New Build - 03/28/2023 - r52189

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Mar 28, 2023 13:43    Post subject: New Build - 03/28/2023 - r52189 Reply with quote
Welcome to Marvell r52189 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52148 (mirror)

OpenVPN 2.6.1: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi ~2023 ossl syslog FW tc MC pppd K nDPI ZFS Plex K IPQ XMSN WG swconfig inadyn hostapd mwlwifi swconfig
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Tue Mar 28, 2023 14:17    Post subject: Reply with quote
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r52189 std (03/28/23)
Kernel Version Linux 4.9.337 #3717 SMP Tue Mar 28 02:52:06 +07 2023 armv7l
Current Time Tue, 28 Mar 2023 17:14:52
Uptime 10 min

update-browser waterfox, I switched from partition one on the linksys firmware, all ok
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation 1Gbps
IPv6 Type DHCPv6 with Prefix Delegation-On - Ok
Operating Mode Gateway/AP
Shortcut Forwarding Engine-On
Schedule Reboot-On,
Web Access Protocol - HTTPS,
SSH (public key)-ok
Port Forwarding - Ok,
USB - System Log -Ok
Schedule Reboot - At a Set Time - On


After configuring the settings, I rebooted the router every time!

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Extension Channel LL, Short GI, Short Preamble, Single User Beamforming, Radio Scheduling, 30TX Power-26Bm ,TX Antenna Chains-1+2+3+4, RX Antenna Chains-1+2+3+4, Enable-WPA2 Personal-CCMP-128 (AES), Regulatory Domain Romania

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N, Width VHT 40 Mhz-Wireless Channel-11, Extension Channel Lower, Short Preamble, Short GI, Radio Scheduling,TX Power-20dBm ,TX Antenna Chains-1+2+3+4, RX Antenna Chains-1+2+3+4 Enable-WPA2 Personal-CCMP-128 (AES)


I want to say that this firmware is something, for the first time I see 6jitter and 10ms ping in speed test 4 in speed test on the phone, on the smart TV I am connected and everything is played without interruptions.



a negative remark would be that after switching from partition one with the linksys software, the router no longer loads its firmware with ddwrt and loses ping


thank you brainslayer and everyone involved in the development of dd-wrt!

something new for me, I don't know if it is correct?

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results


Last edited by oliver44 on Wed Mar 29, 2023 16:34; edited 1 time in total
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Mar 28, 2023 15:50    Post subject: Reply with quote
oliver44 wrote:
I want to say that this firmware is something, for the first time I see 6jitter and 10ms ping in speed test 4 in speed test on the phone, on the smart TV I am connected and everything is played without interruptions.
Awesome, thank you! Switch Config appears correct.
oliver44 wrote:
update-browser waterfox, I switched from partition one on the linksys firmware, all ok
a negative remark would be that after switching from partition one with the linksys software, the router no longer loads its firmware with ddwrt and loses ping
Well, interesting but you should know by now that retaining stock firmware has been totally pointless over 5 years.
Boot to another environment nvram config is now dirty, reset and reconfigure manually but again why go in circles.
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Tue Mar 28, 2023 18:28    Post subject: Reply with quote
what does this mean, after a reboot I found it disabled, if i activate it I have internet only on the wifi side!
_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Tue Mar 28, 2023 18:56    Post subject: Reply with quote
Visual artifact reboot saved r52189 build configuration but in both cases VLANs was disabled before / after reboot.
Unless you want to correctly configure and test VLANs I suggest you keep it disabled, as this has been the default.
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Tue Mar 28, 2023 19:38    Post subject: Reply with quote
i suspect that the functionality has not been extensively tested on marvel routers

https://svn.dd-wrt.com/changeset/52115

but if you don't know anything about VLAN and don't use VLAN then you don't need to activate TAB

but you can post the output of "swconfig dev switch0 show" 1x with tab disabled and 1x with enabled.
that can show us the difference.

On my R7800 the tab works fine, with the "standard settings" there is no difference between enabled and disabled.
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Wed Mar 29, 2023 2:05    Post subject: Reply with quote
Code:
Using username "root".
Pre-authentication banner message from server:
| DD-WRT v3.0-r52189 std (c) 2023 NewMedia-NET GmbH
| Release: 03/28/23
| Board: Linksys WRT1900ACS v2
root@DD-WRT:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x004e: (0) 1 2 3 6
        qmode: 0
        pvid: 0
        link: port:0 link:down
Port 1:
        mask: 0x004d: 0 (1) 2 3 6
        qmode: 0
        pvid: 0
        link: port:1 link:down
Port 2:
        mask: 0x004b: 0 1 (2) 3 6
        qmode: 0
        pvid: 0
        link: port:2 link:down
Port 3:
        mask: 0x0047: 0 1 2 (3) 6
        qmode: 0
        pvid: 0
        link: port:3 link:up speed:1000baseT full-duplex
Port 4:
        mask: 0x0020: (4) 5
        qmode: 0
        pvid: 0
        link: port:4 link:up speed:1000baseT full-duplex
Port 5:
        mask: 0x0010: 4 (5)
        qmode: 0
        pvid: 0
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x000f: 0 1 2 3 (6)
        qmode: 0
        pvid: 0
        link: port:6 link:up speed:1000baseT full-duplex




please explain exactly what I have to do, how the command show in the command line: 1x with tab disabled and 1x with enabled.that can show us the difference.

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Mar 29, 2023 2:21    Post subject: Reply with quote
Enable VLANs in Switch Config tab, same as before. Confirm internet limited, only wifi. Run same command again.
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Wed Mar 29, 2023 12:26    Post subject: Reply with quote
Router/Version: Linksys WRT1200AC / V1
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23) / Linux 4.9.337 #3717 SMP Tue Mar 28 02:52:06 +07 2023 armv7l
Previous/Reset: r52148 / No
Mode/Status: WAP, USB, NAS / Working
Issues/Errors: After 6 hours, everything seems OK.

Web upgrade.
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Wed Mar 29, 2023 12:37    Post subject: Reply with quote
Maybe this will be of use (for WRT1200AC, which is similar to WRT1900). With VLAN on, only Wifi connection is possible. Configured as WAP, although this probably doesn't affect the outputs..

WRT1200AC (V1) - VLAN DISABLED

Code:
# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x004e: (0) 1 2 3 6
        qmode: 0
        pvid: 0
        link: port:0 link:up speed:1000baseT full-duplex
Port 1:
        mask: 0x004d: 0 (1) 2 3 6
        qmode: 0
        pvid: 0
        link: port:1 link:up speed:1000baseT full-duplex
Port 2:
        mask: 0x004b: 0 1 (2) 3 6
        qmode: 0
        pvid: 0
        link: port:2 link:up speed:1000baseT full-duplex
Port 3:
        mask: 0x0047: 0 1 2 (3) 6
        qmode: 0
        pvid: 0
        link: port:3 link:up speed:100baseT full-duplex
Port 4:
        mask: 0x0020: (4) 5
        qmode: 0
        pvid: 0
        link: port:4 link:up speed:1000baseT full-duplex
Port 5:
        mask: 0x0010: 4 (5)
        qmode: 0
        pvid: 0
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x000f: 0 1 2 3 (6)
        qmode: 0
        pvid: 0
        link: port:6 link:up speed:1000baseT full-duplex


WRT1200AC (V1) - VLAN ENABLED

Code:
# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x0000: (0)
        qmode: 3
        pvid: 1
        link: port:0 link:up speed:1000baseT full-duplex
Port 1:
        mask: 0x0000: (1)
        qmode: 3
        pvid: 1
        link: port:1 link:up speed:1000baseT full-duplex
Port 2:
        mask: 0x0000: (2)
        qmode: 3
        pvid: 1
        link: port:2 link:up speed:1000baseT full-duplex
Port 3:
        mask: 0x0000: (3)
        qmode: 3
        pvid: 1
        link: port:3 link:up speed:100baseT full-duplex
Port 4:
        mask: 0x0000: (4)
        qmode: 3
        pvid: 2
        link: port:4 link:up speed:1000baseT full-duplex
Port 5:
        mask: 0x0000: (5)
        qmode: 3
        pvid: 2
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x0000: (6)
        qmode: 3
        pvid: 1
        link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
        port_based: 0
        vid: 1
        ports: 0 1 2 3 6
VLAN 2:
        port_based: 0
        vid: 2
        ports: 4 5
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Wed Mar 29, 2023 13:02    Post subject: Reply with quote
Actually looks right, ever tried if the LAN ports work after a reboot?
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Wed Mar 29, 2023 13:13    Post subject: Reply with quote
blkt wrote:
Enable VLANs in Switch Config tab, same as before. Confirm internet limited, only wifi. Run same command again.


Code:
root@DD-WRT:~# swconfig dev switch0 show
Global attributes:
        enable_vlan: 0
Port 0:
        mask: 0x0000: (0)
        qmode: 3
        pvid: 1
        link: port:0 link:down
Port 1:
        mask: 0x0000: (1)
        qmode: 3
        pvid: 1
        link: port:1 link:down
Port 2:
        mask: 0x0000: (2)
        qmode: 3
        pvid: 1
        link: port:2 link:down
Port 3:
        mask: 0x0000: (3)
        qmode: 3
        pvid: 1
        link: port:3 link:down
Port 4:
        mask: 0x0000: (4)
        qmode: 3
        pvid: 2
        link: port:4 link:down
Port 5:
        mask: 0x0000: (5)
        qmode: 3
        pvid: 2
        link: port:5 link:up speed:1000baseT full-duplex
Port 6:
        mask: 0x0000: (6)
        qmode: 3
        pvid: 1
        link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
        port_based: 0
        vid: 1
        ports: 0 1 2 3 6
VLAN 2:
        port_based: 0
        vid: 2
        ports: 4 5


_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Wed Mar 29, 2023 13:16    Post subject: Reply with quote
@ho1Aetoo
No, after disabling VLAN again and rebooting I couldn't connect with LAN at all. Only factory reset restored it.
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Wed Mar 29, 2023 13:23    Post subject: Reply with quote
But I did not ask about that.
I meant "enable VLAN", then press apply and then reboot the router - and I asked if then the LAN ports work.


If you disable the VLANs, the router should automatically reboot with the first port configuration.
Is this not the case?

I need a confirmation and before that I do not forward.

Edit: oh well, restoring a backup should fix it too, no idea why users always want to reset their routers (it's just nvram parameters)

Edit2: it's also a bad idea to test this on a WAP.
If your WLAN does not have its own DHCP server then you will lock yourself out.


Last edited by ho1Aetoo on Wed Mar 29, 2023 14:49; edited 1 time in total
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Wed Mar 29, 2023 13:52    Post subject: Reply with quote
Linksys WRT1900ACS v2

root@DD-WRT:~# swconfig dev switch0 show
Global attributes:
enable_vlan: 0
Port 0:
mask: 0x0000: (0)
qmode: 3
pvid: 1
link: port:0 link:down
Port 1:
mask: 0x0000: (1)
qmode: 3
pvid: 1
link: port:1 link:down
Port 2:
mask: 0x0000: (2)
qmode: 3
pvid: 1
link: port:2 link:down
Port 3:
mask: 0x0000: (3)
qmode: 3
pvid: 1
link: port:3 link:up speed:1000baseT full-duplex
Port 4:
mask: 0x0000: (4)
qmode: 3
pvid: 2
link: port:4 link:up speed:1000baseT full-duplex
Port 5:
mask: 0x0000: (5)
qmode: 3
pvid: 2
link: port:5 link:up speed:1000baseT full-duplex
Port 6:
mask: 0x0000: (6)
qmode: 3
pvid: 1
link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
port_based: 0
vid: 1
ports: 0 1 2 3 6
VLAN 2:
port_based: 0
vid: 2
ports: 4 5
[/code]

after rebooting the router, the wifi part no longer has internet, only access to the router is possible and and after unchecking Vlans, rebooting the router, everything returns to normal!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum