New Build - 03/18/2023 - r52054

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5  Next
Author Message
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1020

PostPosted: Sun Mar 19, 2023 17:37    Post subject: Reply with quote
ho1Aetoo wrote:
This may be because you are using unbridged interfaces like VAPs?

I have never been able to activate this with unbridged VAPs so I can't test this quickly without deleting my VAPs.


and I have an unbridged VAP, so I guess I am in the same place. No harm, and nothing malfunctioning. Just wondered.

_________________
Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
Sponsor
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Sun Mar 19, 2023 21:14    Post subject: Reply with quote
I had the same experience a few months ago, no SFE with unbridged VAPS. I was told that this is a feature. Now I have bridged VAPs (properly isolated for IoT) and SFE is enabled.
jwieland
DD-WRT User


Joined: 31 May 2018
Posts: 72

PostPosted: Mon Mar 20, 2023 1:50    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: ??/4.9.337
Previous/Reset: r51937/no
Mode/Status: Router Wireless AP/operational
Issues/Errors: None

Loaded via cli
Uptime 22 hours

_________________
Netgear R9000
Netgear R7800 (spare)
Linksys WRT1200ac v2 (spare)
unknownsoldierx
DD-WRT User


Joined: 21 Dec 2007
Posts: 80

PostPosted: Mon Mar 20, 2023 2:24    Post subject: Reply with quote
blkt wrote:
hebeda wrote:
dont use tftp2 on windows for tftp flash , this wont work for xr450/xr500/r7800, it will abort after 60%

use TFTPD64 instead , this works all the time ...

https://pjo2.github.io/tftpd64/
Totally agree but something strange happened recently as the downloads repository or bitbucket has disappeared.
Here is the old website with tftpd32.452.zip and softpedia mirror tftpd64.464.zip. Save copies, also try nmrpflash.


I followed the link to gitub. There's an issue discussion the missing repo with a link to a new repo.

https://github.com/kr105/tftpd64/releases

_________________
Netgear R7800
DD-WRT v3.0-r51011 std (12/12/22)
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Mon Mar 20, 2023 4:21    Post subject: Reply with quote
Home Main Gateway Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52054 std (03/18/23)
Kernel Version: Linux 4.9.337 #1691 SMP Sat Mar 18 04:09:05 +07 2023 armv7l
Previous/Reset: r51937 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6

Running for over 19 hours.


Home Main AP Router

Router/Version: R7800
File/Kernel: DD-WRT v3.0-r52054 std (03/18/23)
Kernel Version: Linux 4.9.337 #1691 SMP Sat Mar 18 04:09:05 +07 2023 armv7l
Previous/Reset: r51937 / No, CLI Update-> reboot & Power Cycle
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: none / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba

Fixed: 5Ghz LED is Working since r51887!

Running for over 22 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12889
Location: Netherlands

PostPosted: Mon Mar 20, 2023 7:13    Post subject: Reply with quote
matjazk wrote:
I had the same experience a few months ago, no SFE with unbridged VAPS. I was told that this is a feature. Now I have bridged VAPs (properly isolated for IoT) and SFE is enabled.


That is really bad advice (besides you cannot isolate bridged VAP's, bridged in the meaning that the interfaces are bridged to the same bridge).

When using virtual interfaces SFE is disabled for a reason (and yes you can manually enable it again).

SFE is a kind of shortcut and when using virtual interfaces this shortcut can get confused and can route traffic to the wrong interface.

If and when this happens is dependant on the traffic.

If there is only one client which alternates its traffic between interfaces it will work, but multiple users using all interfaces (and especially starting traffic at the same time) it could produce strange routing errors.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Mon Mar 20, 2023 8:03    Post subject: Reply with quote
@egc I never said that they are on the same bridge (br0). Actually I put them on a separate bridge, vlan+vap. I used your instructions (Having fun...). Btw, a sincere thank you for this. Do your further reservations regarding SFE still hold in this case?

Also, for unbridged vap, you can manually enable SFE, but it gets disabled again.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12889
Location: Netherlands

PostPosted: Mon Mar 20, 2023 8:12    Post subject: Reply with quote
matjazk wrote:
@egc I never said that they are on the same bridge (br0). Actually I put them on a separate bridge, vlan+vap. I used your instructions (Having fun...). Btw, a sincere thank you for this. Do your further reservations regarding SFE still hold in this case?

Also, for unbridged vap, you can manually enable SFE, but it gets disabled again.


Yes you can have the same problems in your setup as you have one real and one virtual interface.
But as said if and when you get into trouble is dependant on traffic/clients.

As the kids are on university I have a household of two and most things are wired.
I once tried it with SFE enabled (I have a VAP for a few IoT things) for a couple of weeks without any apparent problem but I do not need SFE as my R7800 does about 800 Mb also without SFE so I have it disabled.

P.S. You can manually enable SFE by loading the fast classifier module

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
husky55
DD-WRT User


Joined: 19 Nov 2008
Posts: 274
Location: Madison, CT, US

PostPosted: Mon Mar 20, 2023 11:58    Post subject: Reply with quote
[quote=Totally agree but something strange happened recently as the downloads repository or bitbucket has disappeared.
Here is the old website with tftpd32.452.zip and softpedia mirror tftpd64.464.zip. Save copies, also try nmrpflash.[/quote]

Much appreciated!!!

_________________
Netgear R7800(2), R7500v2(2) WDS, Asus RT-AC68R (2)
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1020

PostPosted: Mon Mar 20, 2023 12:01    Post subject: Reply with quote
egc wrote:
matjazk wrote:
I had the same experience a few months ago, no SFE with unbridged VAPS. I was told that this is a feature. Now I have bridged VAPs (properly isolated for IoT) and SFE is enabled.


That is really bad advice (besides you cannot isolate bridged VAP's, bridged in the meaning that the interfaces are bridged to the same bridge).

When using virtual interfaces SFE is disabled for a reason (and yes you can manually enable it again).

SFE is a kind of shortcut and when using virtual interfaces this shortcut can get confused and can route traffic to the wrong interface.

If and when this happens is dependant on the traffic.

If there is only one client which alternates its traffic between interfaces it will work, but multiple users using all interfaces (and especially starting traffic at the same time) it could produce strange routing errors.


So, I'll leave that one alone. Smile It is off for a reason, a good reason, and I plan on keeping my VAP

_________________
Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 353
Location: Szczecin, Poland EU

PostPosted: Tue Mar 21, 2023 18:25    Post subject: New Build - 03/18/2023 - r52054 Reply with quote
Router/Version: Tp-Link TL-WDR3600 v 1.5
Kernel: Linux 3.10.108-d11 #128876 Sat Mar 18 05:27:51 +06 2023 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: Nothing significant, some yellow marked events in log.
Status: Working
Uptime: almost 3 days

Router working good. I have some yellow marked events in log. I'm attach logs for fix possible issues.
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700

PostPosted: Tue Mar 21, 2023 18:42    Post subject: Reply with quote
hebeda wrote:
dont use tftp2 on windows for tftp flash , this wont work for xr450/xr500/r7800, it will abort after 60%

use TFTPD64 instead , this works all the time ...

https://pjo2.github.io/tftpd64/
blkt wrote:
Totally agree but something strange happened recently as the downloads repository or bitbucket has disappeared.
Here is the old website with tftpd32.452.zip and softpedia mirror tftpd64.464.zip. Save copies, also try nmrpflash.
unknownsoldierx wrote:
I followed the link to gitub. There's an issue discussion the missing repo with a link to a new repo.

I did too and intentionally did not link it as they are not the originals, but compiled from source by somebody else.
The old website of course is legit, also I matched softpedia mirror file against a previous download from bitbucket.

https://github.com/digitalcardboard/chocolatey-packages/raw/master/manual/tftpd32/application/tftpd32.464.zip
https://github.com/digitalcardboard/chocolatey-packages/raw/master/manual/tftpd32/application/tftpd64.464.zip
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1940

PostPosted: Tue Mar 21, 2023 19:24    Post subject: Reply with quote
The original page/placeholder was tftpd32.jounin.net, which pointed to http://philippe.jounin.pagesperso-orange.fr/tftpd32_download.html and now points to https://pjo2.github.io/tftpd64/ ... next up, how we replaced vacuum tube computers with silicon chips <lol>
_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5700

PostPosted: Tue Mar 21, 2023 19:28    Post subject: Reply with quote
Thank you, but this fun fact has nothing to do with original matter or unofficial compilations linked in github issues.
The chocolatey packages also match original bitbucket repository downloads of zip portables before it disappeared.
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1940

PostPosted: Tue Mar 21, 2023 19:38    Post subject: Reply with quote
Well, the https://pjo2.github.io/tftpd64/ is crap, it seems. Looks as if the entire https://bitbucket.org/phjounin/ bitbucket repos are gone completely, and the "new" https://github.com/PJO2/tftpd64 github repository is complete shit as well. The only thing remaining is the personal site at http://philippe.jounin.pagesperso-orange.fr/tftpd32_download.html and it is incomplete. Mr. Jounin must've let life move on without interjection...

Ferris Bueller wrote:
Life moves pretty fast. If you don't stop and look around once in a while, you could miss it.

#yesiknowiambeingredundant
#itsforhumornothingmore
#learntolaughonceinawhile
#quitbeingsuchatightass

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
Goto page Previous  1, 2, 3, 4, 5  Next Display posts from previous:    Page 4 of 5
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum