New Build - 04/20/2023 - r52369

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5
Author Message
el-guapin
DD-WRT Novice


Joined: 25 Aug 2019
Posts: 23

PostPosted: Sun Apr 30, 2023 17:25    Post subject: Reply with quote
ho1Aetoo wrote:
As I said I have tested this several times with the regulatory domain US and the channel 161+LL with both radio firmware versions and also with a router restart.

With me the problem does not occur, it always shows me all channels up to 161.

Have you cleared the browser cache? (CTRL+F5)
and tested another browser without plugins ?


Thank You for checking this out for me. I just cleared cache on browser(FF) and disable all plugins. no change. I also checked on Edge and Safari. No change. Weird!

_________________
Netgear R7800 AP
Netgear R7800 WAP

miniDLNA 500+ HD movies
QOS Disable
ATT Fiber Internet 500

Sponsor
gilius
DD-WRT Novice


Joined: 18 Oct 2022
Posts: 20

PostPosted: Thu May 04, 2023 4:01    Post subject: Reply with quote
With Spanning Tree Protocol deactivated in the gui, why does mstpd continue running no matter what?


Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node PID/Program name Path
unix 10 [ ] DGRAM 3399 943/syslogd /dev/log
unix 2 [ ] DGRAM 605 793/hostapd /var/run/hostapd/wlan1
unix 2 [ ] DGRAM 252 508/mstpd @.mstp_server@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
unix 2 [ ACC ] STREAM LISTENING 4850 1699/openvpn /dev/openvpn
unix 2 [ ] DGRAM 250 508/mstpd
unix 2 [ ] DGRAM 6235 2132/cron
unix 2 [ ] DGRAM 7406 2153/process_monito
unix 2 [ ] DGRAM 4525 1373/httpd
unix 2 [ ] DGRAM 2478 1/init
unix 2 [ ] DGRAM 3402 945/klogd
unix 2 [ ] DGRAM 7861 1348/ttraff
unix 2 [ ] DGRAM 607 793/hostapd
unix 2 [ ] DGRAM 5832 1699/openvpn
unix 2 [ ] DGRAM 4843 1690/dnsmasq
unix 2 [ ] DGRAM 1023 979/dropbear


Also, mstpd is not shown anywhere in the list of services.


List of services:
3g [stop]
bonding [start] [stop] [restart] (emulated)
bootprimary [start]
bootsecondary [start]
bridgesif [start] [stop] [restart] (emulated)
bridging [start] [stop] [restart] (emulated)
check_qmi [start]
check_sierradirectip [start]
check_sierrappp [start]
checkhostapd [start]
chilli [start] [stop] [restart] (native)
config_vlan [start]
configurewifi [start]
conntrack [start] [stop] [restart] (emulated)
cron [start] [stop] [restart] (emulated)
ddns [start] [stop] [restart] (emulated)
deconfigurewifi [start]
defaults [start]
devinit [start]
devinit_arch [start]
dhcp6c [start] [stop] [restart] (emulated)
dhcp6s [start] [stop] [restart] (emulated)
dhcpc [stop]
dhcpfwd [start] [stop] [restart] (emulated)
dlna [start] [stop] [restart] (emulated)
dlna_rescan [start]
dns_clear_resolv [start] [stop] [restart] (emulated)
dnsmasq [start] [stop] [restart] (native)
drivers [start] [stop] [restart] (emulated)
drivers_net [start]
duallink [start]
dumprom [start]
finishupgrade [start]
firewall [start] [stop] [restart] (emulated)
force_to_dial [start] [stop] [restart] (emulated)
freeradius [start] [stop] [restart] (native)
ftpsrv [start] [stop] [restart] (native)
gen_radius_cert [start] [stop] [restart] (emulated)
heartbeat_boot [start] [stop] [restart] (emulated)
heartbeat_redial [start] [stop] [restart] (emulated)
heartbeat [stop]
hostapdwan [start]
hostname [start]
hotplug_block [start] [stop] [restart] (emulated)
hotplug_net [start] [stop] [restart] (emulated)
hotplug_usb [start]
httpd [start] [stop] [restart] (emulated)
hwmon [start] [stop] [restart] (emulated)
igmprt [start] [stop] [restart] (emulated)
init_restart [start]
init_start [start]
init_stop [start]
iptqueue [start] [stop] [restart] (emulated)
ipv6 [start] [stop] [restart] (emulated)
ipvs [start] [stop] [restart] (emulated)
jffs2 [start] [stop] [restart] (emulated)
l2tp_boot [start]
l2tp_redial [start]
l2tp [stop]
lan [start] [stop] [restart] (emulated)
lighttpd [start] [stop] [restart] (emulated)
loadfwmodules [start]
mactelnetd [start] [stop] [restart] (emulated)
mdns [start] [stop] [restart] (native)
mkfiles [start]
modules [start] [stop] [restart] (emulated)
modules_wait [start]
nfs [start] [stop] [restart] (emulated)
notifier [start] [stop] [restart] (emulated)
nstxd [start] [stop] [restart] (emulated)
ntpc [stop]
nvram [start]
olsrd [start] [stop] [restart] (emulated)
openvpn [start] [stop] [restart] (emulated)
openvpnserver [start] [stop] [restart] (emulated)
openvpnserversys [start] [stop] [restart] (emulated)
openvpnserverwan [start] [stop] [restart] (emulated)
openvpn_wandone [stop]
overclocking [start]
post_sysinit [start]
postnetwork [start]
pppmodules [start] [stop] [restart] (emulated)
pppoerelay [start] [stop] [restart] (emulated)
pppoeserver [start] [stop] [restart] (emulated)
pppoe [stop]
pppoe_dual [stop]
pptpd [start] [stop] [restart] (emulated)
pptp [stop]
printer [start] [stop] [restart] (emulated)
privoxy [start] [stop] [restart] (emulated)
process_monitor [start] [stop] [restart] (emulated)
qos [start] [stop] [restart] (emulated)
quagga_writememory [start]
radio_off [start] [stop] [restart] (emulated)
radio_off_0 [start] [stop] [restart] (emulated)
radio_off_1 [start] [stop] [restart] (emulated)
radio_off_2 [start] [stop] [restart] (emulated)
radio_on [start] [stop] [restart] (emulated)
radio_on_0 [start] [stop] [restart] (emulated)
radio_on_1 [start] [stop] [restart] (emulated)
radio_on_2 [start] [stop] [restart] (emulated)
radio_timer [start] [stop] [restart] (emulated)
radvd [start] [stop] [restart] (native)
raid [start] [stop] [restart] (emulated)
redial [start] [stop] [restart] (emulated)
resetbutton [start] [stop] [restart] (emulated)
resetleds [start]
restarthostapd [start]
restarthostapd_ifneeded [start]
restore_defaults [start]
run_rc_shutdown [start] [stop] [restart] (emulated)
run_rc_startup [start] [stop] [restart] (emulated)
run_rc_usb [start] [stop] [restart] (emulated)
samba3 [start] [stop] [restart] (native)
ses_led_control [start]
set_routes [start]
setup_vlans [start]
sfe [start] [stop] [restart] (emulated)
smartd [start] [stop] [restart] (emulated)
smartdns [start] [stop] [restart] (emulated)
snmp [start] [stop] [restart] (native)
softether [start] [stop] [restart] (emulated)
speedchecker [start] [stop] [restart] (emulated)
speedchecker_init [start]
splashd [start] [stop] [restart] (emulated)
sshd [start] [stop] [restart] (emulated)
stabridge [start] [stop] [restart] (emulated)
sysctl_cleanup [start]
sysctl_config [start]
sysinit [start]
syslog [start] [stop] [restart] (emulated)
telnetd [start] [stop] [restart] (emulated)
tor [start] [stop] [restart] (native)
transmission [start] [stop] [restart] (emulated)
ttraff [start] [stop] [restart] (emulated)
unbound [start] [stop] [restart] (native)
upnp [start] [stop] [restart] (emulated)
vifs [start] [stop] [restart] (emulated)
vlantagging [start] [stop] [restart] (emulated)
vncrepeater [start] [stop] [restart] (emulated)
vpn_modules [start] [stop] [restart] (emulated)
wan_boot [start]
wan_redial [start]
wan_service [start]
wanup [start]
wan [stop]
watchdog [start] [stop] [restart] (emulated)
wifidog [start] [stop] [restart] (emulated)
wland [start] [stop] [restart] (emulated)
wlconf [start] [stop] [restart] (emulated)
wol [start] [stop] [restart] (emulated)
zabbix [start] [stop] [restart] (emulated)
zebra [start] [stop] [restart] (emulated)

List of main routines:
addpppoeconnected [main]
addpppoetime [main]
beep [main]
checkwanip [main]
ddns_success [main]
delpppoeconnected [main]
dhcp6c_state [main]
dhcpc [main]
dhcpc_tv [main]
disconnected_pppoe [main]
restart_dns [main]
filter [main]
filtersync [main]
fscheck [main]
get_nfmark [main]
get_wanface [main]
get_wanip [main]
getbridge [main]
getipmask [main]
getmask [main]
gpio [main]
hb_connect [main]
hb_disconnect [main]
ipdown [main]
ipfmt [main]
ipup [main]
ledtracking [main]
mesh_params [main]
pptpd [main]
setpasswd [main]
setportprio [main]
setuserpasswd [main]
site_survey [main]
supplicant [main]
vhtcaps [main]
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Thu May 04, 2023 10:59    Post subject: New Build - 04/20/2023 - r52369 Reply with quote
Router: Tp-Link TL-WDR3600 v 1.5
Kernel: Linux 3.10.108-d11 #131066 Thu Apr 20 02:46:49 +06 2023 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: some yellow marked events in logs. It's nothing significant
Status: Working
Uptime: almost 14 days

Device working good. I don't see any significant problems. All services is still up.
CR_Apollo
DD-WRT User


Joined: 25 Dec 2020
Posts: 90
Location: Toronto - Canada

PostPosted: Sun May 07, 2023 9:27    Post subject: Reply with quote
Netgear R7800
Firmware Version DD-WRT v3.0-r52369 std (04/20/23)
Kernel Version Linux 4.9.337 #1812 SMP Thu Apr 20 00:46:29 +07 2023 armv7l
Upgrade Method HTTPS via Web GUI
Previous Build/Reset r52242/YES
Up Time 1 hour

Configuration Type Gateway

WAN DHCP. LAN/wlan0 5Ghz vanilla VHT80+80 br0 with AP Mesh attached. Wlan0.1 Isolated AP Isolated network with FW rule(s) to wlan1 resource(s). Wlan1 2.4Ghz Vanilla 20/40 without Masquerade/NAT. Wlan1.1 Isolated AP and Isolated network. All clients with static leases x4 DHCP. MAC Filtering. Time restrictions. Ignore WAN DNS with static DNS servers, DNSMASQ, cached DNSSEC, Validate DNSSEC replies, no DNS rebind, Query DNS strict order. WPA 3 and WPA 2. Syslogd to FS on br0 LAN. Cooling fan USB attached. WAN traffic counter.

Everything functioning without issue so far after doing a clean setup. Really like the new commands layout. Great work! Thanks BS and team!
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6350
Location: UK, London, just across the river..

PostPosted: Sun May 07, 2023 15:24    Post subject: Reply with quote
gilius wrote:
With Spanning Tree Protocol deactivated in the gui, why does mstpd continue running no matter what?


Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node PID/Program name Path
unix 10 [ ] DGRAM 3399 943/syslogd /dev/log
unix 2 [ ] DGRAM 605 793/hostapd /var/run/hostapd/wlan1
unix 2 [ ] DGRAM 252 508/mstpd @.mstp_server@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
unix 2 [ ACC ] STREAM LISTENING 4850 1699/openvpn /dev/openvpn
unix 2 [ ] DGRAM 250 508/mstpd
unix 2 [ ] DGRAM 6235 2132/cron
unix 2 [ ] DGRAM 7406 2153/process_monito
unix 2 [ ] DGRAM 4525 1373/httpd
unix 2 [ ] DGRAM 2478 1/init
unix 2 [ ] DGRAM 3402 945/klogd
unix 2 [ ] DGRAM 7861 1348/ttraff
unix 2 [ ] DGRAM 607 793/hostapd
unix 2 [ ] DGRAM 5832 1699/openvpn
unix 2 [ ] DGRAM 4843 1690/dnsmasq
unix 2 [ ] DGRAM 1023 979/dropbear


yes indeed i can see it as an output of netstat -npla
but this doesn't mean its running..or doing something..
There is only nvram value for lan_stp=0 as STP should be only running inside the local network...

i do have those few in my boot syslog in relation with mstpd
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 12
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 12

you can always probe your router wan or lan side with wireshark and find if there are any STP messages running...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55179 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55179 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55109 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
gilius
DD-WRT Novice


Joined: 18 Oct 2022
Posts: 20

PostPosted: Mon May 22, 2023 4:54    Post subject: Reply with quote
Alozaros wrote:


yes indeed i can see it as an output of netstat -npla
but this doesn't mean its running..or doing something..
There is only nvram value for lan_stp=0 as STP should be only running inside the local network...

i do have those few in my boot syslog in relation with mstpd
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 12
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 12

you can always probe your router wan or lan side with wireshark and find if there are any STP messages running...


There's four problems as I see it; 1) STP is deactivated 2) mstpd is still running anyway 3) it's a server 4) There is no mention of it in the standard services anywhere. Therefore my approach to this is to kill it on startup.

I still would like to know why it is running.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6350
Location: UK, London, just across the river..

PostPosted: Mon May 22, 2023 6:16    Post subject: Reply with quote
gilius wrote:
Alozaros wrote:


yes indeed i can see it as an output of netstat -npla
but this doesn't mean its running..or doing something..
There is only nvram value for lan_stp=0 as STP should be only running inside the local network...

i do have those few in my boot syslog in relation with mstpd
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 12
Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 12

you can always probe your router wan or lan side with wireshark and find if there are any STP messages running...


There's four problems as I see it; 1) STP is deactivated 2) mstpd is still running anyway 3) it's a server 4) There is no mention of it in the standard services anywhere. Therefore my approach to this is to kill it on startup.

I still would like to know why it is running.


it went too off topic..but...

Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 12

you get this error because the bridge you have made will come a bit later..in the boot...but on this check its not there yet...
i can only guess mstpd its been used for managing br configs/communication...or you can ask BS.. Rolling Eyes

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall
TP-Link WR1043NDv2 -DD-WRT 55179 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 55179 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55179 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55109 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
gilius
DD-WRT Novice


Joined: 18 Oct 2022
Posts: 20

PostPosted: Mon May 22, 2023 23:56    Post subject: Reply with quote
Alozaros wrote:


it went too off topic..but...

Jan 1 02:00:10 daemon.info mstpd[739]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 12

you get this error because the bridge you have made will come a bit later..in the boot...but on this check its not there yet...
i can only guess mstpd its been used for managing br configs/communication...or you can ask BS.. Rolling Eyes


Maybe he will chime in on this. You might be interested to know that with mstpd killed on startup commands, it has no discernible effect on the router. I am not surprised at this because with builds last year, it was not there. It's only recently that I have seen it reported by netstat. (this year)
Goto page Previous  1, 2, 3, 4, 5 Display posts from previous:    Page 5 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum