[dewayne221]

[kernel-panic69]

Specific information would sure help us to understand where you went askew. Build numbers, file names, etc.

[ho1Aetoo]

Since the badblocks fix I have also had problems several times.
Often when I flashed back from a newer build to an older build via WebIF, my r7800 would no longer boot.

So I have flashed via TFTP 4-5 times in the last few days.
TFTP has always worked.

I have also flashed r52054 via TFTP today.

very myterious

[mrjcd]

few minutes ago tried to GUI install over r52004 on WNDR700v4
TOTAL BULLSHIT bootloop.
Power off/on still bootloop
Power on doing a reset -- still bootloop.

twas setup as WAP with isolated guest net & OVPN server

This is at far end of my WDS net at other house but I'm sitting right beside it while trying upgrade.
Glad I left the old WNR2000v3 w/r43845 sitting close by setup same way minus ovpn server.
gonna take the WNDR3700v4 back to homeworld and try a TFTP and fix the poor thang

[dewayne221]

[hebeda]

dont use tftp2 on windows for tftp flash , this wont work for xr450/xr500/r7800, it will abort after 60%

use TFTPD64 instead , this works all the time ...

https://pjo2.github.io/tftpd64/

[Alozaros]

hmm the only mystery i had with the last few builds is my 1043v2 flashed via GUI(WEB interface)..
on flash it does not reboot and ssh not available anymore..which is understandable as in order to make some space in the ram to upload the firmware WEB flash does turn off some services ..but no idea why reboot doesn't happen...I always use pale-moon private mode...

to be precise i did flash the current with no problems 52054..so no idea where it comes form...also R7800 via CLI no problem reboots and runs all well..happy days so far...no complains on it...

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r52054 std (03/18/23)
Previous/Reset: DD-WRT v3.0-r52020 std (03/14/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[mrjcd]

had to TFTP this guy factory.img


then GUI installed this guy:


used good BU of this build I always have and he's back to all good


too much for an old man & when it interrupts others so I prolly leave on this good build

[ramblin]

I know of many reported problems with a lot of the recent builds, especially my routers and like. Myself, I have very few issues, but I must say if you go by what is showing in the logs this build is great. Uptime 7 hrs. and only a few entries. Auth request, authenticated, few handshakes. Thats it. NO kern.info, debug, notice, warnings. Nothing ! I don`t know what some of you guys know, but less is better. Right ??

[KACTET]

Router/Version: Netgear XR500
Update method: WebUpgrade
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.337 #1691 SMP Сб 18 марта 04:09:05 +07 2023 armv7l
Previous/Reset: 52004 / no
Mode/Status: Gateway / Up and running for 2:54 hours
Issues/Errors: Nothing significant
________________________________________________________________________________________________
Router/Version: TP-Link TL-WR841ND v11
Update method: WebUpgrade
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #166858 Sat Mar 18 06:54:34 +06 2023 mips
Previous/Reset: r52020 / no
Mode/Status: AP wired and wireless / Up and running for 4:01 hours
Issues/Errors: Nothing significant

The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus!

[nyddwrtuser330]

R7800
no reset
previous 52020M

Upgrade went smooth, Channel list ok for main WL, no issues with signal strength ( if there were issues the WDS link would show it)

WDS STA 5GHz 80 149 UU, 2.4GHz vanilla

Only issue is the VAP on top on the 5GHz station still isnt functioning correctly. If you dont have that config, all looks good.

R9000
no reset
previous 52020

Errors:NONE - previous channel list issue is fixed

[blkt]

[MLandi]

Is it just me, or can you not enable SFE with this build?

[ho1Aetoo]

This may be because you are using unbridged interfaces like VAPs?

I have never been able to activate this with unbridged VAPs so I can't test this quickly without deleting my VAPs.