Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Fri Mar 10, 2023 6:56 Post subject:
BrainSlayer wrote:
but maybe you should try the latest and not a version one year old. there was alot done over time. there might be a issue using the distance setting. so set a distance which is higher than expected like 8000 if you have latency issues.
i use the ddwrt firmware as wds sta / ap link and as standard ap firmware every day. i dont know what your issue is
i said a month, not a year, but i tried again on the latest working build. same old, ddwrt radio is still a mess. increasing ack timing to something that high just makes everything worse.. dont believe me guess a video is needed.. nothing changes except vanilla fw -> ddwrt. everything goes from fast and low latency, high jittery throughput and latency... _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 16 Nov 2015 Posts: 6436 Location: UK, London, just across the river..
Posted: Fri Mar 10, 2023 14:07 Post subject:
iMAK wrote:
I will ignore this build of course. Which build is most stable before this one?
depends from things and services you run on your router and what router you have...for me on 1043v2 this build is stable..you can see what i run on it in my signature...
But, as its obvious that some others are complaining of no stable wifi and no ssh or bad correlation with OpenVPN client/server on the same router...or some WDS AP/client issues...
So, as much info you provide that better the answer would be... 51937 should be the one before the dramatic changes...but new build is dew soon so....patience is a virtue _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Linksys EA8500...main gateway
DD-WRT v3.0-r51976 std (03/08/23)
Linux 4.9.337 #1636 SMP Wed Mar 8 06:57:25 +07 2023 armv7l
GUI install over r51935
ol' WTH I switched both radios to DD-WRT & saved just before I done the upgrade.
looky ok so far we'll see how she goes...
root@Citadel-Station-Homeworld:~# dmesg | grep firmware
[ 4.463091] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 10.339423] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.635350] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 10.658650] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7119 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 e608f94a
[ 12.323652] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 12.323718] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 12.358130] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7119 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 e608f94a
root@Citadel-Station-Homeworld:~#
This shit NO worky for me ..keeps dropping 2.4 clients & takes forever to reconnect.
NO, logs don't show much nothing.
Although the 5GHz seemed all good.
******************
I set both radios back to VANILLA 'Saved' and rebooted router all thru GUI.
That's when it all really went to shit --- Router NEVER came back up
NO nothing. Turned off power switch & back on still nothing come up.
Wish I would have known this crap. Woulda been much easier to boot her back into previous--restore it to all good.
Glad I still have the oldass 2nd WNDR3700v4 r51887 config as main.
ain't near the speed as EA8500 messin 'round on my LAN but will worky till I get time to do button reset & resort earlier build backup on her
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Sat Mar 11, 2023 1:45 Post subject:
mrjcd wrote:
Code:
root@Citadel-Station-Homeworld:~# dmesg | grep firmware
[ 4.463091] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[ 10.339423] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 10.635350] ath10k_pci 0000:01:00.0: found firmware features ie (8 B)
[ 10.658650] ath10k_pci 0000:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7119 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 e608f94a
[ 12.323652] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[ 12.323718] ath10k_pci 0001:01:00.0: found firmware features ie (8 B)
[ 12.358130] ath10k_pci 0001:01:00.0: firmware ver 10.4-ddwrt-9980-tW-13-7119 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate,superchannel crc32 e608f94a
root@Citadel-Station-Homeworld:~#
This shit NO worky for me ..keeps dropping 2.4 clients & takes forever to reconnect.
NO, logs don't show much nothing.
Although the 5GHz seemed all good.
******************
I set both radios back to VANILLA 'Saved' and rebooted router all thru GUI.
That's when it all really went to shit --- Router NEVER came back up
NO nothing. Turned off power switch & back on still nothing come up.
Wish I would have known this crap. Woulda been much easier to boot her back into previous--restore it to all good.
Glad I still have the oldass 2nd WNDR3700v4 r51887 config as main.
ain't near the speed as EA8500 messin 'round on my LAN but will worky till I get time to do button reset & resort earlier build backup on her
1. ddwrt ath10k is just bad
2. upon going to vanilla ath10k, the the radio fw goes into a crash loop now
r51952 is latest working build. for me anyway.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Posted: Sat Mar 11, 2023 14:17 Post subject: Upgrades
I just wanted to add another affected router.
DLink DIR-862 A1
GUI upgrade to r51976
WDS Station on 2.4GHz
AP mode on 5Ghz
Vanilla driver - 5GHz never comes up, says channel unknown, power 0dBm, etc on Wireless Status page.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Mar 11, 2023 17:31 Post subject:
Module Vlan.asp (switch configuration) is fixed for Tp_link TL-WDR3600? In any newer version than r51589, this module crashes the router. If we have our own port configuration, the router is unavailable on the GUI/SSH. Internet connection does not work. Currently I'm sticking with the build "DD-WRT v 3.0 r51589. This is the last stable version where all functions work fine. I'm looking through topics on the forum and I see that recent builds have bugs and are not fully functional.
Router: Netgear R7800
Firmware: DD-WRT v3.0-r51976 std (03/08/23)
Previous: GUI upgrade from DD-WRT v3.0-r51937 std (03/05/23)
Reset: No.
Status: Gateway / PPPoE, WAN MAC Clone, 5 GHz Mixed 80 MHz Vanilla AP, Port Forwarding, Static Leases, Wireless MAC Filter, NTP
Errors: Completely broke after update. Could not access the GUI, SSH or Telnet. No WIFI, no WAN connection. LAN still worked, could access other devices on the network.
Thought maybe it was a bad flash or gremlins from not doing a reset for so long. In hopes of fixing this, I did a hard reset and TFTP'd r51976 again. Was successful. Configured all my settings again. Hit save each time. Once I was done, I rebooted. Same problem showed up. No GUI, SSH, Telnet, WIFI or WAN connection.
Reverted back to r51937. Had to configure all my settings again for a second time. Everything works now. All of this cost me my WAN traffic data of two years. I had no backup of it.