New Build - 03/28/2023 - r52189

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page Previous  1, 2, 3
View previous topic :: View next topic  
Author Message
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504
PostPosted: Sun Apr 02, 2023 18:01    Post subject: Reply with quote
Code:
Using username "root".
Pre-authentication banner message from server:
| DD-WRT v3.0-r52217 std (c) 2023 NewMedia-NET GmbH
| Release: 04/02/23
| Board: Linksys WRT1900ACS v2
==========================================================

     ___  ___     _      _____  ______       ____  ___
    / _ \/ _ \___| | /| / / _ \/_  __/ _  __|_  / / _ \
   / // / // /___/ |/ |/ / , _/ / /   | |/ //_ <_/ // /
  /____/____/    |__/|__/_/|_| /_/    |___/____(_)___/

                       DD-WRT v3.0
                   https://www.dd-wrt.com


==========================================================


BusyBox v1.36.0 (2023-04-02 03:36:40 +07) built-in shell (ash)

root@DD-WRT:~#
root@DD-WRT:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x004e: (0) 1 2 3 6
        qmode: 0
        pvid: 0
        link: port:0 link:down
Port 1:
        mask: 0x004d: 0 (1) 2 3 6
        qmode: 0
        pvid: 0
        link: port:1 link:down
Port 2:
        mask: 0x004b: 0 1 (2) 3 6
        qmode: 0
        pvid: 0
        link: port:2 link:down
Port 3:
        mask: 0x0047: 0 1 2 (3) 6
        qmode: 0
        pvid: 0
        link: port:3 link:up speed:1000baseT full-duplex
Port 4:
        mask: 0x0020: (4) 5
        qmode: 0
        pvid: 0
        link: port:4 link:up speed:1000baseT full-duplex
Port 5:
        mask: 0x0010: 4 (5)
        qmode: 0
        pvid: 0
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x000f: 0 1 2 3 (6)
        qmode: 0
        pvid: 0
        link: port:6 link:up speed:1000baseT full-duplex
root@DD-WRT:~#





Code:
BusyBox v1.36.0 (2023-04-02 03:36:40 +07) built-in shell (ash)

root@DD-WRT:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x0000: (0)
        qmode: 3
        pvid: 1
        link: port:0 link:down
Port 1:
        mask: 0x0000: (1)
        qmode: 3
        pvid: 1
        link: port:1 link:down
Port 2:
        mask: 0x0000: (2)
        qmode: 3
        pvid: 1
        link: port:2 link:down
Port 3:
        mask: 0x0000: (3)
        qmode: 3
        pvid: 1
        link: port:3 link:up speed:1000baseT full-duplex
Port 4:
        mask: 0x0000: (4)
        qmode: 3
        pvid: 2
        link: port:4 link:up speed:1000baseT full-duplex
Port 5:
        mask: 0x0000: (5)
        qmode: 3
        pvid: 2
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x0000: (6)
        qmode: 3
        pvid: 1
        link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
        port_based: 0
        vid: 1
        ports: 0 1 2 3 6
VLAN 2:
        port_based: 0
        vid: 2
        ports: 4 5


no internet in the last one!
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Back to top View user's profile Send private message
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700
PostPosted: Mon Apr 03, 2023 5:15    Post subject: Reply with quote
oliver44 wrote:
no internet in the last one!
Will need to wait for the next one as ho1Aetoo said to test Switch Config tab again with build greater than r52221.
After a few fixes is work in progress on drivers for Marvell switch hardware, to add missing functions and features.

IEEE 802.1Q Dynamic VLANs Supported = 4096 for 88E6172, 88E6176, 88E6352 from datasheet or pdf brochure.
Unsure the switch limitations, especially 1200 and 1900 series, but r52220 and r52221 is 88E61xx port mirroring.
Back to top View user's profile Send private message
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504
PostPosted: Mon Apr 03, 2023 7:21    Post subject: Reply with quote
blkt wrote:
oliver44 wrote:
no internet in the last one!
Will need to wait for the next one as ho1Aetoo said to test Switch Config tab again with build greater than r52221.
After a few fixes is work in progress on drivers for Marvell switch hardware, to add missing functions and features.

IEEE 802.1Q Dynamic VLANs Supported = 4096 for 88E6172, 88E6176, 88E6352 from datasheet or pdf brochure.
Unsure the switch limitations, especially 1200 and 1900 series, but r52220 and r52221 is 88E61xx port mirroring.



This problem is also reflected in the problem after the update, more precisely, the router does not know how to reboot correctly?
does it somehow also affect the wifi part of losing the connection suddenly and coming back after two minutes?
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Back to top View user's profile Send private message
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504
PostPosted: Mon Apr 03, 2023 7:25    Post subject: Reply with quote
I am currently on Openwrt, everything went normally after the update and the wifi part seems more stable, I will return to ddwrt when you publish the new version, at the moment I am testing to see where the problem is, but it seems that the last 5 updates affect dd-wrt, it no longer comes back correctly after the update...

openwrt update OpenWrt SNAPSHOT r22463-3c3d797c4d
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Back to top View user's profile Send private message
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 3002
Location: Germany
PostPosted: Mon Apr 03, 2023 7:32    Post subject: Reply with quote
@oliver44

You are posting in the wrong thread, the thread title is "Build r52189" not "Build r52217" also not "openwrt".
Back to top View user's profile Send private message
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504
PostPosted: Mon Apr 03, 2023 7:56    Post subject: Reply with quote
ho1Aetoo wrote:
@oliver44

You are posting in the wrong thread, the thread title is "Build r52189" not "Build r52217" also not "openwrt".


I just checked if it's a hardware problem, I just made a comparison...!
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Back to top View user's profile Send private message
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum