Archer C7 can't connect to PPPoE

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2
Author Message
Per Yngve Berg
DD-WRT Guru


Joined: 13 Aug 2013
Posts: 6856
Location: Romerike, Norway

PostPosted: Thu Mar 23, 2023 19:19    Post subject: Reply with quote
Have you set the WAN to the correct interface in the Networking tab?

vlan100 or eth0.100
Sponsor
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Thu Mar 23, 2023 19:24    Post subject: Reply with quote
Where should the interface come from?
This is still VLAN2 which has the VLAN ID 100
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Thu Mar 23, 2023 19:42    Post subject: Reply with quote
Another possibility would be to tag the WAN port:

1. update to build r52095
2. delete the swconfig commands
3. activate the "switch config" tab
4. set the WAN port to VLAN2
5. set the LAN ports to VLAN1
6. rename VLAN2 to VLAN100
7. enable tagging for the WAN port
8. in the networking tab change the WAN port to VLAN100
9. reboot the router
10. post the output of "swconfig dev switch0 show"

if it makes a difference ...
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum