Posted: Thu Mar 23, 2023 4:40 Post subject: New Build - 03/23/2023 - r52095
Welcome to Broadcom r52095 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Thu Mar 23, 2023 12:03 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r52095 std (03/23/23) Kernel: Linux 4.4.302-st38 #8967 SMP Thu Mar 23 03:25:53 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 03-05-2023-r51937 Status: Working really, really well so far!!! 5.8GHz working properly; still testing. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 56.9 °C / WL0 49.1 °C / WL1 50.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Thanks to everyone who contributes on a regular basis to this project!
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Filesize:
64.43 KB
Viewed:
2638 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Asus RT-N66U
File: dd-wrt.v24-52095_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r52095 big (03/23/23) (prev. DD-WRT v3.0-r52081 big (03/21/23))
Kernel: Linux 4.4.302-st38 #22590 Thu Mar 23 05:02:47 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed today, OK.
Joined: 18 Mar 2014 Posts: 12881 Location: Netherlands
Posted: Thu Mar 23, 2023 16:41 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r52095M Community Build (03/23/23)
Kernel Version: Linux 4.4.302-st38 #1 SMP Thu Mar 23 13:20:39 CET 2023 armv7l
Upgraded from DD-WRT v3.0-r52054M Community Build (03/17/23)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NAS and ksmbd working.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Thu Mar 23, 2023 19:03 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r52095 std (03/23/23)
Kernel Version Linux 4.4.302-st38 #8967 SMP Thu Mar 23 03:25:53 +06 2023 armv7l
update: CLI r51887 > r52095
reset: NO
mode: Gateway (look at my sig)
status: Operational 12h+
errors: Nothing new, yet... Thanks BS ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Got a new old Asus rt-ac88u, flashed this firmware, and all the functions I needed work with no issues.
Router Model Asus RT-AC88U
Firmware Version DD-WRT v3.0-r52095 std (03/23/23)
Kernel Version Linux 4.4.302-st38 #8972 SMP Thu Mar 23 04:07:15 +06 2023 armv7l
CPU Model Broadcom BCM4709
CPU Cores2
CPU Features EDSP FASTMULT HALF TLS
CPU Clock1400 MHz
Sorry if I didn't follow the pattern everyone is using _________________ Asus RT-AC88U Donations
Last edited by Jen1 on Thu Apr 13, 2023 18:53; edited 1 time in total
Router/Version: ASUS RT-N66U
File/Kernel: dd-wrt.v24-52095_NEWD-2_K3.x-big-RT-N66U.trx
Previous/Reset: Migrated from https://github.com/john9527/asuswrt-merlin Mode/Status: Home router/access point with OpenVPN, JFFS2 enabled
Issues/Errors: OK. However, router-ui and telnet seems to die after a couple of minutes if usb storage stick is plugged in (worked with the merlin build, though). Seems to work fine without the stick...
I'm a new dd-wrt user. Migrated because the merlin lts builds seem not be updated anymore. In addition, dd-wrt is seemingly much more feature rich.
Last edited by tsjk on Sun Mar 26, 2023 8:22; edited 1 time in total
Router/Version: Linksys XAC1900 (EA6900+XVortexCFE)
Firmware: DD-WRT v3.0-r52095 std (03/23/23)
Previous: Fresh Tomato
Update Method: SSH / CLI using PuTTY, mtd linux
Mode/Status: Gateway / Ok
Reset: Yes
Setup Using: 2.4 GHz, , 5.0 GHz, IPv4, DHCP, jffs mounted opt, NTP Client, Entware, Adblock script, clear 12mo+ & unused nvram stuff.
Issues/Errors: Pretty good, no issues so far.
IPv6 confusing, would be nice to have one click setup like IPv4 dhcp client mode with firewall, dns leak protection etc.
USB seems to mount to /tmp/mnt/sda1 not mnt/sda1
Router/Version: Linksys WRT54GL v1.1
Update method:WebUpgrade / TFTP
File/Kernel: dd-wrt.v24 mini generic 50841 / Linux 2.4.37 #71341 Thu Mar 23 02:26:41 +06 2023 mips
Previous/Reset: dd-wrt.v24 mini generic r51530 / yes
Mode/Status: AP wired and wireless / Up and running for 1 hours
Issues/Errors: yes, bad flash
The update was successful, the settings were saved.
But after the reboot, the diodes flash and the ping is TTL=100. _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
