[nyddwrtuser330]

R9000
Webui update from 52148
Services: WDS AP 5Ghz, DNsmasq, Dhcp, Smb, inadyn, QOS, Guest network VAP, Vanilla, United Stated domain, 149 UU
Errors: None

router 2 r7800
WDS STA, 5 GHz VAP, 2.4 GHz VAP
error: reverted back to 51589 ticket #7669, i need to use non-DFS and 149 was cleanest

[dpp3530]

Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23)
Previous/Reset: DD-WRT v3.0-r52148 std (03/26/23), no reset this time.
Mode/Status: 2 devices, Wired access points (DD-WRT firmware, AC/N mixed, VHT80)
Issues/Errors:
Flashed using GUI on Firefox 111.01. I was previously using Vanilla firmware as my wife has an older laptop with a QCA61x4 chipset (that Lenovo won't let you upgrade). With DD-WRT firmware, it would randomly drop connections briefly or refuse to connect on wakeup, which wasn't the case with Vanilla.

With the improvements mentioned in this and the last build, I switched both devices to DD-WRT, rebooted them, and even her touchy laptop seems to be happy. Uptime is just under 2 days and not one random disconnect or wakeup issue.

[user28]

Router/Version: TP-Link Archer A7 V5
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23)
Previous/Reset: Flashed over the TP-Link factory firmware and factory reset after flashing
Mode/Status: 2 devices on 5GHz band, 6 devices on 2.4 GHz band and one desktop connected to ethernet 1
Issues/Errors:
No errors difficulties in flashing.

Observations:

1. Immediately after flashing and rebooting (factory to dd-wrt), the WAN led stayed orange, ethernet led 3 and 4 stayed on though nothing is connected to those ports

2. WPS led stays on/lit always [the one with the up / down arrow (can it be disabled?)

3. Even after upgrading the latest build, reboot and reset to defaults, WPS led stays on. My desktop is connected to ethernet 1 and nothing is connected to ports 2,3,4. But whenever ethernet port 1 is active, led of ports 3 and 4 are also lit up.

[user28]

More observations:

If ethernet port 1 is active, led of port 3 and 4 are on and stay on even after ethernet port 1 is disconnected. After some time, 2 4 GHz radio stops responding and does not connect. This is happening only if ethernet port is active or something is connected to ethernet ports.

[jbkt23]

tplink ArcherC7v5
03/28/2023
Installed DD-WRT v3.0-r52189 std (03/28/23)
Kernel Ver Linux 3.18.140-d6 #167765 Tue Mar 28 05:59:50 +06 2023 mips
Via CLI, No Reset

Prior version r51887

Used as AP/Gateway
5g Vanilla
2.4g DD-WRT
dhcp, dnsmasq, dns, unbridged guest vlans

Issues unknown
Up 4days+

[mac913]

Home Main Gateway Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23)
Kernel Version: Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: r52054 -> r52148 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx via Startup,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6,VLAN GUI


Home Main AP Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23)
Kernel Version: Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: ]r52054 -> r52148 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx via Startup,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba,VLAN GUI

Fixed: 5Ghz LED is Working since r51887!

Both running for over 65 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

[neosimago]

Linksys EA8500 ...local router, WiFi 5Gh/2Gh, smb, usb disk, optware
DD-WRT v3.0-r52189 std (03/28/23)
Linux 4.9.337 #1739 SMP Tue Mar 28 02:02:03 +07 2023 armv7l
GUI install over r52054
all good Smile

[mrjcd]

[tsenov]

Router/Version: TP-Link ARCHER-C7 v5
File/Kernel: Linux 3.18.140-d6 #167765 Tue Mar 28 05:59:50 +06 2023 mips
Previous/Reset: r37961 / Yes (Before flashing)
Mode/Status: Router / Working (42 min up)
Issues/Errors: LAN ports 3 and 4 light up constantly

Thanks!

[tsenov]

Router/Version: TP-Link TL-WR940ND v6 (EU)
File/Kernel: Linux 3.18.140-d6 #167745 Tue Mar 28 05:25:52 +06 2023 mips
Previous/Reset: r37012 / NO
Mode/Status: WDS Station / Working
Issues/Errors: None so far

Update via web GUI.

Thank you!