reset: DD-WRT v3.0-r52432 std (05/05/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: FAILED

Even with R9000 (aka X10) cannot surf.
Reverted to yesterday's r52411 (which has been removed from server) but seems quite stable

_________________
Netgear R9000+Draytek 2865 as bridge modem
MikroTik hAP AC as backup or portable
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6257
Location: Texas

PostPosted: Fri May 05, 2023 23:08    Post subject: Reply with quote
Razz she's all still good Twisted Evil
forgot you can't put a full dmesg in this crazy..so..shortened a bit
Code:
mrjcd@daDeb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r52432 std (c) 2023 NewMedia-NET GmbH
Release: 05/05/23
Board: Linksys EA8500
==========================================================
 
     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/
                                                     
                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.0 (2023-05-05 03:39:34 +07) built-in shell (ash)

root@Citadel-Station-Homeworld:~# dmesg | tail -80
[   52.726636] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   52.726718] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[   52.731282] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   52.738669] xhci-hcd xhci-hcd.0.auto: irq 202, io mem 0x11000000
[   52.749551] hub 1-0:1.0: USB hub found
[   52.755278] hub 1-0:1.0: 1 port detected
[   52.757814] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   52.761249] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[   52.766539] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   52.774730] hub 2-0:1.0: USB hub found
[   52.782932] hub 2-0:1.0: 1 port detected
[   52.786255] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   52.790080] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[   52.790230] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[   52.790251] xhci-hcd xhci-hcd.1.auto: irq 203, io mem 0x10000000
[   52.803375] hub 3-0:1.0: USB hub found
[   52.803408] hub 3-0:1.0: 1 port detected
[   52.803690] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[   52.803709] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[   52.804096] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   52.807576] hub 4-0:1.0: USB hub found
[   52.808661] hub 4-0:1.0: 1 port detected
[   52.908956] SCSI subsystem initialized
[   53.021628] usbcore: registered new interface driver usb-storage
[   53.084448] libata version 3.00 loaded.
[   53.148086] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[   53.150840] ahci 29000000.sata: forcing port_map 0x0 -> 0x1
[   53.153586] ahci 29000000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[   53.153595] ahci 29000000.sata: flags: ncq sntf pm led clo only pmp pio slum part ccc apst
[   53.155000] scsi host0: ahci
[   53.155214] ata1: SATA max UDMA/133 mmio [mem 0x29000000-0x2900017f] port 0x100 irq 95
[   53.181007] usb-storage 2-1:1.0: USB Mass Storage device detected
[   53.186898] scsi host1: usb-storage 2-1:1.0
[   53.487890] ata1: SATA link down (SStatus 0 SControl 300)
[   53.688235] sdhci: Secure Digital Host Controller Interface driver
[   53.688258] sdhci: Copyright(c) Pierre Ossman
[   53.735222] sdhci-pltfm: SDHCI platform and OF driver helper
[   54.158194] IMQ driver unloaded successfully.
[   54.385988] br1: port 3(eth1.4) entered blocking state
[   54.386011] br1: port 3(eth1.4) entered disabled state
[   54.390369] device eth1.4 entered promiscuous mode
[   54.400576] br1: port 3(eth1.4) entered blocking state
[   54.474178] scsi 1:0:0:0: Direct-Access     Samsung  Flash Drive      1100 PQ: 0 ANSI: 6
[   54.475631] sd 1:0:0:0: [sda] 62656641 512-byte logical blocks: (32.1 GB/29.9 GiB)
[   54.481800] sd 1:0:0:0: [sda] Write Protect is off
[   54.488830] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00
[   54.489709] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   55.991927]  sda: sda1
[   55.994301] sd 1:0:0:0: [sda] Attached SCSI removable disk
[   56.103220] ksmbd: kill command received
[   56.915682] EXT4-fs (sda1): Ignoring removed nobh option
[   56.918149] EXT4-fs (sda1): barriers disabled
[   57.332261] EXT4-fs (sda1): recovery complete
[   57.332687] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[   57.663139] br1: port 1(wlan1.1) entered learning state
[   57.727431] Linux kernel CIFS/SMB SERVER 3.4.6 by Namjae Jeon <linkinjeon@kernel.org>
[   59.040205] IMQ: use 2 as queue number
[   59.085868] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[   59.085895]    Hooking IMQ after NAT on PREROUTING.
[   59.094141]    Hooking IMQ before NAT on POSTROUTING.
[   61.208227] IMQ driver unloaded successfully.
[   61.663149] br1: port 2(wlan0.1) entered learning state
[   63.522730] IMQ: use 2 as queue number
[   63.569052] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[   63.569079]    Hooking IMQ after NAT on PREROUTING.
[   63.577272]    Hooking IMQ before NAT on POSTROUTING.
[   72.663795] br1: port 1(wlan1.1) entered forwarding state
[   73.664106] br1: port 3(eth1.4) entered learning state
[   76.663706] br1: port 2(wlan0.1) entered forwarding state
[   88.663204] br1: port 3(eth1.4) entered forwarding state
[39176.618206] IMQ driver unloaded successfully.
[39179.103112] IMQ: use 2 as queue number
[39179.116028] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[39179.116060]    Hooking IMQ after NAT on PREROUTING.
[39179.124320]    Hooking IMQ before NAT on POSTROUTING.
[39390.158236] IMQ driver unloaded successfully.
[39392.745827] IMQ: use 2 as queue number
[39392.758559] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[39392.758586]    Hooking IMQ after NAT on PREROUTING.
[39392.766758]    Hooking IMQ before NAT on POSTROUTING.
root@Citadel-Station-Homeworld:~# uptime && date
 18:10:10 up 15:58,  load average: 0.06, 0.05, 0.06
Fri May  5 18:10:10 CDT 2023
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@daDeb:~$
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum