Posted: Wed Mar 08, 2023 14:46 Post subject: New Build - 03/08/2023 - r51976
Welcome to Broadcom r51976 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
Note (by egc): if you use WireGuard and IPv6 better skip this build and wait for the next !
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 12884 Location: Netherlands
Posted: Wed Mar 08, 2023 18:37 Post subject:
Router Model: Linksys E2000 (converted N320)
Firmware Version: DD-WRT v3.0-r51976 mega (03/08/23)
Kernel Version: Linux 4.4.302-st37 #22280 Wed Mar 8 17:09:24 +06 2023 mips
Upgraded: from DD-WRT v3.0-r51937 mega (03/05/23)
Reset: No not this time
Status: Up and running for 8 hours, basic setup as Gateway, static leases, Wifi 2,4GHz working.
WireGuard client with PBR working.
WireGuard server working.
The more recent versions tested are r51937 and r51976, and as soon as I apply QoS settings (which are the last settings to setup), the router no longer responds and cannot be pinged and only way back is to use recovery.
Posted: Thu Mar 09, 2023 0:50 Post subject: Asus RT-N66R - Working
Router/Version: Asus RT-N66R
File: dd-wrt.v24-51976_NEWD-2_K3.x-big-RT-N66U.trx
Kernel: Linux 4.4.302-st37 #22276 Wed Mar 8 17:03:52 +06 2023 mips
Previous: dd-wrt.v24-51855_NEWD-2_K3.x-big-RT-N66U.trx
Reset: No
Mode: Gateway Router (with WiFi disabled; separate AP connected via LAN)
Status: All seems to be working so far for my setup. Uptime: ~8 hours
Temperatures: Not available [WiFi disabled]
Much thanks to BrainSlayer, kernel-panic69 and Zyxx for the resumption of the needed 'big' build flash files!
Posted: Thu Mar 09, 2023 0:52 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51976 std (03/08/23) Kernel: Linux 4.4.302-st37 #8877 SMP Wed Mar 8 05:11:52 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 03-05-2023-r51937 Status: Working so far; something weird going on with /etc/resolv.conf and wireless performance took a huge hit, still testing. Will post logs later. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 56.9 °C / WL0 49.8 °C / WL1 51.3 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
This one has issues, I'm rolling back to 03-05-2023-r51937
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Filesize:
58.69 KB
Viewed:
2619 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Asus RT-N66U
File: dd-wrt.v24-51976_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r51976 big (03/08/23) (prev. DD-WRT v3.0-r51838 big (02/23/23))
Kernel: Linux 4.4.302-st37 #22276 Wed Mar 8 17:03:52 +06 2023 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed one hour ago, OK.
Posted: Thu Mar 09, 2023 10:13 Post subject: Re: Netgear Nighthawk R7000
twindragon6 wrote:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51976 std (03/08/23) Kernel: Linux 4.4.302-st37 #8877 SMP Wed Mar 8 05:11:52 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 03-05-2023-r51937 Status: Working so far; something weird going on with /etc/resolv.conf and wireless performance took a huge hit, still testing. Will post logs later. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 56.9 °C / WL0 49.8 °C / WL1 51.3 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
This one has issues, I'm rolling back to 03-05-2023-r51937
Yes, does not work on R7000. Had to roll back too. No wan access _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
The more recent versions tested are r51937 and r51976, and as soon as I apply QoS settings (which are the last settings to setup), the router no longer responds and cannot be pinged and only way back is to use recovery.
QoS settings should be saved, then reboot router. If you are using any of the shortcut forwarding engine options, they cannot coexist with QoS. Procedural steps make a difference. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Posted: Sat Mar 11, 2023 0:34 Post subject: Re: Netgear Nighthawk R7000
wabe wrote:
twindragon6 wrote:
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51976 std (03/08/23) Kernel: Linux 4.4.302-st37 #8877 SMP Wed Mar 8 05:11:52 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 03-05-2023-r51937 Status: Working so far; something weird going on with /etc/resolv.conf and wireless performance took a huge hit, still testing. Will post logs later. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 56.9 °C / WL0 49.8 °C / WL1 51.3 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
This one has issues, I'm rolling back to 03-05-2023-r51937
Yes, does not work on R7000. Had to roll back too. No wan access
NTP client seems broken, never updated time automatically. SSH'ed into the router and run ntpclient server-ip time updated properly and then I had DNS/WAN working.
However, Wireguard (/etc/config/eop-tunnel.prewall) was using 98% of the CPU without any client connected.
Rolled back to r51855. _________________ 1x Netgear R7800 (latest); 3x Netgear R7000 (latest); 2x Asus RT-N16 (v3.0-r47656); 2x Fonera 2100 (v3.0-r45454).
Posted: Sat Mar 11, 2023 10:55 Post subject: Re: New Build - 03/08/2023 - r51976
Router/Version: Linksys XAC1900 pretending to be EA6900 File/Kernel: r51976 + entware Previous/Reset: Full reset after upgrading from previous DD-WRT Release Mode/Status: 2.4,5g ap Issues/Errors: USB tethering tutorial failure.
All up looking good, thanks for the constant improvements. 2.4ghz looks to be working well now.
Running remove unused nvram parameters script, oc'd from 800/533 to 1000/600, no worries with static wan address.
Would be nice to be able to plug in a cellphone and share internet across usb0 and wan
Posted: Sat Mar 11, 2023 20:08 Post subject: ASUS RT-AC68U & 2 x Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r51976 std (03/08/23) - (previous R51530)
Kernel: Linux 4.4.302-st37 #8877 SMP Wed Mar 8 05:11:52 +06 2023 armv7l
5Ghz (Mixed) with 80Mhz channel width (upper/lower): Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 1 day, 10:04
CPU Temperature: CPU 68.0 °C / WL0 46.5 °C / WL1 44.5 °C
2 x E2000
Firmware: DD-WRT v3.0-r51976 mega (03/08/23) - (previous r51530)
Kernel: Linux 4.4.302-st37 #22280 Wed Mar 8 17:09:24 +06 2023 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: 1 day, 11:15 / 1 day, 11:18
CPU Temperature: WL0 53.0 °C / WL0 49.5 °C
Thanks BrainSlayer and everyone else lending a hand.
All devices working as AP's each with individual 1Gb wired connections to main firewalls
No issues so far, will update if experiencing any.
