[blkt]

Welcome to Atheros r52189 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 52148 (mirror)

• OpenVPN 2.6.1: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi ~2023 ossl syslog FW tc MC pppd K nDPI ZFS Plex K IPQ XMSN WG swconfig inadyn hostapd mwlwifi swconfig
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• Bad blocks handling has been reworked again: R7800, XR450, XR500, IPQ based device w/ defective NAND, boot loops etc.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[egc]

Router Model: Linksys EA8500

Firmware Version: Firmware Version: DD-WRT v3.0-r52189M Community Build by EGC (03/28/23)

Upgraded from: DD-WRT v3.0-r52148M Community Build by EGC (03/26/23)
Reset: No not this time

Status: Up and running for 6 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
IPv6 working.

Errors: Nothing encountered at this moment

Big Thanks to the devs!!

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r52189 std (03/28/23)
Linux 4.9.337 #1739 SMP Tue Mar 28 02:02:03 +07 2023 armv7l
GUI install over r52095
all good

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r52189) / Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52148 std (03/26/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[ho1Aetoo]

Router/Version: R7800
File/Kernel: Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: r52171 / no
Mode/Status: Gateway / working up since 14h
Services Used: PPPoE,DHCP,DHCP-Reservation,Dnsmasq + PiHole,DDNS,SSH ed25519,WiFi 2,4Ghz + 5Ghz AP's + VAP's Vanilla,USB,Port forwarding,QoS
Issues/Errors: some VHT160 channels still a bit broken

[matjazk]

Router/Version: Netgear Nighthawk X10
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23) / Linux 4.9.337 #665 SMP Sun Mar 26 02:43:53 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r52148 std (03/26/23) / No
Mode/Status: Gateway, VLAN, VAP, USB, NAS, Wireguard / Working
Issues/Errors: None so far.

The "crashing" Switch Config tab from the previous version is gone from the Setup tab. It is still accessible at https://MY_ROUTER_NAME_OR_IP/Vlan.asp, but does not crash any more and probably does nothing (yet).

[ho1Aetoo]

the tab is currently only used to display the port status on the R9000 and has no function according to BS

https://svn.dd-wrt.com/changeset/52191

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r52189 std (03/28/23)
Kernel: Linux 4.9.337 #1739 SMP Tue Mar 28 02:02:03 +07 2023 armv7l
Reset: NO ....GUI upgrade from r52095
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r52189 std (03/28/23)
Kernel: Linux 4.9.337 #1739 SMP Tue Mar 28 02:02:03 +07 2023 armv7l
Reset: NO ....GUI upgrade from r52095
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: None

Working for me.....

[KACTET]

Router/Version: Netgear XR500
Update method:WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: r52148 / no
Mode/Status: Gateway / Up and running for 2:42 hours
Issues/Errors: Nothing significant
____________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #167741 Tue Mar 28 05:21:31 +06 2023 mips
Previous/Reset: r52148 / no
Mode/Status: AP wired and wireless / Up and running for 1:31 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23)
Previous/Reset: DD-WRT v3.0-r52148 std (03/26/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[Daaaaan]

Router Model: Archer C7 v2

Firmware Version: DD-WRT v3.0-r52189 std (03/28/23)

Upgraded from: DD-WRT v3.0-r30949 std (12/15/16) (yes, I'm serious).

Upgrade Method: web admin panel. Did not reset to defaults.

Status: Up and running for 3 hours, basic setup as wifi AP, 2.4 GHz and 5 GHz. 5GHz working again (yeah, it wasn't working for 6+ years, but my internet is now fast enough to make use of it, lololol).

Errors: Nothing encountered at this moment

[mrjcd]

'still worky ok'

[matjazk]

Router/Version: Netgear XR500
File/Kernel: DD-WRT v3.0-r52189 std (03/28/23) - Linux 4.9.337 #1741 SMP Tue Mar 28 02:25:43 +07 2023 armv7l
Previous/Reset: DumaOS 2.0.0.28 /Yes
Mode/Status: WAP for now / Working
Issues/Errors: None.

First flash from DumaOS to DD-WRT. Everything went smoothly, no bad blocks.

[jwieland]

Router/Version: Netgear R7800
File/Kernel: dd-wrt-webupgrade.bin / 4.9.337
Previous/Reset: r52148 / No
Mode/Status: WAP-router / Operational
Issues/Errors: None.

Flashed from the command line.

[Wildlion]

Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r52189 std)
Kernel: Linux 3.10.108-d11 #129658 Tue Mar 28 03:49:31 +06 2023 mips
Status: working
Reset: No
Notes on configuration:

Station

Errors:

1. 5Ghz wireless light is not on (2.4Ghz light works)

Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r52189 std)
Kernel: Linux 3.10.108-d11 #129656 Tue Mar 28 03:32:13 +06 2023 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:

None

Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r52189 std)
Kernel: Linux 3.18.140-d6 #167767 Tue Mar 28 06:03:28 +06 2023 mips
Status: Working
Reset: None
Notes on configuration:

DNSMasq
Virtual wireless with bridging x2
multiple DHCP server

Errors:

None